From: Gerd Knorr <kraxel@bytesex.org>
To: Andrew Morton <akpm@osdl.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: [patch] v4l: IR common update
Date: Tue, 8 Mar 2005 11:43:54 +0100 [thread overview]
Message-ID: <20050308104354.GA30665@bytesex> (raw)
Changes:
* add some keytables which are used by both bttv and cx88 driver
so they can be shared.
* add IR decoding helper functions.
Signed-off-by: Gerd Knorr <kraxel@bytesex.org>
---
drivers/media/common/ir-common.c | 164 ++++++++++++++++++++++++++++++-
include/media/ir-common.h | 6 -
2 files changed, 167 insertions(+), 3 deletions(-)
Index: linux-2.6.11/include/media/ir-common.h
===================================================================
--- linux-2.6.11.orig/include/media/ir-common.h 2005-03-07 10:15:15.000000000 +0100
+++ linux-2.6.11/include/media/ir-common.h 2005-03-07 16:17:34.000000000 +0100
@@ -1,5 +1,5 @@
/*
- * $Id: ir-common.h,v 1.6 2004/09/15 16:15:24 kraxel Exp $
+ * $Id: ir-common.h,v 1.8 2005/02/22 12:28:40 kraxel Exp $
*
* some common structs and functions to handle infrared remotes via
* input layer ...
@@ -47,7 +47,9 @@ struct ir_input_state {
};
extern IR_KEYTAB_TYPE ir_codes_rc5_tv[IR_KEYTAB_SIZE];
+extern IR_KEYTAB_TYPE ir_codes_winfast[IR_KEYTAB_SIZE];
extern IR_KEYTAB_TYPE ir_codes_empty[IR_KEYTAB_SIZE];
+extern IR_KEYTAB_TYPE ir_codes_hauppauge_new[IR_KEYTAB_SIZE];
void ir_input_init(struct input_dev *dev, struct ir_input_state *ir,
int ir_type, IR_KEYTAB_TYPE *ir_codes);
@@ -55,6 +57,8 @@ void ir_input_nokey(struct input_dev *de
void ir_input_keydown(struct input_dev *dev, struct ir_input_state *ir,
u32 ir_key, u32 ir_raw);
u32 ir_extract_bits(u32 data, u32 mask);
+int ir_dump_samples(u32 *samples, int count);
+int ir_decode_biphase(u32 *samples, int count, int low, int high);
/*
* Local variables:
Index: linux-2.6.11/drivers/media/common/ir-common.c
===================================================================
--- linux-2.6.11.orig/drivers/media/common/ir-common.c 2005-03-07 10:14:43.000000000 +0100
+++ linux-2.6.11/drivers/media/common/ir-common.c 2005-03-07 16:17:34.000000000 +0100
@@ -1,5 +1,5 @@
/*
- * $Id: ir-common.c,v 1.6 2004/12/10 12:33:39 kraxel Exp $
+ * $Id: ir-common.c,v 1.8 2005/02/22 12:28:40 kraxel Exp $
*
* some common structs and functions to handle infrared remotes via
* input layer ...
