[2.6 patch] remove outdated OSS Changelogs

[Adrian Bunk <bunk@stusta.de>]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1


There's not much value in shipping Changelogs that weren't updated since 
at least 2.4.0 .

diffstat output:
 Documentation/sound/oss/ChangeLog.awe        |  230 -------------------
 Documentation/sound/oss/ChangeLog.multisound |  213 -----------------
 2 files changed, 443 deletions(-)


Signed-off-by: Adrian Bunk <bunk@stusta.de>

- --- linux-2.6.10-rc1-mm1-full/Documentation/sound/oss/ChangeLog.multisound	2004-10-18 23:53:45.000000000 +0200
+++ /dev/null	2004-08-23 02:01:39.000000000 +0200
@@ -1,213 +0,0 @@
- -1998-12-04  Andrew T. Veliath  <andrewtv@usa.net>
- -
- -	* Update version to 0.8.2.2
- -
- -	* Add msndreset program to shell archive.
- -
- -1998-11-11  Andrew T. Veliath  <andrewv@usa.net>
- -
- -	* msnd_pinnacle.c (mixer_ioctl): Add a mixer ioctl for
- -	SOUND_MIXER_PRIVATE1 which does a full reset on the card.
- -	(mixer_set): Move line in recording source to input monitor, aux
- -	input level added, some mixer fixes.
- -
- -1998-09-10  Andrew Veliath  <andrewtv@usa.net>
- -
- -	* Update version to 0.8.2
- -
- -	* Add SNDCTL_DSP_GETOSPACE and SNDCTL_DSP_GETISPACE ioctls.
- -
- -1998-09-09  Andrew Veliath  <andrewtv@usa.net>
- -
- -	* Update version to 0.8.1
- -	
- -	* msnd_pinnacle.c: Fix resetting of default audio parameters. Turn
- -	flush code from dsp_halt into dsp_write_flush, and use that for
- -	SNDCTL_DSP_SYNC.
- -
- -1998-09-07  Andrew Veliath  <andrewtv@usa.net>
- -
- -	* Update version to 0.8.0
- -
- -	* Provide separate signal parameters for play and record.
- -	
- -	* Cleanups to locking and interrupt handling, change default
- -	fifosize to 128kB.
- -
- -	* Update version to 0.7.15
- -
- -	* Interprocess full-duplex support (ie `cat /dev/dsp > /dev/dsp').
- -
- -	* More mutex sections for read and write fifos (read + write locks
- -	added).
- -
- -1998-09-05  Andrew Veliath  <andrewtv@usa.net>
- -
- -	* msnd_pinnacle.c: (chk_send_dsp_cmd) Do full DSP reset upon DSP
- -	timeout (when not in interrupt; maintains mixer settings).  Fixes
- -	to flushing and IRQ ref counting. Rewrote queuing for smoother
- -	playback and fixed initial playback cutoff problem.
- -
- -1998-09-03  Andrew Veliath  <andrewtv@usa.net>
- -
- -	* Replaced packed structure accesses with standard C equivalents.
- -
- -1998-09-01  Andrew Veliath  <andrewtv@usa.net>
- -
- -	* msnd_pinnacle.c: Add non-PnP configuration to driver code, which
- -	  will facilitate compiled-in operation.
- -
- -1998-08-29  Andrew Veliath  <andrewtv@usa.net>
- -
- -	* Update version to 0.7.6
- -	
- -	* msnd_pinnacle.c (dsp_ioctl): Add DSP_GETFMTS, change SAMPLESIZE
- -	  to DSP_SETFMT.
- -
- -	* Update version to 0.7.5
- -	
- -	* Create pinnaclecfg.c and turn MultiSound doc into a shell
- -	  archive with pinnaclecfg.c included.  pinnaclecfg.c can
- -	  now fully configure the card in non-PnP mode, including the
- -	  joystick and IDE controller.  Also add an isapnp conf
- -	  example.
- -
- -	* Reduce DSP reset timeout from 20000 to 100
- -
- -1998-08-06  Andrew Veliath  <andrewtv@usa.net>
- -
- -	* Update version to 0.7.2
- -	
- -	* After A/D calibration, do an explicit set to the line input,
- -	  rather than using set_recsrc
- -
- -1998-07-20  Andrew Veliath  <andrewtv@usa.net>
- -
- -	* Update version to 0.7.1
- -
- -	* Add more OSS ioctls
- -	
- -1998-07-19  Andrew Veliath  <andrewtv@usa.net>
- -
- -	* Update doc file
- -	
- -	* Bring back DIGITAL1 with digital parameter to msnd_pinnacle.c
