From: Matt Porter <mporter@kernel.crashing.org>
To: "Howard, Marc" <Marc.Howard@KLA-Tencor.com>
Cc: linuxppc-embedded@ozlabs.org
Subject: Re: Trouble booting uboot on 440GX (ocotea) eval board after initial power-up boot
Date: Thu, 11 Nov 2004 21:20:47 -0700 [thread overview]
Message-ID: <20041111212047.B5291@home.com> (raw)
In-Reply-To: <91B22F93A880FA48879475E134D6F0BE283EBD@CA1EXCLV02.adcorp.kla-tencor.com>; from Marc.Howard@KLA-Tencor.com on Thu, Nov 11, 2004 at 06:19:02PM -0800
On Thu, Nov 11, 2004 at 06:19:02PM -0800, Howard, Marc wrote:
> Hi,
>
> I've built and installed U-Boot 1.1.2 on an IBM 440GX eval board
> (ocotea). After powering the board I can get the uboot interactive
> prompt. If I type 'reset' or hit the reset button it hangs. I get the
> same results whether or not I use the BDI2000. Doing a power cycle of
> the board is the only way to get back to the prompt.
>
> Is there some reconfiguation U-Boot does that causes the processor boot
> address to change after the initial power-up? Am I missing something
> here?
You might find more help on the u-boot users list.
-Matt
prev parent reply other threads:[~2004-11-12 4:20 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-11-12 2:19 Trouble booting uboot on 440GX (ocotea) eval board after initial power-up boot Howard, Marc
2004-11-12 4:20 ` Matt Porter [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20041111212047.B5291@home.com \
--to=mporter@kernel.crashing.org \
--cc=Marc.Howard@KLA-Tencor.com \
--cc=linuxppc-embedded@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.