Re: [patch] sched: auto-tune migration costs [was: Re: Industry db benchmark result on recent 2.6 kernels]

[Ingo Molnar <mingo@elte.hu>]

[-- Attachment #1: Type: text/plain, Size: 653 bytes --]


latest patch attached. Changes:

 - stabilized calibration even more, by using cache flushing 
   instructions to generate a predictable working set. The cache 
   flushing itself is not timed, it is used to create quiescent
   cache  state.

   I only guessed the ia64 version - e.g. i didnt know what 'type' 
   argument to pass to ia64_sal_cache_flush() to get a d/cache 
   flush+invalidate. Same for ppc/ppc64 - i only guessed the function
   in question but didnt test it.

 - due to more stable results, reduced ITERATIONS from 3 to 2 - this 
   should further speed up calibration.

tested on x86, the calibration results look ok there.

	Ingo

[-- Attachment #2: cache-hot-autodetect.patch --]
[-- Type: text/plain, Size: 18775 bytes --]

--- linux/kernel/sched.c.orig
+++ linux/kernel/sched.c
@@ -47,6 +47,7 @@
 #include <linux/syscalls.h>
 #include <linux/times.h>
 #include <linux/acct.h>
+#include <linux/vmalloc.h>
 #include <asm/tlb.h>
 
 #include <asm/unistd.h>
@@ -4640,6 +4641,506 @@ void __devinit init_sched_build_groups(s
 }
 
