From: Adrian Bunk <bunk@stusta.de>
To: linux-kernel@vger.kernel.org
Subject: [RFC: 2.6 patch] unexport do_settimeofday
Date: Thu, 20 Jan 2005 19:19:03 +0100 [thread overview]
Message-ID: <20050120181903.GI3174@stusta.de> (raw)
In-Reply-To: <20050120181703.GG3174@stusta.de>
[ same patch with corrected subject ]
Is the patch below correct?
Signed-off-by: Adrian Bunk <bunk@stusta.de>
---
arch/alpha/kernel/time.c | 2 --
arch/arm/kernel/time.c | 2 --
arch/arm26/kernel/time.c | 2 --
arch/cris/kernel/time.c | 2 --
arch/h8300/kernel/time.c | 2 --
arch/i386/kernel/time.c | 2 --
arch/m32r/kernel/time.c | 2 --
arch/m68k/kernel/time.c | 2 --
arch/m68knommu/kernel/time.c | 1 -
arch/mips/dec/time.c | 2 --
arch/mips/kernel/time.c | 2 --
arch/parisc/kernel/time.c | 1 -
arch/ppc/kernel/time.c | 2 --
arch/ppc64/kernel/time.c | 2 --
arch/s390/kernel/time.c | 2 --
arch/sh/kernel/time.c | 2 --
arch/sparc/kernel/time.c | 2 --
arch/um/kernel/ksyms.c | 1 -
arch/v850/kernel/time.c | 2 --
arch/x86_64/kernel/time.c | 2 --
20 files changed, 37 deletions(-)
--- linux-2.6.11-rc1-mm2-full/arch/i386/kernel/time.c.old 2005-01-20 18:52:12.000000000 +0100
+++ linux-2.6.11-rc1-mm2-full/arch/i386/kernel/time.c 2005-01-20 18:52:27.000000000 +0100
@@ -169,8 +169,6 @@
return 0;
}
-EXPORT_SYMBOL(do_settimeofday);
-
static int set_rtc_mmss(unsigned long nowtime)
{
int retval;
--- linux-2.6.11-rc1-mm2-full/arch/arm/kernel/time.c.old 2005-01-20 18:52:46.000000000 +0100
+++ linux-2.6.11-rc1-mm2-full/arch/arm/kernel/time.c 2005-01-20 18:52:51.000000000 +0100
@@ -301,8 +301,6 @@
return 0;
}
-EXPORT_SYMBOL(do_settimeofday);
-
/**
* save_time_delta - Save the offset between system time and RTC time
* @delta: pointer to timespec to store delta
--- linux-2.6.11-rc1-mm2-full/arch/sparc/kernel/time.c.old 2005-01-20 18:52:59.000000000 +0100
+++ linux-2.6.11-rc1-mm2-full/arch/sparc/kernel/time.c 2005-01-20 18:53:03.000000000 +0100
@@ -530,8 +530,6 @@
return ret;
}
-EXPORT_SYMBOL(do_settimeofday);
-
static int sbus_do_settimeofday(struct timespec *tv)
{
time_t wtm_sec, sec = tv->tv_sec;
--- linux-2.6.11-rc1-mm2-full/arch/ppc/kernel/time.c.old 2005-01-20 18:53:11.000000000 +0100
+++ linux-2.6.11-rc1-mm2-full/arch/ppc/kernel/time.c 2005-01-20 18:53:15.000000000 +0100
@@ -285,8 +285,6 @@
return 0;
}
-EXPORT_SYMBOL(do_settimeofday);
-
/* This function is only called on the boot processor */
void __init time_init(void)
{
--- linux-2.6.11-rc1-mm2-full/arch/mips/dec/time.c.old 2005-01-20 18:53:21.000000000 +0100
+++ linux-2.6.11-rc1-mm2-full/arch/mips/dec/time.c 2005-01-20 18:53:25.000000000 +0100
@@ -189,8 +189,6 @@
CMOS_WRITE(RTC_REF_CLCK_32KHZ | (16 - LOG_2_HZ), RTC_REG_A);
}
-EXPORT_SYMBOL(do_settimeofday);
-
void __init dec_timer_setup(struct irqaction *irq)
{
setup_irq(dec_interrupt[DEC_IRQ_RTC], irq);
--- linux-2.6.11-rc1-mm2-full/arch/mips/kernel/time.c.old 2005-01-20 18:53:32.000000000 +0100
+++ linux-2.6.11-rc1-mm2-full/arch/mips/kernel/time.c 2005-01-20 18:53:36.000000000 +0100
@@ -234,8 +234,6 @@
return 0;
}
-EXPORT_SYMBOL(do_settimeofday);
-
/*
* Gettimeoffset routines. These routines returns the time duration
* since last timer interrupt in usecs.
