[Bluez-users] Problem Connecting to Logitech HS01-V14

["Jürgen Schindele" <jschindele@arcor.de>]

Hello guys

I try in vain to connect btsco to this new nice headset.
It work only once and till the first try it don't work any more

Here the details :

hciconfig -a
hci0:   Type: USB
        BD Address: 00:0C:76:48:06:D8 ACL MTU: 192:8  SCO MTU: 64:8
        UP RUNNING PSCAN ISCAN AUTH ENCRYPT
        RX bytes:7762 acl:0 sco:0 events:325 errors:0
        TX bytes:2930 acl:0 sco:0 commands:188 errors:0
        Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
        Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
        Link policy: RSWITCH HOLD SNIFF PARK
        Link mode: SLAVE ACCEPT
        Name: 'BlueZ (0)'
        Class: 0x7e0100
        Service Classes: Networking, Rendering, Capturing
        Device Class: Computer, Uncategorized
        HCI Ver: 1.1 (0x1) HCI Rev: 0x20d LMP Ver: 1.1 (0x1) LMP Subver: 0x=
20d
        Manufacturer: Cambridge Silicon Radio (10)

After discovering i tried manually to do :
=2D-------------------
hcitool name 00:0D:44:02:E5:B7
Logitech HS01-V14

hcitool cc 00:0D:44:02:E5:B7
Can't create connection: Input/output error

And here the coresponding hcidump -x is :
=2D----------------
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
  B7 E5 02 44 0D 00 02 00 00 00
> HCI Event: Command Status (0x0f) plen 4
  00 01 19 04
> HCI Event: Remote Name Req Complete (0x07) plen 255
  00 B7 E5 02 44 0D 00 4C 6F 67 69 74 65 63 68 20 48 53 30 31
  2D 56 31 34 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
< HCI Command: Create Connection (0x01|0x0005) plen 13
  B7 E5 02 44 0D 00 18 CC 02 00 00 00 01
> HCI Event: Command Status (0x0f) plen 4
  00 01 05 04
> HCI Event: Link Key Request (0x17) plen 6
  B7 E5 02 44 0D 00
< HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
  B7 E5 02 44 0D 00 E4 AC 30 9D 93 2A D5 64 09 2E 0E 2B 4A B1
  85 9A
> HCI Event: Command Complete (0x0e) plen 10
  01 0B 04 00 B7 E5 02 44 0D 00
> HCI Event: Connect Complete (0x03) plen 11
  05 29 00 B7 E5 02 44 0D 00 01 00

Why i'am not even asked for the pin ??
(using "/bin/bluepincat")
What is goning wrong ??

By the way under "windoof" it works ok with pairing and so on.=20

Any help is very welcome
=2D-=20
Gru=DF J=FCrgen


-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users