All of lore.kernel.org
 help / color / mirror / Atom feed
From: Guylhem Aznar <bluez-devel@externe.net>
To: bluez-devel@lists.sourceforge.net
Subject: Re: [Bluez-devel] Hp bluetooth headset a2dp
Date: Thu, 24 Mar 2005 12:26:51 -0500	[thread overview]
Message-ID: <20050324172651.GA30134@externe.net> (raw)
In-Reply-To: <20050324165647.GA12921@externe.net>

On Thursday, 24 March 2005 at 11:56:47 (-0500), Guylhem Aznar wrote:
> I started to do something else, and now even after power cycling,
> relinking, it's not playing anymore.

More details - I was using a different test file, to try to record it
on the receiving end and compare it to the source (maybe there're
recongnisable patterns in the acceleration sequence?)

My test file was a metronome (tick tick tick etc.) at 11050 Mhz which
seems to have caused that problem. After refusing to play at that
frequency, it refuses everything else.  It seems to be able to play
again but only after power cycling.

With the bad mp3:

MPEG 2.5 layer III, 32 kbit/s, 11025 Hz mono
subbands =3D 0
allocation method =3D 0
channel_mode =3D 0
blocks =3D 0
sampling frequency =3D 0
bitpool =3D 0
frame len =3D 2
Using address: 00:0D:44:2A:09:00
Found A2DP Sink
Connected [imtu 672, omtu 672, flush_to 65535]
got capabilities response
headset does not support this frequency
sent set_config
set config rejected
couldn't locate the correct seid

Then afterwards:

subbands =3D 1
allocation method =3D 1
channel_mode =3D 2
blocks =3D 3
sampling frequency =3D 2
bitpool =3D 32
frame len =3D 72
Using address: 00:0D:44:2A:09:00
Found A2DP Sink
Connected [imtu 672, omtu 672, flush_to 65535]
got capabilities response
sent set_config
set config rejected
couldn't locate the correct seid

That's using the very same mp3 that was accepted before. I think it
may need to be told that this one was using a different frequency.

Regarding the 10 s metronome mp3, after playing it many many times I
realised that:
 - the audio was a little bit faster approx 50% of the time
 - it was a little big slower maybe 20% of the time, an normal 30%
 - it was changing during a playback session, with accelerations and
   decelerations. These changes of pace seems to follow a pattern : in
a 10 s sample, 2 sec to slow, 1 normal, 7 too fast - that's the most
frequent pattern I get, with rates of accelerations varying depending
on the samples.

However during a longer mp3 playback, I had phases of acceleration and
deceleration. I don't have a metronome mp3 longer than 10s, so I'm
unable to document that. However I hope this data will help fixing
a2play.


--=20
Bien =E0 vous - Best regards,
Guylhem P. Aznar

--=20
*@externe.net                                            http://externe.n=
et
P=E9rim=E9/Deprecated:    @oeil.qc.ca, @metalab.unc.edu, @ibiblio.org, @7=
un.org
GPG: 92EB37C1 DD11C9C9 20519D01 E8FA1B11 42975AF7 http://externe.net/pubk=
ey


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

  parent reply	other threads:[~2005-03-24 17:26 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-03-24 16:56 [Bluez-devel] Hp bluetooth headset a2dp Guylhem Aznar
2005-03-24 17:04 ` Marcel Holtmann
2005-03-24 17:33   ` Guylhem Aznar
2005-03-24 17:26 ` Guylhem Aznar [this message]
  -- strict thread matches above, loose matches on Subject: below --
2005-03-24 18:34 Shawn Rutledge
2005-03-24 22:58 ` Marcel Holtmann
2005-03-24 22:59 ` Guylhem Aznar
2005-03-25  0:20 Shawn Rutledge
2005-03-25  0:31 ` Marcel Holtmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20050324172651.GA30134@externe.net \
    --to=bluez-devel@externe.net \
    --cc=bluez-devel@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.