 
+/*
+ * Self-tuning task migration cost measurement between source and target CPUs.
+ *
+ * This is done by measuring the cost of manipulating buffers of varying
+ * sizes. For a given buffer-size here are the steps that are taken:
+ *
+ * 1) the source CPU reads+dirties a shared buffer 
+ * 2) the target CPU reads+dirties the same shared buffer
+ *
+ * We measure how long they take, in the following 4 scenarios:
+ *
+ *  - source: CPU1, target: CPU2 | cost1
+ *  - source: CPU2, target: CPU1 | cost2
+ *  - source: CPU1, target: CPU1 | cost3
+ *  - source: CPU2, target: CPU2 | cost4
+ *
+ * We then calculate the cost3+cost4-cost1-cost2 difference - this is
+ * the cost of migration.
+ *
+ * We then start off from a small buffer-size and iterate up to larger
+ * buffer sizes, in 5% steps - measuring each buffer-size separately, and
+ * doing a maximum search for the cost. (The maximum cost for a migration
+ * normally occurs when the working set size is around the effective cache
+ * size.)
+ */
+#define SEARCH_SCOPE		2
+#define MIN_CACHE_SIZE		(64*1024U)
+#define DEFAULT_CACHE_SIZE	(5*1024*1024U)
+#define ITERATIONS		2
+#define SIZE_THRESH		130
+#define COST_THRESH		130
+
+/*
+ * The migration cost is a function of 'domain distance'. Domain
+ * distance is the number of steps a CPU has to iterate down its
+ * domain tree to share a domain with the other CPU. The farther
+ * two CPUs are from each other, the larger the distance gets.
+ *
+ * Note that we use the distance only to cache measurement results,
+ * the distance value is not used numerically otherwise. When two
+ * CPUs have the same distance it is assumed that the migration
+ * cost is the same. (this is a simplification but quite practical)
+ */
+#define MAX_DOMAIN_DISTANCE 32
+
+static __initdata unsigned long long migration_cost[MAX_DOMAIN_DISTANCE] =
+		{ [ 0 ... MAX_DOMAIN_DISTANCE-1 ] = -1LL };
+
+/*
+ * Allow override of migration cost - in units of microseconds.
+ * E.g. migration_cost=1000,2000,3000 will set up a level-1 cost
+ * of 1 msec, level-2 cost of 2 msecs and level3 cost of 3 msecs:
+ */
+static int __init migration_cost_setup(char *str)
+{
+	int ints[MAX_DOMAIN_DISTANCE+1], i;
+
+	str = get_options(str, ARRAY_SIZE(ints), ints);
+
+	printk("#ints: %d\n", ints[0]);
+	for (i = 1; i <= ints[0]; i++) {
+		migration_cost[i-1] = (unsigned long long)ints[i]*1000;
+		printk("migration_cost[%d]: %Ld\n", i-1, migration_cost[i-1]);
+	}
+	return 1;
+}
+
+__setup ("migration_cost=", migration_cost_setup);
+
+/*
+ * Global multiplier (divisor) for migration-cutoff values,
+ * in percentiles. E.g. use a value of 150 to get 1.5 times
+ * longer cache-hot cutoff times.
+ *
+ * (We scale it from 100 to 128 to long long handling easier.)
+ */
+
+#define MIGRATION_FACTOR_SCALE 128
+
+static __initdata unsigned int migration_factor = MIGRATION_FACTOR_SCALE;
+
+static int __init setup_migration_factor(char *str)
+{
+	get_option(&str, &migration_factor);
+	migration_factor = migration_factor * MIGRATION_FACTOR_SCALE / 100;
+	return 1;
+}
+
+__setup("migration_factor=", setup_migration_factor);
+
+/*
+ * Estimated distance of two CPUs, measured via the number of domains
+ * we have to pass for the two CPUs to be in the same span:
+ */
+__init static unsigned long domain_distance(int cpu1, int cpu2)
+{
+	unsigned long distance = 0;
+	struct sched_domain *sd;
+
+	for_each_domain(cpu1, sd) {
+		WARN_ON(!cpu_isset(cpu1, sd->span));
+		if (cpu_isset(cpu2, sd->span))
+			return distance;
+		distance++;
+	}
+	if (distance >= MAX_DOMAIN_DISTANCE) {
+		WARN_ON(1);
+		distance = MAX_DOMAIN_DISTANCE-1;
+	}
+
+	return distance;
+}
+
+static __initdata unsigned int migration_debug = 1;
+
+static int __init setup_migration_debug(char *str)
+{
+	get_option(&str, &migration_debug);
+	return 1;
+}
+
+__setup("migration_debug=", setup_migration_debug);
+
+/*
+ * Maximum cache-size that the scheduler should try to measure.
+ * Architectures with larger caches should tune this up during
+ * bootup. Gets used in the domain-setup code (i.e. during SMP
+ * bootup).
+ */
+__initdata unsigned int max_cache_size;
+
+static int __init setup_max_cache_size(char *str)
+{
+	get_option(&str, &max_cache_size);
+	return 1;
+}
+
+__setup("max_cache_size=", setup_max_cache_size);
+
+/*
+ * Dirty a big buffer in a hard-to-predict (for the L2 cache) way. This
+ * is the operation that is timed, so we try to generate unpredictable
+ * cachemisses that still end up filling the L2 cache:
+ */
+__init static void touch_cache(void *__cache, unsigned long __size)
+{
+	unsigned long size = __size/sizeof(long), chunk1 = size/3,
+			chunk2 = 2*size/3;
+	unsigned long *cache = __cache;
+	int i;
+
+	for (i = 0; i < size/6; i += 8) {
+		switch (i % 6) {
+			case 0: cache[i]++;
+			case 1: cache[size-1-i]++;
+			case 2: cache[chunk1-i]++;
+			case 3: cache[chunk1+i]++;
+			case 4: cache[chunk2-i]++;
+			case 5: cache[chunk2+i]++;
+		}
+	}
+}
+
+// FIXME: move sched_cacheflush into arch include files:
+
+#ifdef CONFIG_IA64
+# include <asm/sal.h>
+#endif
+
+__init static void sched_cacheflush(void)
+{
+#ifdef CONFIG_X86
+	asm ("wbinvd");
+#elif defined(CONFIG_IA64)
+	ia64_sal_cache_flush(1); // what argument does d/cache flush?
+#elif defined(CONFIG_PPC64) || defined(CONFIG_PPC)
+	cacheflush();
+#else
+# warning implement sched_cacheflush()! Calibration results may be unreliable.
+#endif
+}
+
+/*
+ * Measure the cache-cost of one task migration. Returns in units of nsec.
+ */
+__init static unsigned long long measure_one(void *cache, unsigned long size,
+					     int source, int target)
+{
+	cpumask_t mask, saved_mask;
+	unsigned long long t0, t1, t2, t3, cost;
+
+	saved_mask = current->cpus_allowed;
+
+	/*
+	 * Flush source caches to RAM and invalidate them:
+	 */
+	sched_cacheflush();
+
+	/*
+	 * Migrate to the source CPU:
+	 */
+	mask = cpumask_of_cpu(source);
+	set_cpus_allowed(current, mask);
+	WARN_ON(smp_processor_id() != source);
+
+	/*
+	 * Dirty the working set:
+	 */
+	t0 = sched_clock();
+	touch_cache(cache, size);
+	t1 = sched_clock();
+
+	/*
+	 * Migrate to the target CPU, dirty the L2 cache and access
+	 * the shared buffer. (which represents the working set
+	 * of a migrated task.)
+	 */
+	mask = cpumask_of_cpu(target);
+	set_cpus_allowed(current, mask);
+	WARN_ON(smp_processor_id() != target);
+
+	t2 = sched_clock();
+	touch_cache(cache, size);
+	t3 = sched_clock();
+
+	cost = t1-t0 + t3-t2;
+
+	if (migration_debug >= 2)
+		printk("[%d->%d]: %8Ld %8Ld %8Ld => %10Ld.\n",
+			source, target, t1-t0, t1-t0, t3-t2, cost);
+	/*
+	 * Flush target caches to RAM and invalidate them:
+	 */
+	sched_cacheflush();
+
+	set_cpus_allowed(current, saved_mask);
+
+	return cost;
+}
+
+/*
+ * Measure a series of task migrations and return the average
+ * result. Since this code runs early during bootup the system
+ * is 'undisturbed' and the average latency makes sense.
+ *
+ * The algorithm in essence auto-detects the relevant cache-size,
+ * so it will properly detect different cachesizes for different
+ * cache-hierarchies, depending on how the CPUs are connected.
+ *
+ * Architectures can prime the upper limit of the search range via
