From: Adrian Bunk <bunk@stusta.de>
To: netdev@oss.sgi.com
Cc: linux-kernel@vger.kernel.org
Subject: [2.6 patch] drivers/net/wan/: possible cleanups
Date: Sun, 27 Mar 2005 16:34:18 +0200 [thread overview]
Message-ID: <20050327143418.GE4285@stusta.de> (raw)
This patch contains the following possible cleanups:
- make needlessly global code static
- #if 0 the following unused global function:
- sdladrv.c: sdla_intde
- remove the following unused global variable:
- lmc_media.c: lmc_t1_cables
- remove the following unneeded EXPORT_SYMBOL's:
- cycx_drv.c: cycx_inten
- sdladrv.c: sdla_inten
- sdladrv.c: sdla_intde
- sdladrv.c: sdla_intack
- sdladrv.c: sdla_intr
- syncppp.c: sppp_input
- syncppp.c: sppp_change_mtu
- z85230.c: z8530_dma_sync
- z85230.c: z8530_txdma_sync
Signed-off-by: Adrian Bunk <bunk@stusta.de>
---
This patch was already sent on:
- 11 Mar 2005
- 19 Feb 2005
drivers/net/wan/cycx_drv.c | 7 +-
drivers/net/wan/cycx_main.c | 2
drivers/net/wan/farsync.c | 24 ++++----
drivers/net/wan/hdlc_fr.c | 2
drivers/net/wan/lmc/lmc_media.c | 8 --
drivers/net/wan/pc300.h | 16 -----
drivers/net/wan/pc300_drv.c | 87 ++++++++++++++++----------------
drivers/net/wan/sdla.c | 20 +++----
drivers/net/wan/sdladrv.c | 16 ++---
drivers/net/wan/syncppp.c | 10 +--
drivers/net/wan/z85230.c | 8 --
include/linux/cycx_drv.h | 1
include/linux/sdladrv.h | 4 -
include/net/syncppp.h | 1
--- linux-2.6.11-rc3-mm2-full/include/linux/cycx_drv.h.old 2005-02-16 19:14:39.000000000 +0100
+++ linux-2.6.11-rc3-mm2-full/include/linux/cycx_drv.h 2005-02-16 19:14:46.000000000 +0100
@@ -60,6 +60,5 @@
extern int cycx_poke(struct cycx_hw *hw, u32 addr, void *buf, u32 len);
extern int cycx_exec(void __iomem *addr);
-extern void cycx_inten(struct cycx_hw *hw);
extern void cycx_intr(struct cycx_hw *hw);
#endif /* _CYCX_DRV_H */
--- linux-2.6.11-rc3-mm2-full/drivers/net/wan/cycx_drv.c.old 2005-02-16 19:14:55.000000000 +0100
+++ linux-2.6.11-rc3-mm2-full/drivers/net/wan/cycx_drv.c 2005-02-16 19:15:35.000000000 +0100
@@ -110,7 +110,7 @@
* < 0 error.
* Context: process */
-int __init cycx_drv_init(void)
+static int __init cycx_drv_init(void)
{
printk(KERN_INFO "%s v%u.%u %s\n", fullname, MOD_VERSION, MOD_RELEASE,
copyright);
@@ -120,7 +120,7 @@
/* Module 'remove' entry point.
* o release all remaining system resources */
-void cycx_drv_cleanup(void)
+static void cycx_drv_cleanup(void)
{
}
@@ -185,8 +185,7 @@
}
/* Enable interrupt generation. */
-EXPORT_SYMBOL(cycx_inten);
-void cycx_inten(struct cycx_hw *hw)
+static void cycx_inten(struct cycx_hw *hw)
{
writeb(0, hw->dpmbase);
}
--- linux-2.6.11-rc3-mm2-full/drivers/net/wan/cycx_main.c.old 2005-02-16 19:46:47.000000000 +0100
+++ linux-2.6.11-rc3-mm2-full/drivers/net/wan/cycx_main.c 2005-02-16 19:47:00.000000000 +0100
@@ -103,7 +103,7 @@
* < 0 error.
