I've got an Alpha (COMPAQ Professional Workstation XP1000) with a
built-in ISP1020. Kernel 2.4.28 runs fine on this system; 2.6.9 gives
me the following errors:

ERROR: SCSI host `isp1020' has no error handling
ERROR: This is not a safe way to run your SCSI host
ERROR: The error handling must be added to this driver
fffffc0007fafdb8 0000000000000001 fffffc00011a5ac0 fffffc000158bcd0 
       fffffc000158bcd0 fffffc0000366800 fffffc000158bcd0
	   fffffc0000366800 
       fffffc0000000000 fffffc0007fafe00 fffffc0007fafe00
	   fffffc0000366800 
       fffffc00011b0007 fffffc000158bcd0 fffffc00011b247c
	   fffffc000158bcd0 
       0000000000000000 0000000000000000 fffffc00012fca88
	   fffffc000158bcd0 
       0000000000000000 fffffc000158bdb0 fffffc00012fbf00
	   fffffc000126bf00 
Trace:
[<fffffc00011a5ac0>] scsi_register+0x20/0xa0
[<fffffc00011b0007>] sdev_show_model+0x27/0x40
[<fffffc00011b247c>] isp1020_detect+0x8c/0x300
[<fffffc0001010168>] init+0x48/0x180
[<fffffc0001013018>] kernel_thread+0x28/0x90

qlogicisp : new isp1020 revision ID (6)
qlogicisp: mbox_command loop timeout #2
qlogicisp: mbox_command loop timeout #2
qlogicisp: mbox_command loop timeout #2
qlogicisp: mbox_command loop timeout #2

Googling for this has shown a fair number of other people with similar
problems, but I've not found any mention of somebody working on
this. I'm happy to take a look myself, but I thought it might be
useful to check here first before I wade in. Anybody?

-- 
Steve McIntyre, Cambridge, UK.                                steve@einval.com
"C++ ate my sanity" -- Jon Rabone