All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ulrich Hecht <uli@suse.de>
To: qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] *-user fixes
Date: Wed, 2 Mar 2005 14:27:12 +0100	[thread overview]
Message-ID: <200503021427.13142.uli@suse.de> (raw)
In-Reply-To: <200502231250.22518.uli@suse.de>

[-- Attachment #1: Type: text/plain, Size: 686 bytes --]

Hi!

On Wednesday 23 February 2005 12:50, Ulrich Hecht wrote:
> qemu-sigfpe.patch:
> send SIGFPE in case of ARM FPA exceptions. No idea if this is 100%
> correct, but it's good enough to convince the glibc test suite.

Not the python test suite, though. Here's a better fix that, as an added 
bonus, may actually be correct.

> qemu-syscalls.patch:
> some trivial syscall implementations; I only needed (and tested)
> madvise, but while I was there I noticed a number of other syscalls
> that can be implemented without much effort.
>
> qemu-jobsignals.patch:
> proper SIGTSTP/SIGCONT default handling; makes suspending/resuming my
> editor work.

So what about those, Fabrice?

CU
Uli

[-- Attachment #2: qemu-arm-sigfpe.patch --]
[-- Type: text/x-diff, Size: 3496 bytes --]

Index: linux-user/main.c
===================================================================
RCS file: /cvsroot/qemu/qemu/linux-user/main.c,v
retrieving revision 1.61
diff -u -r1.61 main.c
--- linux-user/main.c	19 Feb 2005 17:25:31 -0000	1.61
+++ linux-user/main.c	2 Mar 2005 12:37:49 -0000
@@ -325,18 +325,45 @@
             {
                 TaskState *ts = env->opaque;
                 uint32_t opcode;
+                int rc;
 
                 /* we handle the FPU emulation here, as Linux */
                 /* we get the opcode */
                 opcode = ldl_raw((uint8_t *)env->regs[15]);
                 
-                if (EmulateAll(opcode, &ts->fpa, env->regs) == 0) {
+                if ((rc=EmulateAll(opcode, &ts->fpa, env->regs)) == 0) { /* illegal instruction */
                     info.si_signo = SIGILL;
                     info.si_errno = 0;
                     info.si_code = TARGET_ILL_ILLOPN;
                     info._sifields._sigfault._addr = env->regs[15];
                     queue_signal(info.si_signo, &info);
-                } else {
+                } else if (rc < 0) { /* FP exception */
+                    FPSR fpsr = ts->fpa.fpsr;
+                    //printf("fpsr 0x%x, -rc 0x%x\n",fpsr,-rc);
+                    if(fpsr & (-rc << 16))	/* exception enabled? */
+                    {
+                      info.si_signo = SIGFPE;
+                      info.si_errno = 0;
+                      /* ordered by priority, least first */
+                      if(-rc & BIT_IXC) info.si_code = TARGET_FPE_FLTRES;
+                      if(-rc & BIT_UFC) info.si_code = TARGET_FPE_FLTUND;
+                      if(-rc & BIT_OFC) info.si_code = TARGET_FPE_FLTOVF;
+                      if(-rc & BIT_DZC) info.si_code = TARGET_FPE_FLTDIV;
+                      if(-rc & BIT_IOC) info.si_code = TARGET_FPE_FLTINV;
+                      info._sifields._sigfault._addr = env->regs[15];
+                      queue_signal(info.si_signo, &info);
+                    }
+                    else
+                      env->regs[15] += 4;
+                    
+                    /* accumulate unenabled exceptions */
+                    if((!(fpsr & BIT_IXE)) && (-rc & BIT_IXC)) fpsr |= BIT_IXC;
+                    if((!(fpsr & BIT_UFE)) && (-rc & BIT_UFC)) fpsr |= BIT_UFC;
+                    if((!(fpsr & BIT_OFE)) && (-rc & BIT_OFC)) fpsr |= BIT_OFC;
+                    if((!(fpsr & BIT_DZE)) && (-rc & BIT_DZC)) fpsr |= BIT_DZC;
+                    if((!(fpsr & BIT_IOE)) && (-rc & BIT_IOC)) fpsr |= BIT_IOC;
+                    ts->fpa.fpsr=fpsr;
+                } else { /* everything OK */
                     /* increment PC */
                     env->regs[15] += 4;
                 }
Index: target-arm/nwfpe/fpa11.c
===================================================================
RCS file: /cvsroot/qemu/qemu/target-arm/nwfpe/fpa11.c,v
retrieving revision 1.1
diff -u -r1.1 fpa11.c
--- target-arm/nwfpe/fpa11.c	16 Feb 2004 21:43:58 -0000	1.1
+++ target-arm/nwfpe/fpa11.c	2 Mar 2005 12:37:50 -0000
@@ -155,6 +155,8 @@
     SetRoundingPrecision(ROUND_EXTENDED);
     fpa11->initflag = 1;
   }
+  
+  float_exception_flags = 0;
 
   if (TEST_OPCODE(opcode,MASK_CPRT))
   {
@@ -185,6 +187,11 @@
   }
 
 //  restore_flags(flags);
+  if(nRc == 1 && float_exception_flags)
+  {
+    //printf("fef 0x%x\n",float_exception_flags);
+    nRc=-float_exception_flags;
+  }
 
   //printf("returning %d\n",nRc);
   return(nRc);

      parent reply	other threads:[~2005-03-02 13:49 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-02-23 11:50 [Qemu-devel] *-user fixes Ulrich Hecht
2005-02-23 12:34 ` Jim Hawkins
2005-03-02 13:27 ` Ulrich Hecht [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200503021427.13142.uli@suse.de \
    --to=uli@suse.de \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.