* Context: process
*/
-int __init cycx_init(void)
+static int __init cycx_init(void)
{
int cnt, err = -ENOMEM;
--- linux-2.6.11-rc3-mm2-full/drivers/net/wan/farsync.c.old 2005-02-16 23:57:37.000000000 +0100
+++ linux-2.6.11-rc3-mm2-full/drivers/net/wan/farsync.c 2005-02-17 00:00:26.000000000 +0100
@@ -74,11 +74,11 @@
/*
* Modules parameters and associated varaibles
*/
-int fst_txq_low = FST_LOW_WATER_MARK;
-int fst_txq_high = FST_HIGH_WATER_MARK;
-int fst_max_reads = 7;
-int fst_excluded_cards = 0;
-int fst_excluded_list[FST_MAX_CARDS];
+static int fst_txq_low = FST_LOW_WATER_MARK;
+static int fst_txq_high = FST_HIGH_WATER_MARK;
+static int fst_max_reads = 7;
+static int fst_excluded_cards = 0;
+static int fst_excluded_list[FST_MAX_CARDS];
module_param(fst_txq_low, int, 0);
module_param(fst_txq_high, int, 0);
@@ -572,13 +572,13 @@
static void fst_process_tx_work_q(unsigned long work_q);
static void fst_process_int_work_q(unsigned long work_q);
-DECLARE_TASKLET(fst_tx_task, fst_process_tx_work_q, 0);
-DECLARE_TASKLET(fst_int_task, fst_process_int_work_q, 0);
+static DECLARE_TASKLET(fst_tx_task, fst_process_tx_work_q, 0);
+static DECLARE_TASKLET(fst_int_task, fst_process_int_work_q, 0);
-struct fst_card_info *fst_card_array[FST_MAX_CARDS];
-spinlock_t fst_work_q_lock;
-u64 fst_work_txq;
-u64 fst_work_intq;
+static struct fst_card_info *fst_card_array[FST_MAX_CARDS];
+static spinlock_t fst_work_q_lock;
+static u64 fst_work_txq;
+static u64 fst_work_intq;
static void
fst_q_work_item(u64 * queue, int card_index)
@@ -1498,7 +1498,7 @@
* The interrupt service routine
* Dev_id is our fst_card_info pointer
*/
-irqreturn_t
+static irqreturn_t
fst_intr(int irq, void *dev_id, struct pt_regs *regs)
{
struct fst_card_info *card;
--- linux-2.6.11-rc3-mm2-full/drivers/net/wan/hdlc_fr.c.old 2005-02-17 00:00:38.000000000 +0100
+++ linux-2.6.11-rc3-mm2-full/drivers/net/wan/hdlc_fr.c 2005-02-17 00:00:46.000000000 +0100
@@ -347,7 +347,7 @@
-int pvc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+static int pvc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
pvc_device *pvc = dev_to_pvc(dev);
fr_proto_pvc_info info;
--- linux-2.6.11-rc3-mm2-full/drivers/net/wan/lmc/lmc_media.c.old 2005-02-17 00:02:29.000000000 +0100
+++ linux-2.6.11-rc3-mm2-full/drivers/net/wan/lmc/lmc_media.c 2005-02-17 00:02:47.000000000 +0100
@@ -48,14 +48,6 @@
*/
/*
- * For lack of a better place, put the SSI cable stuff here.
- */
-char *lmc_t1_cables[] = {
- "V.10/RS423", "EIA530A", "reserved", "X.21", "V.35",
- "EIA449/EIA530/V.36", "V.28/EIA232", "none", NULL
-};
-
-/*
* protocol independent method.