@@ -23,7 +23,6 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
-
#include <media/ir-common.h>
/* -------------------------------------------------------------------------- */
@@ -45,6 +44,7 @@ module_param(debug, int, 0644);
/* generic RC5 keytable */
/* see http://users.pandora.be/nenya/electronics/rc5/codes00.htm */
+/* used by old (black) Hauppauge remotes */
IR_KEYTAB_TYPE ir_codes_rc5_tv[IR_KEYTAB_SIZE] = {
[ 0x00 ] = KEY_KP0, // 0
[ 0x01 ] = KEY_KP1, // 1
@@ -117,12 +117,102 @@ IR_KEYTAB_TYPE ir_codes_rc5_tv[IR_KEYTAB
};
EXPORT_SYMBOL_GPL(ir_codes_rc5_tv);
+/* Table for Leadtek Winfast Remote Controls - used by both bttv and cx88 */
+IR_KEYTAB_TYPE ir_codes_winfast[IR_KEYTAB_SIZE] = {
+ [ 5 ] = KEY_KP1,
+ [ 6 ] = KEY_KP2,
+ [ 7 ] = KEY_KP3,
+ [ 9 ] = KEY_KP4,
+ [ 10 ] = KEY_KP5,
+ [ 11 ] = KEY_KP6,
+ [ 13 ] = KEY_KP7,
+ [ 14 ] = KEY_KP8,
+ [ 15 ] = KEY_KP9,
+ [ 18 ] = KEY_KP0,
+
+ [ 0 ] = KEY_POWER,
+// [ 27 ] = MTS button
+ [ 2 ] = KEY_TUNER, // TV/FM
+ [ 30 ] = KEY_VIDEO,
+// [ 22 ] = display button
+ [ 4 ] = KEY_VOLUMEUP,
+ [ 8 ] = KEY_VOLUMEDOWN,
+ [ 12 ] = KEY_CHANNELUP,
+ [ 16 ] = KEY_CHANNELDOWN,
+ [ 3 ] = KEY_ZOOM, // fullscreen
+ [ 31 ] = KEY_SUBTITLE, // closed caption/teletext
+ [ 32 ] = KEY_SLEEP,
+// [ 41 ] = boss key
+ [ 20 ] = KEY_MUTE,
+ [ 43 ] = KEY_RED,
+ [ 44 ] = KEY_GREEN,
+ [ 45 ] = KEY_YELLOW,
+ [ 46 ] = KEY_BLUE,
+ [ 24 ] = KEY_KPPLUS, //fine tune +
+ [ 25 ] = KEY_KPMINUS, //fine tune -
+// [ 42 ] = picture in picture
+ [ 33 ] = KEY_KPDOT,
+ [ 19 ] = KEY_KPENTER,
+// [ 17 ] = recall
+ [ 34 ] = KEY_BACK,
+ [ 35 ] = KEY_PLAYPAUSE,
+ [ 36 ] = KEY_NEXT,
+// [ 37 ] = time shifting
+ [ 38 ] = KEY_STOP,
+ [ 39 ] = KEY_RECORD
+// [ 40 ] = snapshot
+};
+EXPORT_SYMBOL_GPL(ir_codes_winfast);
+
/* empty keytable, can be used as placeholder for not-yet created keytables */
IR_KEYTAB_TYPE ir_codes_empty[IR_KEYTAB_SIZE] = {
[ 42 ] = KEY_COFFEE,
};
EXPORT_SYMBOL_GPL(ir_codes_empty);
+/* Hauppauge: the newer, gray remotes (seems there are multiple
+ * slightly different versions), shipped with cx88+ivtv cards.
+ * almost rc5 coding, but some non-standard keys */
+IR_KEYTAB_TYPE ir_codes_hauppauge_new[IR_KEYTAB_SIZE] = {
+ [ 0x00 ] = KEY_KP0, // 0
+ [ 0x01 ] = KEY_KP1, // 1
+ [ 0x02 ] = KEY_KP2, // 2
+ [ 0x03 ] = KEY_KP3, // 3
+ [ 0x04 ] = KEY_KP4, // 4
+ [ 0x05 ] = KEY_KP5, // 5
+ [ 0x06 ] = KEY_KP6, // 6
+ [ 0x07 ] = KEY_KP7, // 7
+ [ 0x08 ] = KEY_KP8, // 8
+ [ 0x09 ] = KEY_KP9, // 9
+ [ 0x0b ] = KEY_RED, // red button
+ [ 0x0c ] = KEY_OPTION, // black key without text
+ [ 0x0d ] = KEY_MENU, // menu
+ [ 0x0f ] = KEY_MUTE, // mute
+ [ 0x10 ] = KEY_VOLUMEUP, // volume +
+ [ 0x11 ] = KEY_VOLUMEDOWN, // volume -
+ [ 0x1e ] = KEY_NEXT, // skip >|
+ [ 0x1f ] = KEY_EXIT, // back/exit
+ [ 0x20 ] = KEY_CHANNELUP, // channel / program +