--- linux-2.6.11-rc1-mm2-full/arch/m68knommu/kernel/time.c.old 2005-01-20 18:53:43.000000000 +0100
+++ linux-2.6.11-rc1-mm2-full/arch/m68knommu/kernel/time.c 2005-01-20 18:53:47.000000000 +0100
@@ -195,4 +195,3 @@
return (unsigned long long)jiffies * (1000000000 / HZ);
}
-EXPORT_SYMBOL(do_settimeofday);
--- linux-2.6.11-rc1-mm2-full/arch/sh/kernel/time.c.old 2005-01-20 18:53:54.000000000 +0100
+++ linux-2.6.11-rc1-mm2-full/arch/sh/kernel/time.c 2005-01-20 18:53:58.000000000 +0100
@@ -254,8 +254,6 @@
return 0;
}
-EXPORT_SYMBOL(do_settimeofday);
-
/* last time the RTC clock got updated */
static long last_rtc_update;
--- linux-2.6.11-rc1-mm2-full/arch/cris/kernel/time.c.old 2005-01-20 18:54:05.000000000 +0100
+++ linux-2.6.11-rc1-mm2-full/arch/cris/kernel/time.c 2005-01-20 18:54:11.000000000 +0100
@@ -122,8 +122,6 @@
return 0;
}
-EXPORT_SYMBOL(do_settimeofday);
-
/*
* BUG: This routine does not handle hour overflow properly; it just
--- linux-2.6.11-rc1-mm2-full/arch/arm26/kernel/time.c.old 2005-01-20 18:54:18.000000000 +0100
+++ linux-2.6.11-rc1-mm2-full/arch/arm26/kernel/time.c 2005-01-20 18:54:22.000000000 +0100
@@ -198,8 +198,6 @@
return 0;
}
-EXPORT_SYMBOL(do_settimeofday);
-
static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
do_timer(regs);
--- linux-2.6.11-rc1-mm2-full/arch/m68k/kernel/time.c.old 2005-01-20 18:54:29.000000000 +0100
+++ linux-2.6.11-rc1-mm2-full/arch/m68k/kernel/time.c 2005-01-20 18:54:32.000000000 +0100
@@ -175,8 +175,6 @@
return 0;
}
-EXPORT_SYMBOL(do_settimeofday);
-
/*
* Scheduler clock - returns current time in ns units.
*/
--- linux-2.6.11-rc1-mm2-full/arch/alpha/kernel/time.c.old 2005-01-20 18:54:44.000000000 +0100
+++ linux-2.6.11-rc1-mm2-full/arch/alpha/kernel/time.c 2005-01-20 18:54:48.000000000 +0100
@@ -512,8 +512,6 @@
return 0;
}
-EXPORT_SYMBOL(do_settimeofday);
-
/*
* In order to set the CMOS clock precisely, set_rtc_mmss has to be
--- linux-2.6.11-rc1-mm2-full/arch/ppc64/kernel/time.c.old 2005-01-20 18:54:56.000000000 +0100
+++ linux-2.6.11-rc1-mm2-full/arch/ppc64/kernel/time.c 2005-01-20 18:54:59.000000000 +0100
@@ -424,8 +424,6 @@
return 0;
}
-EXPORT_SYMBOL(do_settimeofday);
-
void __init time_init(void)
{
/* This function is only called on the boot processor */
--- linux-2.6.11-rc1-mm2-full/arch/um/kernel/ksyms.c.old 2005-01-20 18:55:07.000000000 +0100
+++ linux-2.6.11-rc1-mm2-full/arch/um/kernel/ksyms.c 2005-01-20 18:55:11.000000000 +0100
@@ -95,7 +95,6 @@
EXPORT_SYMBOL(dump_thread);
EXPORT_SYMBOL(do_gettimeofday);
-EXPORT_SYMBOL(do_settimeofday);
/* This is here because UML expands open to sys_open, not to a system
* call instruction.