*/
static void lmc_set_protocol (lmc_softc_t * const, lmc_ctl_t *);
--- linux-2.6.11-rc3-mm2-full/drivers/net/wan/pc300.h.old 2005-02-17 00:03:07.000000000 +0100
+++ linux-2.6.11-rc3-mm2-full/drivers/net/wan/pc300.h 2005-02-17 00:55:23.000000000 +0100
@@ -472,24 +472,8 @@
#ifdef __KERNEL__
/* Function Prototypes */
-int dma_buf_write(pc300_t *, int, ucchar *, int);
-int dma_buf_read(pc300_t *, int, struct sk_buff *);
void tx_dma_start(pc300_t *, int);
-void rx_dma_start(pc300_t *, int);
-void tx_dma_stop(pc300_t *, int);
-void rx_dma_stop(pc300_t *, int);
-int cpc_queue_xmit(struct sk_buff *, struct net_device *);
-void cpc_net_rx(struct net_device *);
-void cpc_sca_status(pc300_t *, int);
-int cpc_change_mtu(struct net_device *, int);
-int cpc_ioctl(struct net_device *, struct ifreq *, int);
-int ch_config(pc300dev_t *);
-int rx_config(pc300dev_t *);
-int tx_config(pc300dev_t *);
-void cpc_opench(pc300dev_t *);
-void cpc_closech(pc300dev_t *);
int cpc_open(struct net_device *dev);
-int cpc_close(struct net_device *dev);
int cpc_set_media(hdlc_device *, int);
#endif /* __KERNEL__ */
--- linux-2.6.11-rc3-mm2-full/drivers/net/wan/pc300_drv.c.old 2005-02-17 00:03:20.000000000 +0100
+++ linux-2.6.11-rc3-mm2-full/drivers/net/wan/pc300_drv.c 2005-02-17 00:14:10.000000000 +0100
@@ -291,6 +291,7 @@
static void plx_init(pc300_t *);
static void cpc_trace(struct net_device *, struct sk_buff *, char);
static int cpc_attach(struct net_device *, unsigned short, unsigned short);
+static int cpc_close(struct net_device *dev);
#ifdef CONFIG_PC300_MLPPP
void cpc_tty_init(pc300dev_t * dev);
@@ -437,7 +438,7 @@
printk("\n");
}
-int dma_get_rx_frame_size(pc300_t * card, int ch)
+static int dma_get_rx_frame_size(pc300_t * card, int ch)
{
volatile pcsca_bd_t __iomem *ptdescr;
ucshort first_bd = card->chan[ch].rx_first_bd;
@@ -462,7 +463,7 @@
* dma_buf_write: writes a frame to the Tx DMA buffers
* NOTE: this function writes one frame at a time.
*/
-int dma_buf_write(pc300_t * card, int ch, ucchar * ptdata, int len)
+static int dma_buf_write(pc300_t * card, int ch, ucchar * ptdata, int len)
{
int i, nchar;
volatile pcsca_bd_t __iomem *ptdescr;
@@ -503,7 +504,7 @@
* dma_buf_read: reads a frame from the Rx DMA buffers
* NOTE: this function reads one frame at a time.
*/
-int dma_buf_read(pc300_t * card, int ch, struct sk_buff *skb)
+static int dma_buf_read(pc300_t * card, int ch, struct sk_buff *skb)
{
int nchar;
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
@@ -560,7 +561,7 @@
return (rcvd);
}
-void tx_dma_stop(pc300_t * card, int ch)
+static void tx_dma_stop(pc300_t * card, int ch)
{
void __iomem *scabase = card->hw.scabase;
ucchar drr_ena_bit = 1 << (5 + 2 * ch);
@@ -571,7 +572,7 @@
cpc_writeb(scabase + DRR, drr_rst_bit & ~drr_ena_bit);
}
-void rx_dma_stop(pc300_t * card, int ch)
+static void rx_dma_stop(pc300_t * card, int ch)
{
void __iomem *scabase = card->hw.scabase;
ucchar drr_ena_bit = 1 << (4 + 2 * ch);
@@ -582,7 +583,7 @@
cpc_writeb(scabase + DRR, drr_rst_bit & ~drr_ena_bit);
}
-void rx_dma_start(pc300_t * card, int ch)
+static void rx_dma_start(pc300_t * card, int ch)
{
void __iomem *scabase = card->hw.scabase;
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
@@ -607,7 +608,7 @@
/*************************/
/*** FALC Routines ***/
/*************************/
-void falc_issue_cmd(pc300_t * card, int ch, ucchar cmd)
