From: Gerd Knorr <kraxel@bytesex.org>
To: Andrew Morton <akpm@osdl.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: [patch] v4l: tuner update
Date: Thu, 20 Jan 2005 16:26:56 +0100 [thread overview]
Message-ID: <20050120152656.GA12938@bytesex> (raw)
- add new tuner types.
- add support for digital tv tuning.
- make tda9887 output ports more configurable.
Signed-off-by: Gerd Knorr <kraxel@bytesex.org>
---
drivers/media/video/tda9887.c | 38 +++++++++++++++------
drivers/media/video/tuner.c | 60 +++++++++++++++++++---------------
include/media/tuner.h | 8 +++-
3 files changed, 69 insertions(+), 37 deletions(-)
Index: linux-2.6.10/include/media/tuner.h
===================================================================
--- linux-2.6.10.orig/include/media/tuner.h 2004-12-29 23:57:53.000000000 +0100
+++ linux-2.6.10/include/media/tuner.h 2005-01-19 14:12:25.168221195 +0100
@@ -77,6 +77,7 @@
#define TUNER_MICROTUNE_4042FI5 49 /* FusionHDTV 3 Gold - 4042 FI5 (3X 8147) */
#define TUNER_TCL_2002N 50
#define TUNER_PHILIPS_FM1256_IH3 51
+#define TUNER_THOMSON_DTT7610 52
#define NOTUNER 0
#define PAL 1 /* PAL_BG */
@@ -97,6 +98,7 @@
#define HITACHI 9
#define Panasonic 10
#define TCL 11
+#define THOMSON 12
#define TUNER_SET_TYPE _IOW('t',1,int) /* set tuner type */
#define TUNER_SET_TVFREQ _IOW('t',2,int) /* set tv freq */
@@ -108,10 +110,12 @@
#define TDA9887_SET_CONFIG _IOW('t',5,int)
/* tv card specific */
# define TDA9887_PRESENT (1<<0)
-# define TDA9887_PORT1 (1<<1)
-# define TDA9887_PORT2 (1<<2)
+# define TDA9887_PORT1_INACTIVE (1<<1)
+# define TDA9887_PORT2_INACTIVE (1<<2)
# define TDA9887_QSS (1<<3)
# define TDA9887_INTERCARRIER (1<<4)
+# define TDA9887_PORT1_ACTIVE (1<<5)
+# define TDA9887_PORT2_ACTIVE (1<<6)
/* config options */
# define TDA9887_DEEMPHASIS_MASK (3<<16)
# define TDA9887_DEEMPHASIS_NONE (1<<16)
Index: linux-2.6.10/drivers/media/video/tuner.c
===================================================================
--- linux-2.6.10.orig/drivers/media/video/tuner.c 2004-12-30 00:00:10.000000000 +0100
+++ linux-2.6.10/drivers/media/video/tuner.c 2005-01-19 14:12:25.169221007 +0100
@@ -1,5 +1,5 @@
/*
- * $Id: tuner.c,v 1.31 2004/11/10 11:07:24 kraxel Exp $
+ * $Id: tuner.c,v 1.36 2005/01/14 13:29:40 kraxel Exp $
*/
#include <linux/module.h>
@@ -62,7 +62,7 @@ struct tuner {
v4l2_std_id std;
int using_v4l2;
- unsigned int radio;
+ enum v4l2_tuner_type mode;
unsigned int input;
// only for MT2032
@@ -265,6 +265,11 @@ static struct tunertype tuners[] = {
{ "Philips PAL/SECAM_D (FM 1256 I-H3)", Philips, PAL,
16*160.00,16*442.00,0x01,0x02,0x04,0x8e,623 },
+ { "Thomson DDT 7610 ATSC/NTSC)", THOMSON, ATSC,
+ 16*157.25,16*454.00,0x39,0x3a,0x3c,0x8e,732},
+ { "Philips FQ1286", Philips, NTSC,
+ 16*160.00,16*454.00,0x41,0x42,0x04,0x8e,940}, // UHF band untested
+
};
#define TUNERS ARRAY_SIZE(tuners)
@@ -663,7 +668,8 @@ static void mt2050_set_if_freq(struct i2
int ret;
unsigned char buf[6];
- dprintk("mt2050_set_if_freq freq=%d\n",freq);
+ dprintk("mt2050_set_if_freq freq=%d if1=%d if2=%d\n",
+ freq,if1,if2);
f_lo1=freq+if1;
f_lo1=(f_lo1/1000000)*1000000;
@@ -688,9 +694,10 @@ static void mt2050_set_if_freq(struct i2
div2a=(lo2/8)-1;
div2b=lo2-(div2a+1)*8;
- dprintk("lo1 lo2 = %d %d\n", lo1, lo2);
- dprintk("num1 num2 div1a div1b div2a div2b= %x %x %x %x %x %x\n",num1,num2,div1a,div1b,div2a,div2b);
-
+ if (debug > 1) {
+ printk("lo1 lo2 = %d %d\n", lo1, lo2);
+ printk("num1 num2 div1a div1b div2a div2b= %x %x %x %x %x %x\n",num1,num2,div1a,div1b,div2a,div2b);
+ }
buf[0]=1;
buf[1]= 4*div1b + num1;
@@ -702,7 +709,7 @@ static void mt2050_set_if_freq(struct i2
buf[5]=div2a;
if(num2!=0) buf[5]=buf[5]|0x40;
- if(debug) {
+ if (debug > 1) {
int i;
printk("bufs is: ");
for(i=0;i<6;i++)
@@ -727,6 +734,10 @@ static void mt2050_set_tv_freq(struct i2
// PAL
if2 = 38900*1000;
}
+ if (V4L2_TUNER_DIGITAL_TV == t->mode) {
+ // testing for DVB ...
