All of lore.kernel.org
 help / color / mirror / Atom feed
From: domen@coderock.org
To: ralf@linux-mips.org
Cc: linux-mips@linux-mips.org, domen@coderock.org, drizzd@aon.at,
	janitor@sternwelten.at
Subject: [patch 1/1] __FUNCTION__ string concatenation deprecated
Date: Mon, 10 Jan 2005 19:32:36 +0100	[thread overview]
Message-ID: <20050110183238.486E71F1ED@trashy.coderock.org> (raw)




Description: __FUNCTION__ string concatenation is deprecated

Diff against linux-2.6 up to ChangeSet@1.1938 (04/09/18 20:30:01)

Status: untested

Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Maximilian Attems <janitor@sternwelten.at>

# sound/oss/ite8172.c
#   2004/09/20 14:52:26+02:00 drizzd@aon.at +1 -1
#   __FUNCTION__ string concatenation is deprecated
# 
# sound/oss/au1000.c
#   2004/09/20 14:52:26+02:00 drizzd@aon.at +1 -1
#   __FUNCTION__ string concatenation is deprecated
# 
# drivers/net/gt96100eth.c
#   2004/09/20 14:52:26+02:00 drizzd@aon.at +5 -5
#   __FUNCTION__ string concatenation is deprecated
# 
# arch/mips/au1000/common/usbdev.c
#   2004/09/20 14:52:26+02:00 drizzd@aon.at +2 -2
#   __FUNCTION__ string concatenation is deprecated
# 
Signed-off-by: Domen Puncer <domen@coderock.org>
---


 kj-domen/arch/mips/au1000/common/usbdev.c |    4 ++--
 kj-domen/drivers/net/gt96100eth.c         |   10 +++++-----
 kj-domen/sound/oss/au1000.c               |    2 +-
 kj-domen/sound/oss/ite8172.c              |    2 +-
 4 files changed, 9 insertions(+), 9 deletions(-)

diff -puN arch/mips/au1000/common/usbdev.c~function-string-arch-mips arch/mips/au1000/common/usbdev.c
--- kj/arch/mips/au1000/common/usbdev.c~function-string-arch-mips	2005-01-10 17:59:57.000000000 +0100
+++ kj-domen/arch/mips/au1000/common/usbdev.c	2005-01-10 17:59:57.000000000 +0100
@@ -348,7 +348,7 @@ endpoint_stall(endpoint_t * ep)
 {
 	u32 cs;
 
-	warn(__FUNCTION__);
+	warn("%s", __FUNCTION__);
 
 	cs = au_readl(ep->reg->ctrl_stat) | USBDEV_CS_STALL;
 	au_writel(cs, ep->reg->ctrl_stat);
@@ -360,7 +360,7 @@ endpoint_unstall(endpoint_t * ep)
 {
 	u32 cs;
 
-	warn(__FUNCTION__);
+	warn("%s", __FUNCTION__);
 
 	cs = au_readl(ep->reg->ctrl_stat) & ~USBDEV_CS_STALL;
 	au_writel(cs, ep->reg->ctrl_stat);
diff -puN drivers/net/gt96100eth.c~function-string-arch-mips drivers/net/gt96100eth.c
--- kj/drivers/net/gt96100eth.c~function-string-arch-mips	2005-01-10 17:59:57.000000000 +0100
+++ kj-domen/drivers/net/gt96100eth.c	2005-01-10 17:59:57.000000000 +0100
@@ -73,7 +73,7 @@ static void dump_rx_desc(int dbg_lvl, st
 static void dump_skb(int dbg_lvl, struct net_device *dev,
 		     struct sk_buff *skb);
 static void dump_hw_addr(int dbg_lvl, struct net_device *dev,
-			 const char* pfx, unsigned char* addr_str);
+			 const char* pfx, const char* func, unsigned char* addr_str);
 static void update_stats(struct gt96100_private *gp);
 static void abort(struct net_device *dev, u32 abort_bits);
 static void hard_stop(struct net_device *dev);
@@ -334,13 +334,13 @@ dump_MII(int dbg_lvl, struct net_device 
 
 static void
 dump_hw_addr(int dbg_lvl, struct net_device *dev, const char* pfx,
-	     unsigned char* addr_str)
+	     const char* func, unsigned char* addr_str)
 {
 	int i;
 	char buf[100], octet[5];
     
 	if (dbg_lvl <= GT96100_DEBUG) {
-		strcpy(buf, pfx);
+		sprintf(buf, pfx, func);
 		for (i = 0; i < 6; i++) {
 			sprintf(octet, "%2.2x%s",
 				addr_str[i], i<5 ? ":" : "\n");
@@ -708,7 +708,7 @@ static int __init gt96100_probe1(struct 
 
 	info("%s found at 0x%x, irq %d\n",
 	     chip_name(gp->chip_rev), gtif->iobase, gtif->irq);
-	dump_hw_addr(0, dev, "HW Address ", dev->dev_addr);
+	dump_hw_addr(0, dev, "%s: HW Address ", __FUNCTION__, dev->dev_addr);
 	info("%s chip revision=%d\n", chip_name(gp->chip_rev), gp->chip_rev);
 	info("%s ethernet port %d\n", chip_name(gp->chip_rev), gp->port_num);
 	info("external PHY ID1=0x%04x, ID2=0x%04x\n", phy_id1, phy_id2);
@@ -1488,7 +1488,7 @@ gt96100_set_rx_mode(struct net_device *d
 		gt96100_add_hash_entry(dev, dev->dev_addr);
 
 		for (mcptr = dev->mc_list; mcptr; mcptr = mcptr->next) {
-			dump_hw_addr(2, dev, __FUNCTION__ ": addr=",
+			dump_hw_addr(2, dev, "%s: addr=", __FUNCTION__,
 				     mcptr->dmi_addr);
 			gt96100_add_hash_entry(dev, mcptr->dmi_addr);
 		}
diff -puN sound/oss/au1000.c~function-string-arch-mips sound/oss/au1000.c
--- kj/sound/oss/au1000.c~function-string-arch-mips	2005-01-10 17:59:57.000000000 +0100
+++ kj-domen/sound/oss/au1000.c	2005-01-10 17:59:57.000000000 +0100
@@ -1317,7 +1317,7 @@ static int au1000_mmap(struct file *file
 	unsigned long   size;
 	int ret = 0;
 
-	dbg(__FUNCTION__);
+	dbg("%s", __FUNCTION__);
     
 	lock_kernel();
 	down(&s->sem);
diff -puN sound/oss/ite8172.c~function-string-arch-mips sound/oss/ite8172.c
--- kj/sound/oss/ite8172.c~function-string-arch-mips	2005-01-10 17:59:57.000000000 +0100
+++ kj-domen/sound/oss/ite8172.c	2005-01-10 17:59:57.000000000 +0100
@@ -1848,7 +1848,7 @@ static int it8172_release(struct inode *
 	struct it8172_state *s = (struct it8172_state *)file->private_data;
 
 #ifdef IT8172_VERBOSE_DEBUG
-	dbg(__FUNCTION__);
+	dbg("%s", __FUNCTION__);
 #endif
 	lock_kernel();
 	if (file->f_mode & FMODE_WRITE)
_

                 reply	other threads:[~2005-01-10 18:32 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20050110183238.486E71F1ED@trashy.coderock.org \
    --to=domen@coderock.org \
    --cc=drizzd@aon.at \
    --cc=janitor@sternwelten.at \
    --cc=linux-mips@linux-mips.org \
    --cc=ralf@linux-mips.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.