From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-Id: <200501301948.ALU26389@ms12.netsolmail.com> From: Chris Taylor Subject: Re: [Bluez-users] D-Link DWB-120M and BlueZ 2.14 To: bluez-users@lists.sourceforge.net MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Sun, 30 Jan 2005 11:48:29 -0800 > >> Hmm, when I did a 'configure' in bluez-utils-2.14, I used the "-- enable- >> bcm203x" option before I did a "make install". Where does the utility get >> installed? > >it will be installed into /etc/hotplug/usb/ and you need a working and >up-to-date hotplug to make this working. When I did a 'make install', it completed with no errors but I don't see anything installed in /etc/hotplug/usb at all. How do I check if the install failed? ------------------------------------------------------- This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users