All of lore.kernel.org
 help / color / mirror / Atom feed
From: Adrian Bunk <bunk@stusta.de>
To: mike.miller@hp.com
Cc: iss_storagedev@hp.com, linux-kernel@vger.kernel.org
Subject: [2.6 patch] drivers/block/cciss*: misc cleanups
Date: Sat, 29 Jan 2005 14:38:25 +0100	[thread overview]
Message-ID: <20050129133825.GY28047@stusta.de> (raw)

This patch contains the following cleanups:
- make some needlesly global code static
- cciss_scsi.c: remove the unused global function cciss_scsi_info
- cciss.c:
  - init_cciss_module -> cciss_init
  - cleanup_cciss_module -> cciss_cleanup

Signed-off-by: Adrian Bunk <bunk@stusta.de>

---

 drivers/block/cciss.c      |   15 +++++----------
 drivers/block/cciss_scsi.c |   35 ++++-------------------------------
 drivers/block/cciss_scsi.h |    1 -
 3 files changed, 9 insertions(+), 42 deletions(-)

--- linux-2.6.11-rc2-mm1-full/drivers/block/cciss_scsi.h.old	2005-01-29 13:50:28.000000000 +0100
+++ linux-2.6.11-rc2-mm1-full/drivers/block/cciss_scsi.h	2005-01-29 13:51:05.000000000 +0100
@@ -39,7 +39,6 @@
 #define SCSI_CCISS_CAN_QUEUE 2
 
 /* 
-	info:           	cciss_scsi_info,		\
 
 Note, cmd_per_lun could give us some trouble, so I'm setting it very low.
 Likewise, SCSI_CCISS_CAN_QUEUE is set very conservatively.
--- linux-2.6.11-rc2-mm1-full/drivers/block/cciss_scsi.c.old	2005-01-29 13:50:40.000000000 +0100
+++ linux-2.6.11-rc2-mm1-full/drivers/block/cciss_scsi.c	2005-01-29 13:51:05.000000000 +0100
@@ -53,9 +53,7 @@
 	int cmd_type);
 
 
-const char *cciss_scsi_info(struct Scsi_Host *sa);
-
-int cciss_scsi_proc_info(
+static int cciss_scsi_proc_info(
 		struct Scsi_Host *sh,
 		char *buffer, /* data buffer */
 		char **start, 	   /* where data in buffer starts */
@@ -63,7 +61,7 @@
 		int length, 	   /* length of data in buffer */
 		int func);	   /* 0 == read, 1 == write */
 
-int cciss_scsi_queue_command (struct scsi_cmnd *cmd, 
+static int cciss_scsi_queue_command (struct scsi_cmnd *cmd, 
 		void (* done)(struct scsi_cmnd *));
 
 static struct cciss_scsi_hba_t ccissscsi[MAX_CTLR] = {
@@ -712,8 +710,6 @@
 	return 1;
 }
 
-static void __exit cleanup_cciss_module(void);
-
 static void
 cciss_unmap_one(struct pci_dev *pdev,
 		CommandList_struct *cp,
@@ -1114,7 +1110,7 @@
 }
 
 
-int
+static int
 cciss_scsi_proc_info(struct Scsi_Host *sh,
 		char *buffer, /* data buffer */
 		char **start, 	   /* where data in buffer starts */
@@ -1149,29 +1145,6 @@
 			buffer, length);	
 } 
 
-/* this is via the generic proc support */
-const char *
-cciss_scsi_info(struct Scsi_Host *sa)
-{
-	static char buf[300];
-	ctlr_info_t *ci;
-
-	/* probably need to work on putting a bit more info in here... */
-	/* this is output via the /proc filesystem. */
-
-	ci = (ctlr_info_t *) sa->hostdata[0];
-
-	sprintf(buf, "%s %c%c%c%c\n",
-		ci->product_name, 
-		ci->firm_ver[0],
-		ci->firm_ver[1],
-		ci->firm_ver[2],
-		ci->firm_ver[3]);
-
-	return buf; 
-}
-
-
 /* cciss_scatter_gather takes a struct scsi_cmnd, (cmd), and does the pci 
    dma mapping  and fills in the scatter gather entries of the 
    cciss command, cp. */
@@ -1225,7 +1198,7 @@
 }
 
 
-int 
+static int 
 cciss_scsi_queue_command (struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *))
 {
 	ctlr_info_t **c;
--- linux-2.6.11-rc2-mm1-full/drivers/block/cciss.c.old	2005-01-29 13:50:55.000000000 +0100
+++ linux-2.6.11-rc2-mm1-full/drivers/block/cciss.c	2005-01-29 14:25:31.000000000 +0100
@@ -61,7 +61,7 @@
 #include <linux/cciss_ioctl.h>
 
 /* define the PCI info for the cards we can control */
-const struct pci_device_id cciss_pci_device_id[] = {
+static const struct pci_device_id cciss_pci_device_id[] = {
 	{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISS,
 			0x0E11, 0x4070, 0, 0, 0},
 	{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSB,
@@ -2878,7 +2878,7 @@
  *  This is it.  Register the PCI driver information for the cards we control
  *  the OS will call our registered routines when it finds one of our cards. 
  */
-int __init cciss_init(void)
+static int __init cciss_init(void)
 {
 	printk(KERN_INFO DRIVER_NAME "\n");
 
@@ -2886,12 +2886,7 @@
 	return pci_module_init(&cciss_pci_driver);
 }
 
-static int __init init_cciss_module(void)
-{
-	return ( cciss_init());
-}
-
-static void __exit cleanup_cciss_module(void)
+static void __exit cciss_cleanup(void)
 {
 	int i;
 
@@ -2909,5 +2904,5 @@
 	remove_proc_entry("cciss", proc_root_driver);
 }
 
-module_init(init_cciss_module);
-module_exit(cleanup_cciss_module);
+module_init(cciss_init);
+module_exit(cciss_cleanup);


             reply	other threads:[~2005-01-29 13:44 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-01-29 13:38 Adrian Bunk [this message]
  -- strict thread matches above, loose matches on Subject: below --
2005-02-16  9:59 [2.6 patch] drivers/block/cciss*: misc cleanups Adrian Bunk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20050129133825.GY28047@stusta.de \
    --to=bunk@stusta.de \
    --cc=iss_storagedev@hp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mike.miller@hp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.