+static void falc_issue_cmd(pc300_t * card, int ch, ucchar cmd)
{
void __iomem *falcbase = card->hw.falcbase;
unsigned long i = 0;
@@ -622,7 +623,7 @@
cpc_writeb(falcbase + F_REG(CMDR, ch), cmd);
}
-void falc_intr_enable(pc300_t * card, int ch)
+static void falc_intr_enable(pc300_t * card, int ch)
{
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
@@ -672,7 +673,7 @@
}
}
-void falc_open_timeslot(pc300_t * card, int ch, int timeslot)
+static void falc_open_timeslot(pc300_t * card, int ch, int timeslot)
{
void __iomem *falcbase = card->hw.falcbase;
ucchar tshf = card->chan[ch].falc.offset;
@@ -688,7 +689,7 @@
(0x80 >> (timeslot & 0x07)));
}
-void falc_close_timeslot(pc300_t * card, int ch, int timeslot)
+static void falc_close_timeslot(pc300_t * card, int ch, int timeslot)
{
void __iomem *falcbase = card->hw.falcbase;
ucchar tshf = card->chan[ch].falc.offset;
@@ -704,7 +705,7 @@
~(0x80 >> (timeslot & 0x07)));
}
-void falc_close_all_timeslots(pc300_t * card, int ch)
+static void falc_close_all_timeslots(pc300_t * card, int ch)
{
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
@@ -726,7 +727,7 @@
}
}
-void falc_open_all_timeslots(pc300_t * card, int ch)
+static void falc_open_all_timeslots(pc300_t * card, int ch)
{
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
@@ -758,7 +759,7 @@
}
}
-void falc_init_timeslot(pc300_t * card, int ch)
+static void falc_init_timeslot(pc300_t * card, int ch)
{
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
@@ -776,7 +777,7 @@
}
}
-void falc_enable_comm(pc300_t * card, int ch)
+static void falc_enable_comm(pc300_t * card, int ch)
{
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
falc_t *pfalc = (falc_t *) & chan->falc;
@@ -792,7 +793,7 @@
~((CPLD_REG1_FALC_DCD | CPLD_REG1_FALC_CTS) << (2 * ch)));
}
-void falc_disable_comm(pc300_t * card, int ch)
+static void falc_disable_comm(pc300_t * card, int ch)
{
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
falc_t *pfalc = (falc_t *) & chan->falc;
@@ -806,7 +807,7 @@
((CPLD_REG1_FALC_DCD | CPLD_REG1_FALC_CTS) << (2 * ch)));
}
-void falc_init_t1(pc300_t * card, int ch)
+static void falc_init_t1(pc300_t * card, int ch)
{
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
@@ -975,7 +976,7 @@
falc_close_all_timeslots(card, ch);
}
-void falc_init_e1(pc300_t * card, int ch)
+static void falc_init_e1(pc300_t * card, int ch)
{
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
@@ -1155,7 +1156,7 @@
falc_close_all_timeslots(card, ch);
}
-void falc_init_hdlc(pc300_t * card, int ch)
+static void falc_init_hdlc(pc300_t * card, int ch)
{
void __iomem *falcbase = card->hw.falcbase;
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
@@ -1181,7 +1182,7 @@
falc_intr_enable(card, ch);
}
-void te_config(pc300_t * card, int ch)
+static void te_config(pc300_t * card, int ch)
{
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
@@ -1241,7 +1242,7 @@
CPC_UNLOCK(card, flags);
}
-void falc_check_status(pc300_t * card, int ch, unsigned char frs0)
+static void falc_check_status(pc300_t * card, int ch, unsigned char frs0)
{
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
@@ -1397,7 +1398,7 @@
}
}
-void falc_update_stats(pc300_t * card, int ch)
+static void falc_update_stats(pc300_t * card, int ch)
{
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
@@ -1450,7 +1451,7 @@
* the synchronizer and then sent to the system interface.
