All of lore.kernel.org
 help / color / mirror / Atom feed
From: Adrian Bunk <bunk@stusta.de>
To: Andrew Morton <akpm@osdl.org>, tao@acc.umu.se
Cc: linux-kernel@vger.kernel.org
Subject: [2.6 patch] small MCA cleanups (fwd)
Date: Wed, 24 Nov 2004 03:04:27 +0100	[thread overview]
Message-ID: <20041124020427.GM2927@stusta.de> (raw)


The patch forwarded below still applies and compiles against 
2.6.10-rc2-mm3.

Please apply.


----- Forwarded message from Adrian Bunk <bunk@stusta.de> -----

Date:	Sun, 7 Nov 2004 13:11:12 +0100
From: Adrian Bunk <bunk@stusta.de>
To: tao@acc.umu.se
Cc: linux-kernel@vger.kernel.org
Subject: [2.6 patch] small MCA cleanups

The patch below does the following cleanups in the MCA code:
- make some needlessly global code static
- remove three unused global functions from mca-legacy.c (two of them
  were EXPORT_SYMBOL'ed); this should IMHO be safe since mca-legacy
  is not an API drivers should move to


diffstat output:
 drivers/mca/mca-bus.c      |    2 -
 drivers/mca/mca-legacy.c   |   59 -------------------------------------
 drivers/mca/mca-proc.c     |    4 +-
 include/linux/mca-legacy.h |    5 ---
 4 files changed, 3 insertions(+), 67 deletions(-)


Signed-off-by: Adrian Bunk <bunk@stusta.de>

--- linux-2.6.10-rc1-mm3-full/drivers/mca/mca-bus.c.old	2004-11-07 12:29:40.000000000 +0100
+++ linux-2.6.10-rc1-mm3-full/drivers/mca/mca-bus.c	2004-11-07 12:30:01.000000000 +0100
@@ -34,7 +34,7 @@
 /* Very few machines have more than one MCA bus.  However, there are
  * those that do (Voyager 35xx/5xxx), so we do it this way for future
  * expansion.  None that I know have more than 2 */
-struct mca_bus *mca_root_busses[MAX_MCA_BUSSES];
+static struct mca_bus *mca_root_busses[MAX_MCA_BUSSES];
 
 #define MCA_DEVINFO(i,s) { .pos = i, .name = s }
 
--- linux-2.6.10-rc1-mm3-full/include/linux/mca-legacy.h.old	2004-11-07 12:31:22.000000000 +0100
+++ linux-2.6.10-rc1-mm3-full/include/linux/mca-legacy.h	2004-11-07 12:31:44.000000000 +0100
@@ -34,10 +34,6 @@
 extern int mca_find_adapter(int id, int start);
 extern int mca_find_unused_adapter(int id, int start);
 
-/* adapter state info - returns 0 if no */
-extern int mca_isadapter(int slot);
-extern int mca_isenabled(int slot);
-
 extern int mca_is_adapter_used(int slot);
 extern int mca_mark_as_used(int slot);
 extern void mca_mark_as_unused(int slot);
@@ -50,7 +46,6 @@
  * so we can have a more interesting /proc/mca.
  */
 extern void mca_set_adapter_name(int slot, char* name);
-extern char* mca_get_adapter_name(int slot);
 
 /* These routines actually mess with the hardware POS registers.  They
  * temporarily disable the device (and interrupts), so make sure you know
--- linux-2.6.10-rc1-mm3-full/drivers/mca/mca-legacy.c.old	2004-11-07 12:30:12.000000000 +0100
+++ linux-2.6.10-rc1-mm3-full/drivers/mca/mca-legacy.c	2004-11-07 12:31:09.000000000 +0100
@@ -283,25 +283,6 @@
 EXPORT_SYMBOL(mca_set_adapter_name);
 
 /**
- *	mca_get_adapter_name - get the adapter description
- *	@slot:	slot to query
- *
- *	Return the adapter description if set. If it has not been
- *	set or the slot is out range then return NULL.
- */
-
-char *mca_get_adapter_name(int slot)
-{
-	struct mca_device *mca_dev = mca_find_device_by_slot(slot);
-
-	if(!mca_dev)
-		return NULL;
-
-	return mca_device_get_name(mca_dev);
-}
-EXPORT_SYMBOL(mca_get_adapter_name);
-
-/**
  *	mca_is_adapter_used - check if claimed by driver
  *	@slot:	slot to check
  *
@@ -365,43 +346,3 @@
 }
 EXPORT_SYMBOL(mca_mark_as_unused);
 
-/**
- *	mca_isadapter - check if the slot holds an adapter
- *	@slot:	slot to query
- *
- *	Returns zero if the slot does not hold an adapter, non zero if
- *	it does.
- */
-
-int mca_isadapter(int slot)
-{
-	struct mca_device *mca_dev = mca_find_device_by_slot(slot);
-	enum MCA_AdapterStatus status;
-
-	if(!mca_dev)
-		return 0;
-
-	status = mca_device_status(mca_dev);
-
-	return status == MCA_ADAPTER_NORMAL
-		|| status == MCA_ADAPTER_DISABLED;
-}
-EXPORT_SYMBOL(mca_isadapter);
-
-/**
- *	mca_isenabled - check if the slot holds an enabled adapter
- *	@slot:	slot to query
- *
- *	Returns a non zero value if the slot holds an enabled adapter
- *	and zero for any other case.
- */
-
-int mca_isenabled(int slot)
-{
-	struct mca_device *mca_dev = mca_find_device_by_slot(slot);
-
-	if(!mca_dev)
-		return 0;
-
-	return mca_device_status(mca_dev) == MCA_ADAPTER_NORMAL;
-}
--- linux-2.6.10-rc1-mm3-full/drivers/mca/mca-proc.c.old	2004-11-07 12:31:53.000000000 +0100
+++ linux-2.6.10-rc1-mm3-full/drivers/mca/mca-proc.c	2004-11-07 12:33:30.000000000 +0100
@@ -43,8 +43,8 @@
 	return len;
 }
 
-int get_mca_info(char *page, char **start, off_t off,
-		 int count, int *eof, void *data)
+static int get_mca_info(char *page, char **start, off_t off,
+			int count, int *eof, void *data)
 {
 	int i, len = 0;
 

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

----- End forwarded message -----


             reply	other threads:[~2004-11-24  2:10 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-11-24  2:04 Adrian Bunk [this message]
2004-11-24  7:59 ` [2.6 patch] small MCA cleanups (fwd) David Weinehall
2004-11-28 16:13   ` James Bottomley
2004-11-28 17:10     ` Alan Cox
2004-11-28 19:02       ` James Bottomley

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20041124020427.GM2927@stusta.de \
    --to=bunk@stusta.de \
    --cc=akpm@osdl.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=tao@acc.umu.se \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.