+ * max_cache_size, otherwise the search range defaults to 20MB...64K.
+ */
+__init static unsigned long long
+measure_cost(int cpu1, int cpu2, void *cache, unsigned int size)
+{
+	unsigned long long cost1, cost2;
+	int i;
+
+	/*
+	 * Measure the migration cost of 'size' bytes, over an
+	 * average of 10 runs:
+	 *
+	 * (We perturb the cache size by a small (0..4k)
+	 *  value to compensate size/alignment related artifacts.
+	 *  We also subtract the cost of the operation done on
+	 *  the same CPU.)
+	 */
+	cost1 = 0;
+
+	/*
+	 * dry run, to make sure we start off cache-cold on cpu1,
+	 * and to get any vmalloc pagefaults in advance:
+	 */
+	measure_one(cache, size, cpu1, cpu2);
+	for (i = 0; i < ITERATIONS; i++)
+		cost1 += measure_one(cache, size - i*1024, cpu1, cpu2);
+
+	measure_one(cache, size, cpu2, cpu1);
+	for (i = 0; i < ITERATIONS; i++)
+		cost1 += measure_one(cache, size - i*1024, cpu2, cpu1);
+
+	/*
+	 * (We measure the non-migrating [cached] cost on both
+	 *  cpu1 and cpu2, to handle CPUs with different speeds)
+	 */
+	cost2 = 0;
+
+	measure_one(cache, size, cpu1, cpu1);
+	for (i = 0; i < ITERATIONS; i++)
+		cost2 += measure_one(cache, size - i*1024, cpu1, cpu1);
+
+	measure_one(cache, size, cpu2, cpu2);
+	for (i = 0; i < ITERATIONS; i++)
+		cost2 += measure_one(cache, size - i*1024, cpu2, cpu2);
+
+	/*
+	 * Get the per-iteration migration cost:
+	 */
+	do_div(cost1, 2*ITERATIONS);
+	do_div(cost2, 2*ITERATIONS);
+
+	return cost1 - cost2;
+}
+
+__init static unsigned long long measure_migration_cost(int cpu1, int cpu2)
+{
+	unsigned long long max_cost = 0, fluct = 0, avg_fluct = 0;
+	unsigned int max_size, size, size_found = 0;
+	long long cost = 0, prev_cost;
+	void *cache;
+
+	/*
+	 * Search from max_cache_size*5 down to 64K - the real relevant
+	 * cachesize has to lie somewhere inbetween.
+	 */
+	if (max_cache_size) {
+		max_size = max(max_cache_size * SEARCH_SCOPE, MIN_CACHE_SIZE);
+		size = max(max_cache_size / SEARCH_SCOPE, MIN_CACHE_SIZE);
+	} else {
+		/*
+		 * Since we have no estimation about the relevant
+		 * search range
+		 */
+		max_size = DEFAULT_CACHE_SIZE * SEARCH_SCOPE;
+		size = MIN_CACHE_SIZE;
+	}
+		
+	if (!cpu_online(cpu1) || !cpu_online(cpu2)) {
+		printk("cpu %d and %d not both online!\n", cpu1, cpu2);
+		return 0;
+	}
+
+	/*
+	 * Allocate the working set:
+	 */
+	cache = vmalloc(max_size);
+	if (!cache) {
+		printk("could not vmalloc %d bytes for cache!\n", 2*max_size);
+		return 1000000; // return 1 msec on very small boxen
+	}
+
+	while (size <= max_size) {
+		prev_cost = cost;
+		cost = measure_cost(cpu1, cpu2, cache, size);
+
+		/*
+		 * Update the max:
+		 */
+		if (cost > 0) {
+			if (max_cost < cost) {
+				max_cost = cost;
+				size_found = size;
+			}
+		}
+		/*
+		 * Calculate average fluctuation, we use this to prevent
+		 * noise from triggering an early break out of the loop:
+		 */
+		fluct = abs(cost - prev_cost);
+		avg_fluct = (avg_fluct + fluct)/2;
+
+		if (migration_debug)
+			printk("-> [%d][%d][%7d] %3ld.%ld [%3ld.%ld] (%ld): (%8Ld %8Ld)\n",
+				cpu1, cpu2, size,
+				(long)cost / 1000000,
+				((long)cost / 100000) % 10,
+				(long)max_cost / 1000000,
+				((long)max_cost / 100000) % 10,
+				domain_distance(cpu1, cpu2),
+				cost, avg_fluct);
+
+		/*
+		 * If we iterated at least 20% past the previous maximum,
+		 * and the cost has dropped by more than 20% already,
+		 * (taking fluctuations into account) then we assume to
+		 * have found the maximum and break out of the loop early:
+		 */
+		if (size_found && (size*100 > size_found*SIZE_THRESH))
+			if (cost+avg_fluct <= 0 ||
+				max_cost*100 > (cost+avg_fluct)*COST_THRESH) {
+
+				if (migration_debug)
+					printk("-> found max.\n");
+				break;
+			}
+		/*
+		 * Increase the cachesize in 5% steps:
+		 */
+		size = size * 20 / 19;
+	}
+
+	if (migration_debug)
+		printk("[%d][%d] working set size found: %d, cost: %Ld\n",
+			cpu1, cpu2, size_found, max_cost);
+
+	vfree(cache);
+
+	/*
+	 * A task is considered 'cache cold' if at least 2 times
+	 * the worst-case cost of migration has passed.
+	 *
+	 * (this limit is only listened to if the load-balancing
+	 * situation is 'nice' - if there is a large imbalance we
+	 * ignore it for the sake of CPU utilization and
+	 * processing fairness.)
+	 */
+	return 2 * max_cost * migration_factor / MIGRATION_FACTOR_SCALE;
+}
+
+void __devinit calibrate_migration_costs(void)
+{
+	int cpu1 = -1, cpu2 = -1, cpu;
+	struct sched_domain *sd;
+	unsigned long distance, max_distance = 0;
+	unsigned long long cost;
+	unsigned long flags, j0, j1;
+
+	local_irq_save(flags);
+	local_irq_enable();
+	j0 = jiffies;
+
+	/*
+	 * First pass - calculate the cacheflush times:
+	 */
+	for_each_online_cpu(cpu1) {
+		for_each_online_cpu(cpu2) {
+			if (cpu1 == cpu2)
+				continue;
+			distance = domain_distance(cpu1, cpu2);
+			max_distance = max(max_distance, distance);
+			/*
+			 * Do we have the result cached already?
+			 */
+			if (migration_cost[distance] != -1LL)
+				cost = migration_cost[distance];
+			else {
+				cost = measure_migration_cost(cpu1, cpu2);
+				migration_cost[distance] = cost;
+			}
+		}
+	}
+	/*
+	 * Second pass - update the sched domain hierarchy with
+	 * the new cache-hot-time estimations:
+	 */
+	for_each_online_cpu(cpu) {
+		distance = 0;
+		for_each_domain(cpu, sd) {
+			sd->cache_hot_time = migration_cost[distance];
+			distance++;
+		}
+	}
+	/*
+	 * Print the matrix:
+	 */
+	printk("---------------------\n");
+	printk("| migration cost matrix (max_cache_size: %d, cpu: %ld MHz):\n",
+			max_cache_size,
+#ifdef CONFIG_X86
+			cpu_khz/1000
+#else
+			-1L
+#endif
+		);
+	printk("---------------------\n");
+	printk("      ");
+	for_each_online_cpu(cpu1)
+		printk("    [%02d]", cpu1);
+	printk("\n");
+	for_each_online_cpu(cpu1) {
+		printk("[%02d]: ", cpu1);
+		for_each_online_cpu(cpu2) {
+			if (cpu1 == cpu2) {
+				printk("    -   ");
+				continue;
+			}
+			distance = domain_distance(cpu1, cpu2);
+			max_distance = max(max_distance, distance);
+			cost = migration_cost[distance];
+			printk(" %2ld.%ld(%ld)", (long)cost / 1000000,
+				((long)cost / 100000) % 10, distance);
+		}
+		printk("\n");
+	}
+	printk("--------------------------------\n");
+	printk("| cacheflush times [%ld]:", max_distance+1);
+	for (distance = 0; distance <= max_distance; distance++) {
+		cost = migration_cost[distance];
+		printk(" %ld.%ld (%Ld)", (long)cost / 1000000,
+			((long)cost / 100000) % 10, cost);
+	}
+	printk("\n");
+	j1 = jiffies;
+	printk("| calibration delay: %ld seconds\n", (j1-j0)/HZ);
+	printk("--------------------------------\n");
+
+	local_irq_restore(flags);
+}
+
+
 #ifdef ARCH_HAS_SCHED_DOMAIN
 extern void __devinit arch_init_sched_domains(void);
 extern void __devinit arch_destroy_sched_domains(void);
@@ -4820,6 +5321,10 @@ static void __devinit arch_init_sched_do
 #endif
 		cpu_attach_domain(sd, i);
 	}
+	/*
+	 * Tune cache-hot values:
+	 */
+	calibrate_migration_costs();
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
--- linux/arch/ia64/kernel/domain.c.orig
+++ linux/arch/ia64/kernel/domain.c
@@ -358,6 +358,10 @@ next_sg:
 #endif
 		cpu_attach_domain(sd, i);
 	}
+	/*
+	 * Tune cache-hot values:
+	 */
+	calibrate_migration_costs();
 }
 
