From mboxrd@z Thu Jan  1 00:00:00 1970
Date: Mon, 10 Jan 2005 20:11:33 +0100
From: Gergely Madarasz <gorgo@broadband.hu>
Message-ID: <20050110191133.GM7529@thunderchild.debian.net>
References: <20050110140638.GH7529@thunderchild.debian.net>
	<41E299D4.2010605@redhat.com>
	<20050110154506.GJ7529@thunderchild.debian.net>
	<41E2A7A7.3060109@redhat.com>
	<20050110161855.GK7529@thunderchild.debian.net>
	<41E2BE29.8090800@redhat.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <41E2BE29.8090800@redhat.com>
Subject: [Bridge] Re: tg3 bridge problems
List-Id: Linux Ethernet Bridging  <bridge.lists.osdl.org>
List-Unsubscribe: <http://lists.osdl.org/mailman/listinfo/bridge>,
	<mailto:bridge-request@lists.osdl.org?subject=unsubscribe>
List-Archive: <http://lists.osdl.org/pipermail/bridge>
List-Post: <mailto:bridge@lists.osdl.org>
List-Help: <mailto:bridge-request@lists.osdl.org?subject=help>
List-Subscribe: <http://lists.osdl.org/mailman/listinfo/bridge>,
	<mailto:bridge-request@lists.osdl.org?subject=subscribe>
To: Neil Horman <nhorman@redhat.com>
Cc: linux-net@vger.kernel.org, bridge@lists.osdl.org

On Mon, Jan 10, 2005 at 12:40:57PM -0500, Neil Horman wrote:
> Gergely Madarasz wrote:
> >On Mon, Jan 10, 2005 at 11:04:55AM -0500, Neil Horman wrote:
> >
> >>Strange.  My concern was that the tg3 interface has its hardware reset 
> >>whenever its set to be up, and part of that is a resetting of its 
> >>receive mode.  If for some reason IFF_PROMISC was cleared after you set 
> >>it using brctl, the interface might be taken out of promisc mode.  Do 
> >>you have any iptables rules running that might drop bpdus?
> >
> >
> >No iptables rules az all. Btw iptables wouldn't prevent tcpdump from
> >seeing the packets, would it?
> >Could it be that the driver perhaps has a problem setting promisc mode
> >when resetting the hardware?
> >
> Not really sure about this.  One experiment is worth a thousand guesses 
> I suppose.......  I'll try and let you know. :)

I did some other checks, like adding an explicit ifconfig eth0 promisc,
then looking at tcpdump output - I didn't see any stray packets like I
usually do, just ethernet broadcasts and unicasts to my mac, this also
points to a problem that the ethernet interface is actually not in
promisc, while the driver thinks it is.

And it is probably not a driver-only issue. I've got older machines with
tg3 running fine with bridge (with an older tg3 driver), and eth1 on the
same machine also runs fine. On another machine I tested today, an IBM
x326, the same thing happens - eth0 broken, eth1 fine. Would access to one
of these machines help? :)

Greg