Re: Impossible to compile iasl

[Bruce Mackay <brucem128-Wuw85uim5zDR7s880joybQ@public.gmane.org>]

On Fri, 26 Nov 2004 16:07:15 +0100
"vincent.legarrec" <vincent.legarrec-39ZsbGIQGT5GWvitb5QawA@public.gmane.org> wrote:

> I've already changed flex to flex-old and install bison and bison-1.35 but
> the problem exists enough. 
> Since, I reboot the computer and no change.
> 
> May you give me another help?
> 
> Regards,
> Vincent
> 
> -----Message d'origine-----
> 
> This is the problem, which is fixed by changing flex to flex-old, I've
> already mentioned that.
> 
> Regards,
> Alex.
> 
> >-----Original Message-----
> >From: vincent.legarrec [mailto:vincent.legarrec-39ZsbGIQGT5GWvitb5QawA@public.gmane.org]
> >Sent: Friday, November 26, 2004 4:03 PM
> >To: Starikovskiy, Alexey Y
> >Subject: RE: [ACPI] Impossible to compile iasl
> >
> >Thanks a lot for all replies, one problem is solve but now I have the
> >message :
> >
> >aslcompiler.l:846: error: `yytext_ptr' undeclared (first use in this
> >function)
> >aslcompiler.l:846: error: (Each undeclared identifier is reported only once
> >aslcompiler.l:846: error: for each function it appears in.)
> >make: *** [aslcompilerlex.o] Erreur 1
> >

This happened to me too.  I fixed it as follows:

In aslcompilerlex.c  there will be a line #undef yytext_ptr.  Remove it and try make again.  It worked for me.

Bruce


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. 
http://productguide.itmanagersjournal.com/