*----------------------------------------------------------------------------
*/
-void falc_remote_loop(pc300_t * card, int ch, int loop_on)
+static void falc_remote_loop(pc300_t * card, int ch, int loop_on)
{
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
@@ -1495,7 +1496,7 @@
* coding must be identical.
*----------------------------------------------------------------------------
*/
-void falc_local_loop(pc300_t * card, int ch, int loop_on)
+static void falc_local_loop(pc300_t * card, int ch, int loop_on)
{
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
falc_t *pfalc = (falc_t *) & chan->falc;
@@ -1522,7 +1523,7 @@
* looped. They are originated by the FALC-LH transmitter.
*----------------------------------------------------------------------------
*/
-void falc_payload_loop(pc300_t * card, int ch, int loop_on)
+static void falc_payload_loop(pc300_t * card, int ch, int loop_on)
{
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
@@ -1576,7 +1577,7 @@
* Description: Turns XLU bit off in the proper register
*----------------------------------------------------------------------------
*/
-void turn_off_xlu(pc300_t * card, int ch)
+static void turn_off_xlu(pc300_t * card, int ch)
{
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
@@ -1597,7 +1598,7 @@
* Description: Turns XLD bit off in the proper register
*----------------------------------------------------------------------------
*/
-void turn_off_xld(pc300_t * card, int ch)
+static void turn_off_xld(pc300_t * card, int ch)
{
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
@@ -1619,7 +1620,7 @@
* to generate a LOOP activation code over a T1/E1 line.
*----------------------------------------------------------------------------
*/
-void falc_generate_loop_up_code(pc300_t * card, int ch)
+static void falc_generate_loop_up_code(pc300_t * card, int ch)
{
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
@@ -1652,7 +1653,7 @@
* to generate a LOOP deactivation code over a T1/E1 line.
*----------------------------------------------------------------------------
*/
-void falc_generate_loop_down_code(pc300_t * card, int ch)
+static void falc_generate_loop_down_code(pc300_t * card, int ch)
{
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
@@ -1682,7 +1683,7 @@
* it on the reception side.
*----------------------------------------------------------------------------
*/
-void falc_pattern_test(pc300_t * card, int ch, unsigned int activate)
+static void falc_pattern_test(pc300_t * card, int ch, unsigned int activate)
{
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
@@ -1729,7 +1730,7 @@
* Description: This routine returns the bit error counter value
*----------------------------------------------------------------------------
*/
-ucshort falc_pattern_test_error(pc300_t * card, int ch)
+static ucshort falc_pattern_test_error(pc300_t * card, int ch)
{
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
falc_t *pfalc = (falc_t *) & chan->falc;
@@ -1769,7 +1770,7 @@
netif_rx(skb);
}
-void cpc_tx_timeout(struct net_device *dev)
+static void cpc_tx_timeout(struct net_device *dev)
{
pc300dev_t *d = (pc300dev_t *) dev->priv;
pc300ch_t *chan = (pc300ch_t *) d->chan;
@@ -1797,7 +1798,7 @@
netif_wake_queue(dev);
}
-int cpc_queue_xmit(struct sk_buff *skb, struct net_device *dev)