 void __devinit arch_destroy_sched_domains(void)
--- linux/arch/ia64/kernel/setup.c.orig
+++ linux/arch/ia64/kernel/setup.c
@@ -561,6 +561,7 @@ static void
 get_max_cacheline_size (void)
 {
 	unsigned long line_size, max = 1;
+	unsigned int cache_size = 0;
 	u64 l, levels, unique_caches;
         pal_cache_config_info_t cci;
         s64 status;
@@ -585,8 +586,11 @@ get_max_cacheline_size (void)
 		line_size = 1 << cci.pcci_line_size;
 		if (line_size > max)
 			max = line_size;
+		if (cache_size < cci.pcci_cache_size)
+			cache_size = cci.pcci_cache_size;
         }
   out:
+	max_cache_size = max(max_cache_size, cache_size);
 	if (max > ia64_max_cacheline_size)
 		ia64_max_cacheline_size = max;
 }
--- linux/arch/i386/kernel/smpboot.c.orig
+++ linux/arch/i386/kernel/smpboot.c
@@ -873,6 +873,7 @@ static void smp_tune_scheduling (void)
 			cachesize = 16; /* Pentiums, 2x8kB cache */
 			bandwidth = 100;
 		}
+		max_cache_size = cachesize * 1024;
 	}
 }
 