- -	  and CONFIG_MSNDPIN_DIGITAL.  I'm not sure this actually works,
- -	  since I find audio playback goes into a very speeded mode of
- -	  operation, however it might be due to a lack of a digital
- -	  source, which I don't have to test.
- -
- -1998-07-18  Andrew Veliath  <andrewtv@usa.net>
- -
- -	* Update version to 0.7.0
- -
- -	* Can now compile with Alan Cox' 2.0.34-modular-sound patch (so
- -	  now it requires >= 2.1.106 or 2.0.34-ms) (note for 2.0.34-ms it
- -	  is in the Experimental section)
- -
- -	* More modularization, consolidation, also some MIDI hooks
- -	  installed for future MIDI modules
- -
- -	* Write flush
- -
- -	* Change default speed, channels, bit size to OSS/Free defaults
- -
- -1998-06-02  Andrew Veliath  <andrewtv@usa.net>
- -
- -	* Update version to 0.5b
- -
- -	* Fix version detection
- -	
- -	* Remove underflow and overflow resets (delay was too long)
- -
- -	* Replace spinlocked bitops with atomic bit ops
- -
- -1998-05-27  Andrew Veliath  <andrewtv@usa.net>
- -
- -	* Update version to 0.5a
- -	
- -	* Better recovery from underflow or overflow conditions
- -	
- -	* Fix a deadlock condition with one thread reading and the other
- -	  writing
- -
- -1998-05-26  Andrew Veliath  <andrewtv@usa.net>
- -
- -	* Update version to 0.5
- -	
- -	* Separate reset queue functions for play and record
- -
- -	* Add delays in dsp_halt
- -
- -1998-05-24  Andrew Veliath  <andrewtv@usa.net>
- -
- -	* Add a check for Linux >= 2.1.95
- -	
- -	* Remove DIGITAL1 input until I figure out how to make it work
- -	
- -	* Add HAVE_DSPCODEH which when not defined will load firmware from
- -	  files using mod_firmware_load, then release memory after they
- -	  are uploaded (requires reorganized OSS).
- -
- -1998-05-22  Andrew Veliath  <andrewtv@usa.net>
- -
- -	* Update version to 0.4c
- -
- -	* Hopefully fix the mixer volume problem
- -
- -1998-05-19  Andrew Veliath  <andrewtv@usa.net>
- -
- -	* Add __initfuncs and __initdatas to reduce resident code size
- -
- -	* Move bunch of code around, remove some protos
- -
- -	* Integrate preliminary changes for Alan Cox's OSS reorganization
- -	  for non-OSS drivers to coexist with OSS devices on the same
- -	  major.  To compile standalone, must now define STANDALONE.
- -
- -1998-05-16  Andrew Veliath  <andrewtv@usa.net>
- -
- -	* Update version to 0.4b
- -	
- -	* Integrated older card support into a unified driver, tested on a
- -	  MultiSound Classic c/o Kendrick Vargas.
- -
- -1998-05-15  Andrew Veliath  <andrewtv@usa.net>
- -
- -	* Update version to 0.4
- -	
- -	* Fix read/write return values
- -
- -1998-05-13  Andrew Veliath  <andrewtv@usa.net>
- -
- -	* Update version to 0.3
- -
- -	* Stop play gracefully
- -
- -	* Add busy flag
- -	
- -	* Add major and calibrate_signal module parameters
- -	
- -	* Add ADC calibration
- -
- -	* Add some OSS compatibility ioctls
- -
- -	* Add mixer record selection
- -	
- -	* Add O_NONBLOCK support, separate read/write wait queues
- -
- -	* Add sample bit size ioctl, expanded sample rate ioctl
- -
- -	* Playback suspension now resumes
- -
- -	* Use signal_pending after interruptible_sleep_on
- -	
- -	* Add recording, change ints to bit flags
- -
- -1998-05-11  Andrew Veliath  <andrewtv@usa.net>
- -
- -	* Update version to 0.2
- -
- -	* Add preliminary playback support
- -
- -	* Use new Turtle Beach DSP code
\ No newline at end of file
- --- linux-2.6.10-rc1-mm1-full/Documentation/sound/oss/ChangeLog.awe	2004-10-18 23:55:36.000000000 +0200
+++ /dev/null	2004-08-23 02:01:39.000000000 +0200
