From mboxrd@z Thu Jan 1 00:00:00 1970 From: Matthew Harrell Subject: Re: found unsupported CPU with Enhanced SpeedStep Date: Wed, 5 Jan 2005 13:02:32 -0500 Message-ID: <20050105180232.GA29313@bittwiddlers.com> References: <20041230014005.GA16358@bittwiddlers.com> <1104446294.24179.1.camel@localhost> <20050102120729.GB23300@dominikbrodowski.de> <20050105160622.GE19199@poupinou.org> <20050105162234.GA18703@bittwiddlers.com> <20050105172415.GH19199@poupinou.org> Mime-Version: 1.0 Return-path: Content-Disposition: inline In-Reply-To: <20050105172415.GH19199@poupinou.org> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: cpufreq-bounces@www.linux.org.uk Errors-To: cpufreq-bounces+glkc-cpufreq=gmane.org@www.linux.org.uk Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Bruno Ducrot Cc: Matthew Harrell , cpufreq list : There is four Load statements in the ssdt. I need to look what tables : are loaded at run time. : : Could you please send to me the result of the attached program : when HT mode? Well, I ran it as root both with HT turned on and off. Both times I got this CPU0IST 3ffefbe7 277 can't decode CPU0IST CPU1IST 3ffefb60 87 can't decode CPU1IST CPU0CST 3ffef988 1d8 can't decode CPU0IST CPU1CST 3ffef92c 5c can't decode CPU1IST Some other comments about HT mode. About 50% of the time when HT is turned on the bootup sequence will oops and hang somewhere. I don't know how to get the output from the oops since it never gets to a single user shell. The rest of the time it will boot up fine and work in SMP mode. The frequency scaling seems to work fine but I get a lot of these messages in my log acpi-cpufreq: Transition failed I don't seem to get those when not running with HT on. Let me know if there is a different program I can run to get those tables -- Matthew Harrell There are only 10 types of people in Bit Twiddlers, Inc. this world: those who understand mharrell@bittwiddlers.com binary and those who don't.