From: Olaf Hering <olh@suse.de>
To: linux-scsi@vger.kernel.org
Subject: 2.6.11rc2 prints disksize twice
Date: Mon, 31 Jan 2005 13:15:37 +0100 [thread overview]
Message-ID: <20050131121537.GA32111@suse.de> (raw)
I think its not a functional problem,
but parts of the disk detection is printed twice.
...
SCSI device sdc: 71096640 512-byte hdwr sectors (36401 MB)
SCSI device sdc: drive cache: write through
SCSI device sdc: 71096640 512-byte hdwr sectors (36401 MB)
SCSI device sdc: drive cache: write through
...
Loading sym0: <1010-66> rev 0x1 at pci 0000:41:01.0 irq 103
kernel/drivers/ssym0: No NVRAM, ID 7, Fast-80, LVD, parity checking
csi/scsi_mod.ko
Loading kernel/drivers/scsi/sdsym0: SCSI BUS has been reset.
_mod.ko
Loadingscsi0 : sym-2.1.18n
kernel/drivers/scsi/sr_mod.ko
Loading kernel/drivers/scsi/scsi_transport_spi.ko
Loading kernel/drivers/scsi/sym53c8xx_2/sym53c8xx.ko
sym0:8: FAST-40 WIDE SCSI 80.0 MB/s ST (25.0 ns, offset 31)
Vendor: IBM Model: IC35L036UCDY10-0 Rev: S28C
Type: Direct-Access ANSI SCSI revision: 03
sym0:8:0: tagged command queuing enabled, command queue depth 16.
target0:0:8: Beginning Domain Validation
sym0:8: asynchronous.
sym0:8: wide asynchronous.
sym0:8: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
target0:0:8: Ending Domain Validation
SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB)
SCSI device sda: drive cache: write through
SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB)
SCSI device sda: drive cache: write through
sda: sda2 sda3 sda4
Attached scsi disk sda at scsi0, channel 0, id 8, lun 0
sym0:9: FAST-40 WIDE SCSI 80.0 MB/s ST (25.0 ns, offset 31)
Vendor: IBM Model: IC35L036UCDY10-0 Rev: S28C
Type: Direct-Access ANSI SCSI revision: 03
sym0:9:0: tagged command queuing enabled, command queue depth 16.
target0:0:9: Beginning Domain Validation
sym0:9: asynchronous.
sym0:9: wide asynchronous.
sym0:9: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
target0:0:9: Ending Domain Validation
SCSI device sdb: 71096640 512-byte hdwr sectors (36401 MB)
SCSI device sdb: drive cache: write through
SCSI device sdb: 71096640 512-byte hdwr sectors (36401 MB)
SCSI device sdb: drive cache: write through
sdb: sdb1 sdb2 sdb3
Attached scsi disk sdb at scsi0, channel 0, id 9, lun 0
sym0:10: FAST-40 WIDE SCSI 80.0 MB/s ST (25.0 ns, offset 31)
Vendor: IBM Model: IC35L036UCDY10-0 Rev: S28C
Type: Direct-Access ANSI SCSI revision: 03
sym0:10:0: tagged command queuing enabled, command queue depth 16.
target0:0:10: Beginning Domain Validation
sym0:10: asynchronous.
sym0:10: wide asynchronous.
sym0:10: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
target0:0:10: Ending Domain Validation
SCSI device sdc: 71096640 512-byte hdwr sectors (36401 MB)
SCSI device sdc: drive cache: write through
SCSI device sdc: 71096640 512-byte hdwr sectors (36401 MB)
SCSI device sdc: drive cache: write through
sdc: sdc1 sdc2 sdc3
Attached scsi disk sdc at scsi0, channel 0, id 10, lun 0
Vendor: IBM Model: HSBPD4E PU3SCSI Rev: 0016
Type: Enclosure ANSI SCSI revision: 02
target0:0:15: Beginning Domain Validation
target0:0:15: Ending Domain Validation
sym1: <1010-66> rev 0x1 at pci 0000:41:01.1 irq 104
sym1: No NVRAM, ID 7, Fast-80, LVD, parity checking
sym1: SCSI BUS has been reset.
scsi1 : sym-2.1.18n
next reply other threads:[~2005-01-31 12:15 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-01-31 12:15 Olaf Hering [this message]
2005-01-31 17:05 ` 2.6.11rc2 prints disksize twice Patrick Mansfield
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050131121537.GA32111@suse.de \
--to=olh@suse.de \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.