@@ -1,230 +0,0 @@
- -ver.0.4.3p4
- -	- Bug fix for invalid memory detection when initialized twice
- -	- Add sample sharing function - works together with awesfx-0.4.3p3
- -	- Add AWE_PROBE_DATA for probing sample id
- -
- -ver.0.4.3p3
- -	- Replace memset to MEMSET (for FreeBSD)
- -	- Add PAN_EXCHANGE switch
- -
- -ver.0.4.3p2
- -	- MIDI emulation device is added
- -	- Controls volume and filter targets
- -	- Include chorus/reverb/equalizer values in MISC_MODE
- -
- -ver.0.4.3p1
- -	- Change the volume calculation method
- -	- Support for Tom Lees' PnP driver (v0.3)
- -
- -ver.0.4.2d
- -	- Support for OSS/Free 3.8 on 2.0 kernels.
- -	- Support for Linux PnP driver
- -	- Support for module (for recent 2.1 kernels and RH5.0)
- -	- Support for FreeBSD-3.0 system
- -
- -ver.0.4.2c
- -	- Add a mode to enable drum channel toggle via bank number
- -	  change.
- -
- -ver.0.4.2b
- -	- Clear voice position after note on
- -	- Change nrvoices according to the current playing mode
- -
- -ver.0.4.2a
- -	- Fix a bug in pitch calculation with scale parameter
- -	- Change default chorus & reverb modes
- -
- -ver.0.4.2
- -	- Use indirect voice allocation mode; used as default mode
- -	- Add preset mapping
- -	- Free buffers when resetting samples
- -	- Set default preset/bank/drumset as variable
- -	- Fix a bug in exclusive note-off
- -	- Add channel reset control macro
- -	- Change modwheel sensitivity as variable
- -	- Add lock option in open_patch
- -	- Add channel priority mode macro, and disable it as default
- -	- Add unset effect macro
- -	- Add user defined chorus/reverb modes
- -	- Do not initialize effect parameters when allocating voices
- -	- Accept realtime filter-Q parameter change
- -	- Check value range of set/add effects
- -	- Change drum flags automatically when receiving bank #128
- -
- -ver.0.4.1	development versions
- -
- -ver.0.4.0c
- -	- Fix kernel oops when setting AWE_FX_ATTEN
- -
- -ver.0.4.0b
- -	- Do not kill_note in start_note when velocity is zero
- -
- -ver.0.4.0a
- -	- Fix a bug in channel pressure effects
- -
- -ver.0.4.0
- -	- Support dynamic buffer allocation
- -	- Add functions to open/close/unload a patch
- -	- Change from pointer to integer index in voice/sample lists
- -	- Support for Linux/Alpha-AXP
- -	- Fix for FreeBSD
- -	- Add sostenuto control
- -	- Add midi channel priority
- -	- Fix a bug in all notes off control
- -	- Use AWE_DEFAULT_MEMSIZE always if defined
- -	- Fix a bug in awe_reset causes seg fault when no DRAM onboard
- -	- Use awe_mem_start variable instead of constant
- -
- -ver.0.3.3c
- -	- Fix IOCTL_TO_USER for OSS-3.8 (on Linux-2.1.25)
- -	- Fix i/o macros for mixer controls
- -
- -ver.0.3.3b
- -	- Fix version number in awe_version.h
- -	- Fix a small bug in noteoff/release all
- -
- -ver.0.3.3a
- -	- Fix all notes/sounds off
- -	- Add layer effect control
- -	- Add misc mode controls; realtime pan, version number, etc.
- -	- Move gus bank control in misc mode control
- -	- Modify awe_operations for OSS3.8b5
- -	- Fix installation script
- -
- -ver.0.3.3
- -	- Add bass/treble control in Emu8000 chip
- -	- Add mixer device
- -	- Fix sustain on to value 127
- -
- -ver.0.3.2
- -	- Refuse linux-2.0.0 at installation
- -	- Move awe_voice.h to /usr/include/linux
- -
- -ver.0.3.1b (not released)
- -	- Rewrite chorus/reverb mode change functions
- -	- Rewrite awe_detect & awe_check_dram routines
- -
- -ver.0.3.1a
- -	- Fix a bug to reset voice counter in awe_reset
- -	- Fix voice balance on GUS mode
- -	- Make symlink on /usr/include/asm in install script
