From: Adrian Bunk <bunk@stusta.de>
To: linux-kernel@vger.kernel.org
Subject: [2.6 patch] telephony/ixj.c cleanup
Date: Sun, 31 Oct 2004 00:38:17 +0200 [thread overview]
Message-ID: <20041030223817.GH4374@stusta.de> (raw)
The patch below does:
- remove ixj_register and ixj_unregister
these were EXPORT_SYMBOL'ed static (sic) functions
it seems the only reason why this "worked" was that there were exactly
zero users of them...
- remove four local variables that are after this removal no longer
required
- make five functions that were needlessly global static
diffstat output:
drivers/telephony/ixj.c | 105 +---------------------------------------
1 files changed, 5 insertions(+), 100 deletions(-)
Signed-off-by: Adrian Bunk <bunk@stusta.de>
--- linux-2.6.10-rc1-mm2-full/drivers/telephony/ixj.c.old 2004-10-31 00:10:49.000000000 +0200
+++ linux-2.6.10-rc1-mm2-full/drivers/telephony/ixj.c 2004-10-31 00:23:17.000000000 +0200
@@ -406,14 +406,10 @@
return 0;
}
-static IXJ_REGFUNC ixj_DownloadG729 = &Stub;
-static IXJ_REGFUNC ixj_DownloadTS85 = &Stub;
static IXJ_REGFUNC ixj_PreRead = &Stub;
static IXJ_REGFUNC ixj_PostRead = &Stub;
static IXJ_REGFUNC ixj_PreWrite = &Stub;
static IXJ_REGFUNC ixj_PostWrite = &Stub;
-static IXJ_REGFUNC ixj_PreIoctl = &Stub;
-static IXJ_REGFUNC ixj_PostIoctl = &Stub;
static void ixj_read_frame(IXJ *j);
static void ixj_write_frame(IXJ *j);
@@ -792,97 +788,6 @@
return 0;
}
-static int ixj_register(int index, IXJ_REGFUNC regfunc)
-{
- int cnt;
- int retval = 0;
- switch (index) {
- case G729LOADER:
- ixj_DownloadG729 = regfunc;
- for (cnt = 0; cnt < IXJMAX; cnt++) {
- IXJ *j = get_ixj(cnt);
- while(test_and_set_bit(cnt, (void *)&j->busyflags) != 0) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1);
- }
- ixj_DownloadG729(j, 0L);
- clear_bit(cnt, &j->busyflags);
- }
- break;
- case TS85LOADER:
- ixj_DownloadTS85 = regfunc;
- for (cnt = 0; cnt < IXJMAX; cnt++) {
- IXJ *j = get_ixj(cnt);
- while(test_and_set_bit(cnt, (void *)&j->busyflags) != 0) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1);
- }
- ixj_DownloadTS85(j, 0L);
- clear_bit(cnt, &j->busyflags);
- }
- break;
- case PRE_READ:
- ixj_PreRead = regfunc;
- break;
- case POST_READ:
- ixj_PostRead = regfunc;
- break;
- case PRE_WRITE:
- ixj_PreWrite = regfunc;
- break;
- case POST_WRITE:
- ixj_PostWrite = regfunc;
- break;
- case PRE_IOCTL:
- ixj_PreIoctl = regfunc;
- break;
- case POST_IOCTL:
- ixj_PostIoctl = regfunc;
- break;
- default:
- retval = 1;
- }
- return retval;
-}
-
-EXPORT_SYMBOL(ixj_register);
-
-static int ixj_unregister(int index)
-{
- int retval = 0;
- switch (index) {
- case G729LOADER:
- ixj_DownloadG729 = &Stub;
- break;
- case TS85LOADER:
- ixj_DownloadTS85 = &Stub;
- break;
- case PRE_READ:
- ixj_PreRead = &Stub;
- break;
- case POST_READ:
- ixj_PostRead = &Stub;
- break;
- case PRE_WRITE:
- ixj_PreWrite = &Stub;
- break;
- case POST_WRITE:
- ixj_PostWrite = &Stub;
- break;
- case PRE_IOCTL:
- ixj_PreIoctl = &Stub;
- break;
- case POST_IOCTL:
- ixj_PostIoctl = &Stub;
- break;
- default:
- retval = 1;
- }
- return retval;
-}
-
-EXPORT_SYMBOL(ixj_unregister);
-
static void ixj_init_timer(IXJ *j)
{
init_timer(&j->timer);
@@ -2257,7 +2162,7 @@
return 0;
}
-int ixj_release(struct inode *inode, struct file *file_p)
+static int ixj_release(struct inode *inode, struct file *file_p)
{
IXJ_TONE ti;
int cnt;
@@ -6785,7 +6690,7 @@
return fasync_helper(fd, file_p, mode, &j->async_queue);
}
-struct file_operations ixj_fops =
+static struct file_operations ixj_fops =
{
.owner = THIS_MODULE,
.read = ixj_enhanced_read,
@@ -7735,7 +7640,7 @@
return res;
}
-int __init ixj_probe_isapnp(int *cnt)
+static int __init ixj_probe_isapnp(int *cnt)
{
int probe = 0;
int func = 0x110;
@@ -7815,7 +7720,7 @@
return probe;
}
-int __init ixj_probe_isa(int *cnt)
+static int __init ixj_probe_isa(int *cnt)
{
int i, probe;
@@ -7839,7 +7744,7 @@
return 0;
}
-int __init ixj_probe_pci(int *cnt)
+static int __init ixj_probe_pci(int *cnt)
{
struct pci_dev *pci = NULL;
int i, probe = 0;
reply other threads:[~2004-10-30 22:38 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20041030223817.GH4374@stusta.de \
--to=bunk@stusta.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.