+static int cpc_queue_xmit(struct sk_buff *skb, struct net_device *dev)
{
pc300dev_t *d = (pc300dev_t *) dev->priv;
pc300ch_t *chan = (pc300ch_t *) d->chan;
@@ -1880,7 +1881,7 @@
return 0;
}
-void cpc_net_rx(struct net_device *dev)
+static void cpc_net_rx(struct net_device *dev)
{
pc300dev_t *d = (pc300dev_t *) dev->priv;
pc300ch_t *chan = (pc300ch_t *) d->chan;
@@ -2403,7 +2404,7 @@
return IRQ_HANDLED;
}
-void cpc_sca_status(pc300_t * card, int ch)
+static void cpc_sca_status(pc300_t * card, int ch)
{
ucchar ilar;
void __iomem *scabase = card->hw.scabase;
@@ -2495,7 +2496,7 @@
}
}
-void cpc_falc_status(pc300_t * card, int ch)
+static void cpc_falc_status(pc300_t * card, int ch)
{
pc300ch_t *chan = &card->chan[ch];
falc_t *pfalc = (falc_t *) & chan->falc;
@@ -2523,7 +2524,7 @@
CPC_UNLOCK(card, flags);
}
-int cpc_change_mtu(struct net_device *dev, int new_mtu)
+static int cpc_change_mtu(struct net_device *dev, int new_mtu)
{
if ((new_mtu < 128) || (new_mtu > PC300_DEF_MTU))
return -EINVAL;
@@ -2531,7 +2532,7 @@
return 0;
}
-int cpc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+static int cpc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
hdlc_device *hdlc = dev_to_hdlc(dev);
pc300dev_t *d = (pc300dev_t *) dev->priv;
@@ -2856,7 +2857,7 @@
}
}
-int ch_config(pc300dev_t * d)
+static int ch_config(pc300dev_t * d)
{
pc300ch_t *chan = (pc300ch_t *) d->chan;
pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
@@ -3004,7 +3005,7 @@
return 0;
}
-int rx_config(pc300dev_t * d)
+static int rx_config(pc300dev_t * d)
{
pc300ch_t *chan = (pc300ch_t *) d->chan;
pc300_t *card = (pc300_t *) chan->card;
@@ -3035,7 +3036,7 @@
return 0;
}
-int tx_config(pc300dev_t * d)
+static int tx_config(pc300dev_t * d)
{
pc300ch_t *chan = (pc300ch_t *) d->chan;
pc300_t *card = (pc300_t *) chan->card;
@@ -3098,7 +3099,7 @@
return 0;
}
-void cpc_opench(pc300dev_t * d)
+static void cpc_opench(pc300dev_t * d)
{
pc300ch_t *chan = (pc300ch_t *) d->chan;
pc300_t *card = (pc300_t *) chan->card;
@@ -3116,7 +3117,7 @@
cpc_readb(scabase + M_REG(CTL, ch)) & ~(CTL_RTS | CTL_DTR));
}
-void cpc_closech(pc300dev_t * d)
+static void cpc_closech(pc300dev_t * d)
{
pc300ch_t *chan = (pc300ch_t *) d->chan;
pc300_t *card = (pc300_t *) chan->card;
@@ -3173,7 +3174,7 @@
return 0;
}
-int cpc_close(struct net_device *dev)
+static int cpc_close(struct net_device *dev)
{
hdlc_device *hdlc = dev_to_hdlc(dev);
pc300dev_t *d = (pc300dev_t *) dev->priv;
--- linux-2.6.11-rc3-mm2-full/drivers/net/wan/sdla.c.old 2005-02-17 00:15:50.000000000 +0100
+++ linux-2.6.11-rc3-mm2-full/drivers/net/wan/sdla.c 2005-02-17 00:17:56.000000000 +0100
@@ -182,7 +182,7 @@
return(byte);
}
-void sdla_stop(struct net_device *dev)
+static void sdla_stop(struct net_device *dev)
{
struct frad_local *flp;
@@ -209,7 +209,7 @@
}
}
-void sdla_start(struct net_device *dev)
+static void sdla_start(struct net_device *dev)
{
struct frad_local *flp;
@@ -247,7 +247,7 @@
*
***************************************************/
-int sdla_z80_poll(struct net_device *dev, int z80_addr, int jiffs, char resp1, char resp2)
+static int sdla_z80_poll(struct net_device *dev, int z80_addr, int jiffs, char resp1, char resp2)
{
unsigned long start, done, now;
char resp, *temp;
@@ -505,7 +505,7 @@
static int sdla_reconfig(struct net_device *dev);
