From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from david.siemens.de (david.siemens.de [192.35.17.14]) by ozlabs.org (Postfix) with ESMTP id 997AF2BF10 for ; Fri, 17 Dec 2004 00:03:46 +1100 (EST) Content-Type: text/plain; charset="iso-8859-1" From: Gerhard Jaeger To: Nico Schottelius Date: Thu, 16 Dec 2004 13:18:37 +0100 References: <20041216103325.GA6713@schottelius.org> In-Reply-To: <20041216103325.GA6713@schottelius.org> MIME-Version: 1.0 Message-Id: <200412161318.37998.g.jaeger@sysgo.com> Cc: linuxppc-dev@ozlabs.org Subject: Re: Error compiling 40x ppc kernels (walnut) List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Hi, On Thursday 16 December 2004 11:33, Nico Schottelius wrote: >I am trying to build a 40x / Walnut Linux (only for testing), but >the compile process always breaks: > >1. walnut build with ibm emac network card enabled >2. walnut build without ibm emac network card enabled > >I am currently using > >make ARCH=3Dppc CROSS_COMPILE=3Dpowerpc-linux-uclibc- > >on my x86 machine as my ibook is currently at home. >Do you know why those errors occur and can you help me fix them? > from what I see from your config file, you have enabled a lot of stuff, I'm pretty sure which won't build correctly for the walnut. I.e. the whole framebuffer stuff is not needed - switch it off. (This is also your problem here!) I suggest to go through all of your configuration and disable all of the stuff, which you do not really need: - frame-buffer - usb - all of the crypto stuff - IPv6 =2E =2E =2E Set at least only processor, platform and serial console support on (and of course correctly) then try again. Never start with a full=20 or overloaded config set ;) Ciao, Gerhard --=20 Gerhard Jaeger g.jaeger@sysgo.com SYSGO AG Embedded and Real-Time Software www.sysgo.com | www.elinos.com | www.osek.de | www.imerva.com