From: Adrian Bunk <bunk@stusta.de>
To: "David S. Miller" <davem@davemloft.net>
Cc: akpm@osdl.org, ralf@linux-mips.org, davem@redhat.com,
jgarzik@pobox.com, linux-net@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [2.6 patch] remove dp83840.h
Date: Tue, 1 Feb 2005 01:29:32 +0100 [thread overview]
Message-ID: <20050201002932.GC8722@stusta.de> (raw)
In-Reply-To: <20050131154607.70786f2c.davem@davemloft.net>
On Mon, Jan 31, 2005 at 03:46:07PM -0800, David S. Miller wrote:
> On Tue, 1 Feb 2005 00:41:58 +0100
> Adrian Bunk <bunk@stusta.de> wrote:
>
> > dp83840.h is included once but none of the definitions it contains is
> > actually used.
> >
> > Ralf Baechle wants that it stays as documentation, so this patch moves
> > it under Documentation/ .
>
> No, let's kill this thing altogether. The only driver in the world
> using the CSCONFIG_* defines in there is the sunhme driver and it
> defines it's own macros in drivers/net/sunhme.h This header is more
> than useless these days.
>
> The header still exists in older trees and the revision history.
> So people can still get to it there.
OK, patch below
cu
Adrian
<-- snip -->
dp83840.h is included once but none of the definitions it contains is
actually used.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
---
drivers/net/ioc3-eth.c | 1
include/linux/dp83840.h | 41 ---------------------------
2 files changed, 42 deletions(-)
--- linux-2.6.10-rc2-mm3-full/drivers/net/ioc3-eth.c.old 2004-11-29 12:14:25.000000000 +0100
+++ linux-2.6.10-rc2-mm3-full/drivers/net/ioc3-eth.c 2004-11-29 12:14:34.000000000 +0100
@@ -56,7 +56,6 @@
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
#include <linux/skbuff.h>
-#include <linux/dp83840.h>
#include <net/ip.h>
#include <asm/byteorder.h>
--- linux-2.6.10-rc2-mm3-full/include/linux/dp83840.h 2004-10-18 23:54:32.000000000 +0200
+++ /dev/null 2004-11-25 03:16:25.000000000 +0100
@@ -1,41 +0,0 @@
-/*
- * linux/dp83840.h: definitions for DP83840 MII-compatible transceivers
- *
- * Copyright (C) 1996, 1999 David S. Miller (davem@redhat.com)
- */
-#ifndef __LINUX_DP83840_H
-#define __LINUX_DP83840_H
-
-#include <linux/mii.h>
-
-/*
- * Data sheets and programming docs for the DP83840 are available at
- * from http://www.national.com/
- *
- * The DP83840 is capable of both 10 and 100Mbps ethernet, in both
- * half and full duplex mode. It also supports auto negotiation.
- *
- * But.... THIS THING IS A PAIN IN THE ASS TO PROGRAM!
- * Debugging eeprom burnt code is more fun than programming this chip!
- */
-
-/* First, the MII register numbers (actually DP83840 register numbers). */
-#define MII_CSCONFIG 0x17 /* CS configuration */
-
-/* The Carrier Sense config register. */
-#define CSCONFIG_RESV1 0x0001 /* Unused... */
-#define CSCONFIG_LED4 0x0002 /* Pin for full-dplx LED4 */
-#define CSCONFIG_LED1 0x0004 /* Pin for conn-status LED1 */
-#define CSCONFIG_RESV2 0x0008 /* Unused... */
-#define CSCONFIG_TCVDISAB 0x0010 /* Turns off the transceiver */
-#define CSCONFIG_DFBYPASS 0x0020 /* Bypass disconnect function */
-#define CSCONFIG_GLFORCE 0x0040 /* Good link force for 100mbps */
-#define CSCONFIG_CLKTRISTATE 0x0080 /* Tristate 25m clock */
-#define CSCONFIG_RESV3 0x0700 /* Unused... */
-#define CSCONFIG_ENCODE 0x0800 /* 1=MLT-3, 0=binary */
-#define CSCONFIG_RENABLE 0x1000 /* Repeater mode enable */
-#define CSCONFIG_TCDISABLE 0x2000 /* Disable timeout counter */
-#define CSCONFIG_RESV4 0x4000 /* Unused... */
-#define CSCONFIG_NDISABLE 0x8000 /* Disable NRZI */
-
-#endif /* __LINUX_DP83840_H */
next prev parent reply other threads:[~2005-02-01 0:35 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-01-31 23:41 [2.6 patch] move dp83840.h to Documentation/ Adrian Bunk
2005-01-31 23:46 ` David S. Miller
2005-01-31 23:57 ` Jeff Garzik
2005-02-01 0:29 ` Adrian Bunk [this message]
2005-02-02 5:34 ` [2.6 patch] remove dp83840.h Jeff Garzik
2005-02-01 0:02 ` [2.6 patch] move dp83840.h to Documentation/ Ralf Baechle
-- strict thread matches above, loose matches on Subject: below --
2004-11-29 11:19 [2.6 patch] remove dp83840.h Adrian Bunk
2004-11-29 11:36 ` Ralf Baechle
2004-11-29 15:34 ` Adrian Bunk
2004-12-02 11:26 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050201002932.GC8722@stusta.de \
--to=bunk@stusta.de \
--cc=akpm@osdl.org \
--cc=davem@davemloft.net \
--cc=davem@redhat.com \
--cc=jgarzik@pobox.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-net@vger.kernel.org \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.