-int sdla_activate(struct net_device *slave, struct net_device *master)
+static int sdla_activate(struct net_device *slave, struct net_device *master)
{
struct frad_local *flp;
int i;
@@ -527,7 +527,7 @@
return(0);
}
-int sdla_deactivate(struct net_device *slave, struct net_device *master)
+static int sdla_deactivate(struct net_device *slave, struct net_device *master)
{
struct frad_local *flp;
int i;
@@ -549,7 +549,7 @@
return(0);
}
-int sdla_assoc(struct net_device *slave, struct net_device *master)
+static int sdla_assoc(struct net_device *slave, struct net_device *master)
{
struct frad_local *flp;
int i;
@@ -585,7 +585,7 @@
return(0);
}
-int sdla_deassoc(struct net_device *slave, struct net_device *master)
+static int sdla_deassoc(struct net_device *slave, struct net_device *master)
{
struct frad_local *flp;
int i;
@@ -613,7 +613,7 @@
return(0);
}
-int sdla_dlci_conf(struct net_device *slave, struct net_device *master, int get)
+static int sdla_dlci_conf(struct net_device *slave, struct net_device *master, int get)
{
struct frad_local *flp;
struct dlci_local *dlp;
@@ -1324,7 +1324,7 @@
return(0);
}
-int sdla_change_mtu(struct net_device *dev, int new_mtu)
+static int sdla_change_mtu(struct net_device *dev, int new_mtu)
{
struct frad_local *flp;
@@ -1337,7 +1337,7 @@
return(-EOPNOTSUPP);
}
-int sdla_set_config(struct net_device *dev, struct ifmap *map)
+static int sdla_set_config(struct net_device *dev, struct ifmap *map)
{
struct frad_local *flp;
int i;
--- linux-2.6.11-rc3-mm2-full/include/linux/sdladrv.h.old 2005-02-17 00:18:15.000000000 +0100
+++ linux-2.6.11-rc3-mm2-full/include/linux/sdladrv.h 2005-02-17 00:19:47.000000000 +0100
@@ -52,12 +52,8 @@
extern int sdla_setup (sdlahw_t* hw, void* sfm, unsigned len);
extern int sdla_down (sdlahw_t* hw);
-extern int sdla_inten (sdlahw_t* hw);
-extern int sdla_intde (sdlahw_t* hw);
-extern int sdla_intack (sdlahw_t* hw);
extern void S514_intack (sdlahw_t* hw, u32 int_status);
extern void read_S514_int_stat (sdlahw_t* hw, u32* int_status);
-extern int sdla_intr (sdlahw_t* hw);
extern int sdla_mapmem (sdlahw_t* hw, unsigned long addr);
extern int sdla_peek (sdlahw_t* hw, unsigned long addr, void* buf,
unsigned len);
--- linux-2.6.11-rc3-mm2-full/drivers/net/wan/sdladrv.c.old 2005-02-17 00:18:30.000000000 +0100
+++ linux-2.6.11-rc3-mm2-full/drivers/net/wan/sdladrv.c 2005-02-17 00:20:04.000000000 +0100
@@ -642,9 +642,7 @@
* Enable interrupt generation.
*/
-EXPORT_SYMBOL(sdla_inten);
-
-int sdla_inten (sdlahw_t* hw)
+static int sdla_inten (sdlahw_t* hw)
{
unsigned port = hw->port;
int tmp, i;
@@ -698,8 +696,7 @@
* Disable interrupt generation.
*/
-EXPORT_SYMBOL(sdla_intde);
-
+#if 0
int sdla_intde (sdlahw_t* hw)
{
unsigned port = hw->port;
@@ -748,14 +745,13 @@
}
return 0;
}
+#endif /* 0 */
/*============================================================================
* Acknowledge SDLA hardware interrupt.
*/
-EXPORT_SYMBOL(sdla_intack);
-
-int sdla_intack (sdlahw_t* hw)
+static int sdla_intack (sdlahw_t* hw)
{
unsigned port = hw->port;
int tmp;
@@ -827,8 +823,7 @@
* Generate an interrupt to adapter's CPU.
*/
-EXPORT_SYMBOL(sdla_intr);
-
+#if 0
int sdla_intr (sdlahw_t* hw)
{
unsigned port = hw->port;
@@ -863,6 +858,7 @@
}
return 0;
}
+#endif /* 0 */
/*============================================================================
* Execute Adapter Command.