+ [ 0x21 ] = KEY_CHANNELDOWN, // channel / program -
+ [ 0x22 ] = KEY_CHANNEL, // source (old black remote)
+ [ 0x24 ] = KEY_PREVIOUS, // replay |<
+ [ 0x25 ] = KEY_ENTER, // OK
+ [ 0x26 ] = KEY_SLEEP, // minimize (old black remote)
+ [ 0x29 ] = KEY_BLUE, // blue key
+ [ 0x2e ] = KEY_GREEN, // green button
+ [ 0x30 ] = KEY_PAUSE, // pause
+ [ 0x32 ] = KEY_REWIND, // backward <<
+ [ 0x34 ] = KEY_FASTFORWARD, // forward >>
+ [ 0x35 ] = KEY_PLAY, // play
+ [ 0x36 ] = KEY_STOP, // stop
+ [ 0x37 ] = KEY_RECORD, // recording
+ [ 0x38 ] = KEY_YELLOW, // yellow key
+ [ 0x3b ] = KEY_SELECT, // top right button
+ [ 0x3c ] = KEY_ZOOM, // full
+ [ 0x3d ] = KEY_POWER, // system power (green button)
+};
+EXPORT_SYMBOL(ir_codes_hauppauge_new);
+
/* -------------------------------------------------------------------------- */
static void ir_input_key_event(struct input_dev *dev, struct ir_input_state *ir)
@@ -192,6 +282,8 @@ void ir_input_keydown(struct input_dev *
#endif
}
+/* -------------------------------------------------------------------------- */
+
u32 ir_extract_bits(u32 data, u32 mask)
{
int mbit, vbit;
@@ -209,10 +301,78 @@ u32 ir_extract_bits(u32 data, u32 mask)
return value;
}
+static int inline getbit(u32 *samples, int bit)
+{
+ return (samples[bit/32] & (1 << (31-(bit%32)))) ? 1 : 0;
+}
+
+/* sump raw samples for visual debugging ;) */
+int ir_dump_samples(u32 *samples, int count)
+{
+ int i, bit, start;
+
+ printk(KERN_DEBUG "ir samples: ");
+ start = 0;
+ for (i = 0; i < count * 32; i++) {
+ bit = getbit(samples,i);
+ if (bit)
+ start = 1;
+ if (0 == start)
+ continue;
+ printk("%s", bit ? "#" : "_");
+ }
+ printk("\n");
+ return 0;
+}
+
+/* decode raw samples, biphase coding, used by rc5 for example */
+int ir_decode_biphase(u32 *samples, int count, int low, int high)
+{
+ int i,last,bit,len,flips;
+ u32 value;
+
+ /* find start bit (1) */
+ for (i = 0; i < 32; i++) {
+ bit = getbit(samples,i);
+ if (bit)
+ break;
+ }
+
+ /* go decoding */
+ len = 0;
+ flips = 0;
+ value = 1;
+ for (; i < count * 32; i++) {
+ if (len > high)
+ break;
+ if (flips > 1)
+ break;
+ last = bit;
+ bit = getbit(samples,i);
+ if (last == bit) {
+ len++;
+ continue;
+ }
+ if (len < low) {
+ len++;
+ flips++;
+ continue;
+ }
+ value <<= 1;
+ value |= bit;
+ flips = 0;
+ len = 1;
+ }
+ return value;
+}
+
EXPORT_SYMBOL_GPL(ir_input_init);
EXPORT_SYMBOL_GPL(ir_input_nokey);
EXPORT_SYMBOL_GPL(ir_input_keydown);
+
EXPORT_SYMBOL_GPL(ir_extract_bits);
+EXPORT_SYMBOL_GPL(ir_dump_samples);
+EXPORT_SYMBOL_GPL(ir_decode_biphase);
/*
* Local variables:
--
#define printk(args...) fprintf(stderr, ## args)
reply other threads:[~2005-03-08 10:52 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050308104354.GA30665@bytesex \
--to=kraxel@bytesex.org \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.