From: Pavel Machek <pavel@ucw.cz>
To: Andrew Morton <akpm@osdl.org>, Greg KH <greg@kroah.com>,
kernel list <linux-kernel@vger.kernel.org>
Subject: Re: fix-u32-vs-pm_message_t-in-usb
Date: Fri, 11 Mar 2005 14:08:31 +0100 [thread overview]
Message-ID: <20050311130831.GC1379@elf.ucw.cz> (raw)
In-Reply-To: <20050310223353.47601d54.akpm@osdl.org>
Hi!
> This patch has been spitting warnings:
>
> drivers/usb/host/uhci-hcd.c:838: warning: initialization from incompatible pointer type
> drivers/usb/host/ohci-pci.c:191: warning: initialization from incompatible pointer type
>
> Because hc_driver.suspend() takes a u32 as its second arg. Changing that
> to pci_power_t causes build failures and including pci.h in usb.h seems
> wrong.
>
> Wanna fix it sometime?
Yep. Here it is.
This fixes remaining confusion. Part of my old patch was merged, I
later decided passing pci_power_t down to drivers is bad idea; this
passes them pm_message_t which contains more info (and actually works
:-). Please apply,
Signed-off-by: Pavel Machek <pavel@suse.cz>
Pavel
--- clean-mm/drivers/usb/core/hcd-pci.c 2005-03-11 11:25:37.000000000 +0100
+++ linux-mm/drivers/usb/core/hcd-pci.c 2005-03-11 13:46:41.000000000 +0100
@@ -205,11 +205,12 @@
*
* Store this function in the HCD's struct pci_driver as suspend().
*/
-int usb_hcd_pci_suspend (struct pci_dev *dev, u32 state)
+int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t pmsg)
{
struct usb_hcd *hcd;
int retval = 0;
int has_pci_pm;
+ pci_power_t state;
hcd = pci_get_drvdata(dev);
@@ -218,8 +219,10 @@
* PM-sensitive HCDs may already have done this.
*/
has_pci_pm = pci_find_capability(dev, PCI_CAP_ID_PM);
- if (state > 4)
- state = 4;
+
+ state = pci_choose_state(dev, pmsg);
+ if (state > PCI_D3cold)
+ state = PCI_D3cold;
switch (hcd->state) {
@@ -228,7 +231,7 @@
*/
case USB_STATE_RUNNING:
hcd->state = USB_STATE_QUIESCING;
- retval = hcd->driver->suspend (hcd, state);
+ retval = hcd->driver->suspend (hcd, pmsg);
if (retval) {
dev_dbg (hcd->self.controller,
"suspend fail, retval %d\n",
@@ -291,9 +294,6 @@
break;
}
- /* update power_state **ONLY** to make sysfs happier */
- if (retval == 0)
- dev->dev.power.power_state = state;
return retval;
}
EXPORT_SYMBOL (usb_hcd_pci_suspend);
--- clean-mm/drivers/usb/core/hcd.h 2005-03-11 11:25:37.000000000 +0100
+++ linux-mm/drivers/usb/core/hcd.h 2005-03-11 13:44:18.000000000 +0100
@@ -175,7 +175,7 @@
* a whole, not just the root hub; they're for bus glue.
*/
/* called after all devices were suspended */
- int (*suspend) (struct usb_hcd *hcd, u32 state);
+ int (*suspend) (struct usb_hcd *hcd, pm_message_t state);
/* called before any devices get resumed */
int (*resume) (struct usb_hcd *hcd);
--- clean-mm/drivers/usb/host/ehci-hcd.c 2005-03-11 11:25:37.000000000 +0100
+++ linux-mm/drivers/usb/host/ehci-hcd.c 2005-03-11 13:44:18.000000000 +0100
@@ -721,7 +721,7 @@
* the right sort of wakeup.
*/
-static int ehci_suspend (struct usb_hcd *hcd, pci_power_t state)
+static int ehci_suspend (struct usb_hcd *hcd, pm_message_t state)
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
--- clean-mm/drivers/usb/host/ohci-pci.c 2005-03-11 11:25:37.000000000 +0100
+++ linux-mm/drivers/usb/host/ohci-pci.c 2005-03-11 13:44:18.000000000 +0100
@@ -102,7 +102,7 @@
#ifdef CONFIG_PM
-static int ohci_pci_suspend (struct usb_hcd *hcd, pci_power_t state)
+static int ohci_pci_suspend (struct usb_hcd *hcd, pm_message_t state)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
--- clean-mm/drivers/usb/host/uhci-hcd.c 2005-03-11 11:25:37.000000000 +0100
+++ linux-mm/drivers/usb/host/uhci-hcd.c 2005-03-11 13:44:18.000000000 +0100
@@ -758,7 +758,7 @@
}
#ifdef CONFIG_PM
-static int uhci_suspend(struct usb_hcd *hcd, pci_power_t state)
+static int uhci_suspend(struct usb_hcd *hcd, pm_message_t state)
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
--- clean-mm/drivers/video/aty/radeon_pm.c 2005-03-11 11:25:38.000000000 +0100
+++ linux-mm/drivers/video/aty/radeon_pm.c 2005-03-11 13:56:52.000000000 +0100
@@ -2521,7 +2521,7 @@
static/*extern*/ int susdisking = 0;
-int radeonfb_pci_suspend(struct pci_dev *pdev, u32 state)
+int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct fb_info *info = pci_get_drvdata(pdev);
struct radeonfb_info *rinfo = info->par;
--- clean-mm/include/linux/usb.h 2005-03-11 11:25:39.000000000 +0100
+++ linux-mm/include/linux/usb.h 2005-03-11 13:44:18.000000000 +0100
@@ -558,7 +558,7 @@
int (*ioctl) (struct usb_interface *intf, unsigned int code, void *buf);
- int (*suspend) (struct usb_interface *intf, u32 state);
+ int (*suspend) (struct usb_interface *intf, pm_message_t state);
int (*resume) (struct usb_interface *intf);
const struct usb_device_id *id_table;
@@ -977,7 +977,7 @@
int timeout);
/* selective suspend/resume */
-extern int usb_suspend_device(struct usb_device *dev, u32 state);
+extern int usb_suspend_device(struct usb_device *dev, pm_message_t state);
extern int usb_resume_device(struct usb_device *dev);
--
People were complaining that M$ turns users into beta-testers...
...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!
next parent reply other threads:[~2005-03-11 13:08 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20050310223353.47601d54.akpm@osdl.org>
2005-03-11 13:08 ` Pavel Machek [this message]
2005-03-18 21:43 ` fix-u32-vs-pm_message_t-in-usb Greg KH
2005-03-18 23:44 ` fix-u32-vs-pm_message_t-in-usb Pavel Machek
2005-03-18 23:53 ` fix-u32-vs-pm_message_t-in-usb Andrew Morton
2005-03-19 0:00 ` fix-u32-vs-pm_message_t-in-usb Pavel Machek
2005-03-19 0:28 ` fix-u32-vs-pm_message_t-in-usb Pavel Machek
2005-03-11 13:10 ` fix-u32-vs-pm_message_t-in-usb Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050311130831.GC1379@elf.ucw.cz \
--to=pavel@ucw.cz \
--cc=akpm@osdl.org \
--cc=greg@kroah.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.