--- linux-2.6.11-rc3-mm2-full/include/net/syncppp.h.old 2005-02-17 00:20:19.000000000 +0100
+++ linux-2.6.11-rc3-mm2-full/include/net/syncppp.h 2005-02-17 00:20:25.000000000 +0100
@@ -86,7 +86,6 @@
void sppp_attach (struct ppp_device *pd);
void sppp_detach (struct net_device *dev);
-void sppp_input (struct net_device *dev, struct sk_buff *m);
int sppp_do_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd);
struct sk_buff *sppp_dequeue (struct net_device *dev);
int sppp_isempty (struct net_device *dev);
--- linux-2.6.11-rc3-mm2-full/drivers/net/wan/syncppp.c.old 2005-02-17 00:20:36.000000000 +0100
+++ linux-2.6.11-rc3-mm2-full/drivers/net/wan/syncppp.c 2005-02-17 00:21:37.000000000 +0100
@@ -221,7 +221,7 @@
* here.
*/
-void sppp_input (struct net_device *dev, struct sk_buff *skb)
+static void sppp_input (struct net_device *dev, struct sk_buff *skb)
{
struct ppp_header *h;
struct sppp *sp = (struct sppp *)sppp_of(dev);
@@ -355,8 +355,6 @@
return;
}
-EXPORT_SYMBOL(sppp_input);
-
/*
* Handle transmit packets.
*/
@@ -990,7 +988,7 @@
* the mtu is out of range.
*/
-int sppp_change_mtu(struct net_device *dev, int new_mtu)
+static int sppp_change_mtu(struct net_device *dev, int new_mtu)
{
if(new_mtu<128||new_mtu>PPP_MTU||(dev->flags&IFF_UP))
return -EINVAL;
@@ -998,8 +996,6 @@
return 0;
}
-EXPORT_SYMBOL(sppp_change_mtu);
-
/**
* sppp_do_ioctl - Ioctl handler for ppp/hdlc
* @dev: Device subject to ioctl
@@ -1455,7 +1451,7 @@
return 0;
}
-struct packet_type sppp_packet_type = {
+static struct packet_type sppp_packet_type = {
.type = __constant_htons(ETH_P_WAN_PPP),
.func = sppp_rcv,
};
--- linux-2.6.11-rc3-mm2-full/drivers/net/wan/z85230.c.old 2005-02-17 00:21:58.000000000 +0100
+++ linux-2.6.11-rc3-mm2-full/drivers/net/wan/z85230.c 2005-02-17 00:22:31.000000000 +0100
@@ -621,24 +621,20 @@
spin_unlock(chan->lock);
}
-struct z8530_irqhandler z8530_dma_sync=
+static struct z8530_irqhandler z8530_dma_sync =
{
z8530_dma_rx,
z8530_dma_tx,
z8530_dma_status
};
-EXPORT_SYMBOL(z8530_dma_sync);
-
-struct z8530_irqhandler z8530_txdma_sync=
+static struct z8530_irqhandler z8530_txdma_sync =
{
z8530_rx,
z8530_dma_tx,
z8530_dma_status
};
-EXPORT_SYMBOL(z8530_txdma_sync);
-
/**
* z8530_rx_clear - Handle RX events from a stopped chip
* @c: Z8530 channel to shut up
next reply other threads:[~2005-03-27 14:57 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-03-27 14:34 Adrian Bunk [this message]
2005-03-27 16:38 ` [2.6 patch] drivers/net/wan/: possible cleanups Alan Cox
2005-04-14 23:20 ` Adrian Bunk
2005-04-15 17:49 ` Alan Cox
2005-04-17 23:47 ` Adrian Bunk
2005-04-18 12:55 ` Alan Cox
2005-04-18 21:44 ` Adrian Bunk
-- strict thread matches above, loose matches on Subject: below --
2005-09-02 1:23 Adrian Bunk
2005-05-31 0:58 Adrian Bunk
2005-03-11 18:16 Adrian Bunk
2005-03-22 23:52 ` Jeff Garzik
2005-02-19 8:50 Adrian Bunk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050327143418.GE4285@stusta.de \
--to=bunk@stusta.de \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.