+ if2 = 36150*1000;
+ }
mt2050_set_if_freq(c, freq*62500, if2);
mt2050_set_antenna(c, tv_antenna);
}
@@ -1069,14 +1080,18 @@ static void set_freq(struct i2c_client *
{
struct tuner *t = i2c_get_clientdata(c);
- if (t->radio) {
+ switch (t->mode) {
+ case V4L2_TUNER_RADIO:
dprintk("tuner: radio freq set to %lu.%02lu\n",
freq/16,freq%16*100/16);
set_radio_freq(c,freq);
- } else {
+ break;
+ case V4L2_TUNER_ANALOG_TV:
+ case V4L2_TUNER_DIGITAL_TV:
dprintk("tuner: tv freq set to %lu.%02lu\n",
freq/16,freq%16*100/16);
set_tv_freq(c, freq);
+ break;
}
t->freq = freq;
}
@@ -1237,9 +1252,9 @@ tuner_command(struct i2c_client *client,
set_type(client,*iarg,client->adapter->name);
break;
case AUDC_SET_RADIO:
- if (!t->radio) {
+ if (V4L2_TUNER_RADIO != t->mode) {
set_tv_freq(client,400 * 16);
- t->radio = 1;
+ t->mode = V4L2_TUNER_RADIO;
}
break;
case AUDC_CONFIG_PINNACLE:
@@ -1271,7 +1286,7 @@ tuner_command(struct i2c_client *client,
struct video_channel *vc = arg;
CHECK_V4L2;
- t->radio = 0;
+ t->mode = V4L2_TUNER_ANALOG_TV;
if (vc->norm < ARRAY_SIZE(map))
t->std = map[vc->norm];
tuner_fixup_std(t);
@@ -1292,7 +1307,7 @@ tuner_command(struct i2c_client *client,
struct video_tuner *vt = arg;
CHECK_V4L2;
- if (t->radio)
+ if (V4L2_TUNER_RADIO == t->mode)
vt->signal = tuner_signal(client);
return 0;
}
@@ -1301,7 +1316,7 @@ tuner_command(struct i2c_client *client,
struct video_audio *va = arg;
CHECK_V4L2;
- if (t->radio)
+ if (V4L2_TUNER_RADIO == t->mode)
va->mode = (tuner_stereo(client) ? VIDEO_SOUND_STEREO : VIDEO_SOUND_MONO);
return 0;
}
@@ -1311,7 +1326,7 @@ tuner_command(struct i2c_client *client,
v4l2_std_id *id = arg;
SWITCH_V4L2;
- t->radio = 0;
+ t->mode = V4L2_TUNER_ANALOG_TV;
t->std = *id;
tuner_fixup_std(t);
if (t->freq)
@@ -1323,15 +1338,10 @@ tuner_command(struct i2c_client *client,
struct v4l2_frequency *f = arg;
SWITCH_V4L2;
- if (V4L2_TUNER_ANALOG_TV == f->type) {
- t->radio = 0;
- }
- if (V4L2_TUNER_RADIO == f->type) {
- if (!t->radio) {
- set_tv_freq(client,400*16);
- t->radio = 1;
- }
- }
+ if (V4L2_TUNER_RADIO == f->type &&
+ V4L2_TUNER_RADIO != t->mode)
+ set_tv_freq(client,400*16);
+ t->mode = f->type;
t->freq = f->frequency;
set_freq(client,t->freq);
break;
@@ -1341,7 +1351,7 @@ tuner_command(struct i2c_client *client,
struct v4l2_tuner *tuner = arg;
SWITCH_V4L2;
- if (t->radio)
+ if (V4L2_TUNER_RADIO == t->mode)
tuner->signal = tuner_signal(client);
break;
}
Index: linux-2.6.10/drivers/media/video/tda9887.c
===================================================================
--- linux-2.6.10.orig/drivers/media/video/tda9887.c 2004-12-29 23:59:46.000000000 +0100
+++ linux-2.6.10/drivers/media/video/tda9887.c 2005-01-19 14:12:25.169221007 +0100
@@ -1,4 +1,5 @@
#include <linux/module.h>
