From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andrew Gaydenko Subject: Aureon71, two parallel stereo outputs Date: Thu, 10 Mar 2005 20:35:19 +0300 Message-ID: <200503102035.19825@goldspace.net> Mime-Version: 1.0 Content-Type: text/plain; charset="koi8-r" Content-Transfer-Encoding: 7bit Content-Disposition: inline Sender: alsa-devel-admin@lists.sourceforge.net Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org Hi, I have ice1724 card (Terratec Aureon 7.1 Space, driver is 1.0.8). It has four analogue stereo outputs. I'd like to use two of these outputs this way: - line output 1 - stereo channel for head phones (it is the only output with head phones amplifier), - line output 2 - stereo channel to connect to an external audio amplifier. How to make .asoundrc file to accomplish this tasks? I understand, some alsa device must be configured, but it's all I understand :-) My own attempts results: I'm able to hear line outputs 1/2/3/4 with appropriate JACK-routing. So, hardware works. Moreover, I was able to write appropriate qamix XML config file, and all the controls are in sync with alsamixer. Now I know a mapping between hw:0,0 subdevices, mixer controls and the card output jacks. But attempts to understand .asoundrc secrets are not such lucky. For example, 'aplay -D rear/front' gives the 'Sample format non available' error (without any redefinitions for rear/front devices). P.S. I'm ready to test something concerning Aureon71 with alsa from CVS :-) Thanks! Andrew ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click