--- linux/include/asm-ia64/topology.h.orig
+++ linux/include/asm-ia64/topology.h
@@ -51,7 +51,6 @@ void build_cpu_to_node_map(void);
 	.max_interval		= 320,			\
 	.busy_factor		= 320,			\
 	.imbalance_pct		= 125,			\
-	.cache_hot_time		= (10*1000000),		\
 	.cache_nice_tries	= 1,			\
 	.per_cpu_gain		= 100,			\
 	.flags			= SD_LOAD_BALANCE	\
@@ -73,7 +72,6 @@ void build_cpu_to_node_map(void);
 	.max_interval		= 320,			\
 	.busy_factor		= 320,			\
 	.imbalance_pct		= 125,			\
-	.cache_hot_time		= (10*1000000),		\
 	.cache_nice_tries	= 1,			\
 	.per_cpu_gain		= 100,			\
 	.flags			= SD_LOAD_BALANCE	\
--- linux/include/linux/topology.h.orig
+++ linux/include/linux/topology.h
@@ -86,7 +86,6 @@
 	.max_interval		= 2,			\
 	.busy_factor		= 8,			\
 	.imbalance_pct		= 110,			\
-	.cache_hot_time		= 0,			\
 	.cache_nice_tries	= 0,			\
 	.per_cpu_gain		= 25,			\
 	.flags			= SD_LOAD_BALANCE	\
@@ -112,7 +111,6 @@
 	.max_interval		= 4,			\
 	.busy_factor		= 64,			\
 	.imbalance_pct		= 125,			\
-	.cache_hot_time		= (5*1000000/2),	\
 	.cache_nice_tries	= 1,			\
 	.per_cpu_gain		= 100,			\
 	.flags			= SD_LOAD_BALANCE	\
--- linux/include/linux/sched.h.orig
+++ linux/include/linux/sched.h
@@ -527,7 +527,17 @@ extern cpumask_t cpu_isolated_map;
 extern void init_sched_build_groups(struct sched_group groups[],
 	                        cpumask_t span, int (*group_fn)(int cpu));
 extern void cpu_attach_domain(struct sched_domain *sd, int cpu);
+
 #endif /* ARCH_HAS_SCHED_DOMAIN */
+
+/*
+ * Maximum cache size the migration-costs auto-tuning code will
+ * search from:
+ */
+extern unsigned int max_cache_size;
+
+extern void calibrate_migration_costs(void);
+
 #endif /* CONFIG_SMP */
 