+#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/i2c.h>
#include <linux/types.h>
@@ -27,6 +28,7 @@
/* Addresses to scan */
static unsigned short normal_i2c[] = {
+ 0x84 >>1,
0x86 >>1,
0x96 >>1,
I2C_CLIENT_END,
@@ -374,8 +376,8 @@ static int tda9887_set_tvnorm(struct tda
return 0;
}
-static unsigned int port1 = 1;
-static unsigned int port2 = 1;
+static unsigned int port1 = UNSET;
+static unsigned int port2 = UNSET;
static unsigned int qss = UNSET;
static unsigned int adjust = 0x10;
module_param(port1, int, 0644);
@@ -385,10 +387,19 @@ module_param(adjust, int, 0644);
static int tda9887_set_insmod(struct tda9887 *t, char *buf)
{
- if (port1)
- buf[1] |= cOutputPort1Inactive;
- if (port2)
- buf[1] |= cOutputPort2Inactive;
+ if (UNSET != port1) {
+ if (port1)
+ buf[1] |= cOutputPort1Inactive;
+ else
+ buf[1] &= ~cOutputPort1Inactive;
+ }
+ if (UNSET != port2) {
+ if (port2)
+ buf[1] |= cOutputPort2Inactive;
+ else
+ buf[1] &= ~cOutputPort2Inactive;
+ }
+
if (UNSET != qss) {
if (qss)
buf[1] |= cQSS;
@@ -403,10 +414,15 @@ static int tda9887_set_insmod(struct tda
static int tda9887_set_config(struct tda9887 *t, char *buf)
{
- if (t->config & TDA9887_PORT1)
+ if (t->config & TDA9887_PORT1_ACTIVE)
+ buf[1] &= ~cOutputPort1Inactive;
+ if (t->config & TDA9887_PORT1_INACTIVE)
buf[1] |= cOutputPort1Inactive;
- if (t->config & TDA9887_PORT2)
+ if (t->config & TDA9887_PORT2_ACTIVE)
+ buf[1] &= ~cOutputPort2Inactive;
+ if (t->config & TDA9887_PORT2_INACTIVE)
buf[1] |= cOutputPort2Inactive;
+
if (t->config & TDA9887_QSS)
buf[1] |= cQSS;
if (t->config & TDA9887_INTERCARRIER)
@@ -437,14 +453,14 @@ static int tda9887_set_pinnacle(struct t
{
unsigned int bCarrierMode = UNSET;
- if (t->std & V4L2_STD_PAL) {
+ if (t->std & V4L2_STD_625_50) {
if ((1 == t->pinnacle_id) || (7 == t->pinnacle_id)) {
bCarrierMode = cIntercarrier;
} else {
bCarrierMode = cQSS;
}
}
- if (t->std & V4L2_STD_NTSC) {
+ if (t->std & V4L2_STD_525_60) {
if ((5 == t->pinnacle_id) || (6 == t->pinnacle_id)) {
bCarrierMode = cIntercarrier;
} else {
@@ -529,6 +545,8 @@ static int tda9887_configure(struct tda9
int rc;
memset(buf,0,sizeof(buf));
+ buf[1] |= cOutputPort1Inactive;
+ buf[1] |= cOutputPort2Inactive;
tda9887_set_tvnorm(t,buf);
if (UNSET != t->pinnacle_id) {
tda9887_set_pinnacle(t,buf);
--
#define printk(args...) fprintf(stderr, ## args)
next reply other threads:[~2005-01-20 15:42 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-01-20 15:26 Gerd Knorr [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-03-08 10:45 [patch] v4l: tuner update Gerd Knorr
2004-10-22 12:51 Gerd Knorr
2004-09-16 9:10 Gerd Knorr
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050120152656.GA12938@bytesex \
--to=kraxel@bytesex.org \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.