--- linux-2.6.11-rc1-mm2-full/arch/parisc/kernel/time.c.old 2005-01-20 18:55:19.000000000 +0100
+++ linux-2.6.11-rc1-mm2-full/arch/parisc/kernel/time.c 2005-01-20 18:55:23.000000000 +0100
@@ -197,7 +197,6 @@
clock_was_set();
return 0;
}
-EXPORT_SYMBOL(do_settimeofday);
/*
* XXX: We can do better than this.
--- linux-2.6.11-rc1-mm2-full/arch/h8300/kernel/time.c.old 2005-01-20 18:55:33.000000000 +0100
+++ linux-2.6.11-rc1-mm2-full/arch/h8300/kernel/time.c 2005-01-20 18:55:37.000000000 +0100
@@ -125,8 +125,6 @@
return 0;
}
-EXPORT_SYMBOL(do_settimeofday);
-
unsigned long long sched_clock(void)
{
return (unsigned long long)jiffies * (1000000000 / HZ);
--- linux-2.6.11-rc1-mm2-full/arch/m32r/kernel/time.c.old 2005-01-20 18:55:46.000000000 +0100
+++ linux-2.6.11-rc1-mm2-full/arch/m32r/kernel/time.c 2005-01-20 18:55:50.000000000 +0100
@@ -181,8 +181,6 @@
return 0;
}
-EXPORT_SYMBOL(do_settimeofday);
-
/*
* In order to set the CMOS clock precisely, set_rtc_mmss has to be
* called 500 ms after the second nowtime has started, because when
--- linux-2.6.11-rc1-mm2-full/arch/x86_64/kernel/time.c.old 2005-01-20 18:55:59.000000000 +0100
+++ linux-2.6.11-rc1-mm2-full/arch/x86_64/kernel/time.c 2005-01-20 18:56:02.000000000 +0100
@@ -179,8 +179,6 @@
return 0;
}
-EXPORT_SYMBOL(do_settimeofday);
-
unsigned long profile_pc(struct pt_regs *regs)
{
unsigned long pc = instruction_pointer(regs);
--- linux-2.6.11-rc1-mm2-full/arch/s390/kernel/time.c.old 2005-01-20 18:56:11.000000000 +0100
+++ linux-2.6.11-rc1-mm2-full/arch/s390/kernel/time.c 2005-01-20 18:56:15.000000000 +0100
@@ -148,8 +148,6 @@
return 0;
}
-EXPORT_SYMBOL(do_settimeofday);
-
#ifdef CONFIG_PROFILING
#define s390_do_profile(regs) profile_tick(CPU_PROFILING, regs)
--- linux-2.6.11-rc1-mm2-full/arch/v850/kernel/time.c.old 2005-01-20 18:56:22.000000000 +0100
+++ linux-2.6.11-rc1-mm2-full/arch/v850/kernel/time.c 2005-01-20 18:56:26.000000000 +0100
@@ -179,8 +179,6 @@
return 0;
}
-EXPORT_SYMBOL(do_settimeofday);
-
static int timer_dev_id;
static struct irqaction timer_irqaction = {
timer_interrupt,
prev parent reply other threads:[~2005-01-20 18:29 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-01-20 18:17 [RFC: 2.6 patch] i386: unexport do_settimeofday Adrian Bunk
2005-01-20 18:19 ` Adrian Bunk [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050120181903.GI3174@stusta.de \
--to=bunk@stusta.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.