Re: configure firewall & NAT & cache with each other (nfcan: addressed to exclusive sender for this address)

[Jim Laurino <nfcan.x.jimlaur@dfgh.net>]

On 2005.01.29 23:15, Alireza Yazdani - yazdani1193@yahoo.com wrote:
> 
> Hello all,
> 
> I have 2 box for cache, bandwidth manager, firewall, NAT .
> 
> one box is cache server(squid) only. and another box is bandwidth manager,
> firewall, NAT server.
> 
> I haven't any rule on my squid box. the default gateway of my users is my
> firewall box. my firewall box has 2 ethernet(user side and internet side).
> 
> ip of firewall box is :
> 
> iptables_box_ILAN=172.16.5.5 (user side)(eth0)
> 
> iptables_box_WLAN=212.213.38.100 (internet side)(eth1)
> 
> ip of cache box is :
> 
> squid_box=172.16.5.6
> 
> the default gateway of cache box is firewall box
> 
> I use of this rule for NAT :
> 
> iptables -t nat -A POSTROUTING -s 172.16.5.0/24 -o eth1 -j SNAT --to
> 212.213.38.100
> 
> now I want redirect the request on port 80 to cache box :
> 
> local_network=172.16.5.0/24
> 
> iptables_box_ILAN=172.16.5.5
> 
> iptables_box_WLAN=212.213.38.100
> 
> iptables -t nat -A PREROUTING -i eth0 -s ! $squid_box -p tcp --dport 80 -j
> DNAT --to $squid_box:3128
> 
> iptables -t nat -A POSTROUTING -s $local_network -d $squid_box -o eth0 -j
> SNAT --to $iptables_box_ILAN

I think you do not need to do SNAT here for the local hosts.
The DNAT rule, above, should be enough.
This is not a rule to SNAT the squid box to the internet,
which you probably do want to do.

Recall that you do not say exactly what is not working,
so I can not be sure how to diagnose the problem.

One advice I can give is that the most powerful tool
for firewall trouble-shooting is
the built-in rule-match counters.

To review the counts, use something like:

	iptables -L -nvx >> file-for-review
or
	iptables -t nat -L -nvx >> file-for-review

The counts show you which rules are matching,
and allow you to trace the source of the problem.

> 
> iptables -A FORWARD -s $local_network -d $squid_box -i eth0 -o eth0 -p tcp
> --dport 3128 -j ACCEPT
> 
> when I don't use of NAT it is correct. and when I set all on one ethernet it
> is correct.
> 
> but when I have two ethernet and I NAT on firewall box it's not work  
> correct.
> 
> Please help me.
> 
> Thanks.

-- 
Jim Laurino
nfcan.x.jimlaur@dfgh.net
Please reply to the list.
Only mail from the listserver reaches this address.