- -
- -ver.0.3.1
- -	- Remove zero size arrays from awe_voice.h
- -	- Fix init_fm routine
- -	- Remove all samples except primary samples in REMOVE_LAST_SAMPLES
- -
- -ver.0.3.0a
- -	- Add AWE_NOTEOFF_ALL control
- -	- Remove AWE_INIT_ATTEN control
- -
- -ver.0.3.0
- -	- Fix decay time table
- -	- Add exclusive sounds mode
- -	- Add capability to get current status
- -
- -ver.0.2.99e
- -	- Add #ifdef for all sounds/notes off controls.
- -	- Fix bugs on searching the default drumset/preset.
- -	- Fix usslite patch to modify the default Config.in.
- -
- -ver.0.2.99d
- -	- Fix bugs of attack/hold parameters
- -	- Fix attack & decay time table
- -
- -ver.0.2.99c
- -	- Change volume control messages (main & expression volume)
- -	  to accesspt normal MIDI parameters in channel mode.
- -	- Use channel mode in SEQ2 controls.
- -
- -ver.0.2.99b
- -	- #ifdef patch manager functions (for OSS-3.7)
- -
- -ver.0.2.99a
- -	- Fix sustain bug
- -
- -ver.0.2.99 (0.3 beta)
- -	- Support multiple instruments
- -
- -ver.0.2.0c
- -	- Add copyright notice
- -	- FreeBSD 2.2-ALPHA integration
- -
- -ver.0.2.0b
- -	- Remove buffered reading appended in v0.2.0a
- -	- Remove SMAxW register check on writing
- -	- Support Linux 2.1.x kernel
- -	- Rewrite installation script
- -
- -ver.0.2.0a
- -	- Define SEQUENCER_C for tuning.h for FreeBSD system
- -	- Improvement of sample loading speed
- -	- Fix installation script
- -	- Add PnP driver functions for ISA PnP driver support
- -
- -ver.0.2.0
- -	- Includes FreeBSD port
- -	- Can load GUS compatible patches
- -	- Change values of hardware control parameters for compatibility
- -	  with GUS driver
- -	- Accept 8bit or unsigned wave data
- -	- Accept no blank loop data
- -	- Add sample mode flags in sample_info
- -
- -ver.0.1.6
- -	- Add voice effects control
- -	- Fix awe_voice.h for word alignment
- -
- -ver.0.1.5c
- -	- Fix FM(OPL) playback problem
- -
- -ver.0.1.5b
- -	- Fix pitch calculation for fixed midi key
- -
- -ver.0.1.5a
- -	- Fix bugs in removing samples from linked list.
- -
- -ver.0.1.5
- -	- Add checksum verification for sample uploading
- -	  (not compatible from older sample_info structure)
- -	- Fix sample offset pointers to (actual value - 1)
- -	- Add sequencer command to initialize awe32
- -
- -ver.0.1.4c
- -	- Fix card detection and memory check function to avoid system crash
- -	  at booting
- -
- -ver.0.1.4b
- -	- Add release sustain mode
- -	- Initialize FM each time after loading samples
- -
- -ver.0.1.4a
- -	- Fix AWE card detection code
- -	- Correct FM initialize position 
- -	- Add non-releasing mode on voice info
- -
- -ver.0.1.4
- -	- Add AWE card and DRAM detection codes
- -	- Add FM initialization code
- -	- Modify volume control
- -	- Remove linear volume mode
- -	- Change memory management; not using malloc dynamically
- -	- Add remove-samples command
- -	- Use internal id implicitly at loading samples
- -
- -ver.0.1.3
- -	- Fix a bug on patch uploading to RAM
- -
- -ver.0.1.2
- -	- Divide to separated packages
- -	- Fix disagreed macro conditions
- -	- Fix unresolved function bugs
- -	- Integrate VoxWare and USS-Lite driver source (awe_voice.c)
- -	  and remove awe_card.c
- -
- -ver.0.1.1
- -	- Fix wrong sample numbers in sbktext
- -	- Fix txt2sfx bug
- -	- Fix pan parameter calculation
- -	- Append USS-Lite/Linux2.0 driver
- -


-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.6 (GNU/Linux)

iD8DBQFBgAoUmfzqmE8StAARArLLAKCzzpHPeLBv+nJPyuAOzbCgFPCOSACfbNJW
754rzyxZmZUkiokeUW9OLTQ=
=SKUs
-----END PGP SIGNATURE-----