From: "Michael S. Zick" <mszick@wolfbutter.com>
To: parisc-linux@lists.parisc-linux.org
Subject: Re: [parisc-linux] PPPOE with BL180
Date: Mon, 10 Jan 2005 07:36:13 -0600 [thread overview]
Message-ID: <200501100736.13937.mszick@wolfbutter.com> (raw)
In-Reply-To: <BAY21-F174616CDCA2C6E4FFCB76892960@phx.gbl>
On Sun January 9 2005 17:00, Dany Joly wrote:
>
Which ethernet port is the modem connected to?
Is the modem setup as a bridge or is it also doing PPPoE?
Note:
> Nov 9 03:16:38 mammoth pppd[392]: local IP address 67.70.77.230
> Nov 9 03:16:38 mammoth pppd[392]: remote IP address 64.230.254.187
> Nov 9 03:16:38 mammoth pppd[392]: primary DNS address 206.47.244.89
> Nov 9 03:16:38 mammoth pppd[392]: secondary DNS address 206.47.244.133
>
- - - -
> mammoth:/home/dany# ifconfig
> eth0 Link encap:Ethernet HWaddr 00:60:B0:D0:45:CD
> inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
- - - -
>
> eth1 Link encap:Ethernet HWaddr 00:20:18:55:97:37
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
- - - -
>
> ppp0 Link encap:Point-to-Point Protocol
> inet addr:67.70.77.230 P-t-P:64.230.254.187 Mask:255.255.255.255
> UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1
- - - -
>
> mammoth:/tmp# route -n -F
> Kernel IP routing table
> Destination Gateway Genmask Flags Metric Ref Use
> Iface
> 64.230.254.187 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0
> 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
> 0.0.0.0 64.230.254.187 0.0.0.0 UG 0 0 0 ppp0
>
- - - -
> /usr/sbin/pppd call dsl-provider
> root 393 0.0 0.0 1548 560 ? S 03:16 0:00
> /usr/sbin/pppoe -I eth1 -T 80 -m 1452
- - - -
eth1 ?
Some modems expect the interface to have an address assigned.
Modem must be on eth1 - since PPPoE is up and running.
ppp is up and running - since it got the addresses and DNS.
Default route is to ppp0 - which is as expected.
Can you ping the nameservers?
In addition to trying a newer (fixed) ppp - check for the
modem still configured to do PPPoE.
The above outputs presume that the modem is configured
as a bridge.
(a)dsl modems usually ship with PPPoE enabled.
If you are using a modem supplied by Bell Canada, it probably
also shipped with PPPoE enabled.
(a)dsl supports multiple sessions - the far end may be only listening
to the PPPoE session setup by the modem.
Mike
_______________________________________________
parisc-linux mailing list
parisc-linux@lists.parisc-linux.org
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux
prev parent reply other threads:[~2005-01-10 13:36 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-01-09 23:00 [parisc-linux] PPPOE with BL180 Dany Joly
2005-01-10 0:12 ` Max Grabert
2005-01-10 0:18 ` James Bottomley
2005-01-10 13:36 ` Michael S. Zick [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200501100736.13937.mszick@wolfbutter.com \
--to=mszick@wolfbutter.com \
--cc=parisc-linux@lists.parisc-linux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.