All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
To: David Sims <dpsims@virtualdave.com>
Cc: linux-kernel@vger.kernel.org
Subject: Re: sata_vsc problem.... Please help me.
Date: Mon, 24 Jan 2005 17:09:34 -0200	[thread overview]
Message-ID: <20050124190934.GA15501@logos.cnet> (raw)
In-Reply-To: <Pine.LNX.4.21.0501241600520.817-100000@ernie.virtualdave.com>

On Mon, Jan 24, 2005 at 04:09:08PM -0600, David Sims wrote:
> Hi,
> 
>   With kernel 2.6.10 on Intel (Dell Powervault 745N).... When I insert the
> sata_vsc module via 'modprobe sata_vsc' from the command line, the module
> immediately recognizes the controller card and then enumerates the
> attached disks. During this process I am getting errors logged in syslog
> for each disk as follows:
> 
> Jan 24 13:55:37 linux kernel: irq 3: nobody cared!
> Jan 24 13:55:37 linux kernel:  [<c0128972>] __report_bad_irq+0x22/0x90
> Jan 24 13:55:37 linux kernel:  [<c0128a68>] note_interrupt+0x58/0x90
> Jan 24 13:55:37 linux kernel:  [<c01285f8>] __do_IRQ+0xd8/0xe0
> Jan 24 13:55:37 linux kernel:  [<c0103a7a>] do_IRQ+0x1a/0x30
> Jan 24 13:55:37 linux kernel:  [<c010254a>] common_interrupt+0x1a/0x20
> Jan 24 13:55:37 linux kernel:  [<c0114fc0>] __do_softirq+0x30/0x90
> Jan 24 13:55:37 linux kernel:  [<c0115055>] do_softirq+0x35/0x40
> Jan 24 13:55:37 linux kernel:  [<c0103a7f>] do_IRQ+0x1f/0x30
> Jan 24 13:55:37 linux kernel:  [<c010254a>] common_interrupt+0x1a/0x20
> Jan 24 13:55:37 linux kernel:  [<c0100590>] default_idle+0x0/0x40
> Jan 24 13:55:37 linux kernel:  [<c01005b4>] default_idle+0x24/0x40
> Jan 24 13:55:37 linux kernel:  [<c010063e>] cpu_idle+0x2e/0x40
> Jan 24 13:55:37 linux kernel:  [<c03d277b>] start_kernel+0x15b/0x190
> Jan 24 13:55:37 linux kernel: handlers:
> Jan 24 13:55:37 linux kernel: [<c02471e0>] (ide_intr+0x0/0x120)
> Jan 24 13:55:37 linux kernel: [<c02471e0>] (ide_intr+0x0/0x120)
> Jan 24 13:55:37 linux kernel: [<e08ef250>] (vsc_sata_interrupt+0x0/0xa0
> [sata_vsc])
> Jan 24 13:55:37 linux kernel: Disabling IRQ #3
> 
> and in /proc/interrupts the count for irq3 advances by 500,000 (i.e.,
> 100,000 for the controller and 100,000 for each attached disk).....
> 
> 
>   It seems to me that this driver is initializing itself and enabling
> interrupts before it is fully loaded and ready to deal with them.... 
> 
>   If I insert the module during the boot up process, the machine just
> hangs trying to read/identify the first disk... 
> 
>   Is there a way to disable or ignore these interrupts until the driver is
> fully loaded, the disks are identified and all of the necessary
> housekeeping is finished and the driver is finished loading?? 
>
>   Once the sata_vsc module finishes identifying the attached drives and
> the 'modprobe sata_vsc' returns to the command prompt the errors stop
> coming and it seems to work just fine.... You can fdisk and format the
> disks and all is well... If I could just get it load at boot time I would
> be happy....
> 
>   Any advice would be welcome at this point. ;)


You can use the following to disable the interrupt debugging: 

Documentation/kernel-parameters.txt:

        noirqdebug      [IA-32] Disables the code which attempts to detect and
                        disable unhandled interrupt sources.

But there is definately something wrong with the driver. Jeff?






  reply	other threads:[~2005-01-25  0:26 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-01-24 22:09 sata_vsc problem.... Please help me David Sims
2005-01-24 19:09 ` Marcelo Tosatti [this message]
2005-01-24 23:00   ` David Sims

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20050124190934.GA15501@logos.cnet \
    --to=marcelo.tosatti@cyclades.com \
    --cc=dpsims@virtualdave.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.