 
--- linux/include/asm-i386/topology.h.orig
+++ linux/include/asm-i386/topology.h
@@ -75,7 +75,6 @@ static inline cpumask_t pcibus_to_cpumas
 	.max_interval		= 32,			\
 	.busy_factor		= 32,			\
 	.imbalance_pct		= 125,			\
-	.cache_hot_time		= (10*1000000),		\
 	.cache_nice_tries	= 1,			\
 	.per_cpu_gain		= 100,			\
 	.flags			= SD_LOAD_BALANCE	\
--- linux/include/asm-ppc64/topology.h.orig
+++ linux/include/asm-ppc64/topology.h
@@ -46,7 +46,6 @@ static inline int node_to_first_cpu(int 
 	.max_interval		= 32,			\
 	.busy_factor		= 32,			\
 	.imbalance_pct		= 125,			\
-	.cache_hot_time		= (10*1000000),		\
 	.cache_nice_tries	= 1,			\
 	.per_cpu_gain		= 100,			\
 	.flags			= SD_LOAD_BALANCE	\
--- linux/include/asm-x86_64/topology.h.orig
+++ linux/include/asm-x86_64/topology.h
@@ -48,7 +48,6 @@ static inline cpumask_t __pcibus_to_cpum
 	.max_interval		= 32,			\
 	.busy_factor		= 32,			\
 	.imbalance_pct		= 125,			\
-	.cache_hot_time		= (10*1000000),		\
 	.cache_nice_tries	= 1,			\
 	.per_cpu_gain		= 100,			\
 	.flags			= SD_LOAD_BALANCE	\
--- linux/include/asm-mips/mach-ip27/topology.h.orig
+++ linux/include/asm-mips/mach-ip27/topology.h
@@ -24,7 +24,6 @@ extern unsigned char __node_distances[MA
 	.max_interval		= 32,			\
 	.busy_factor		= 32,			\
 	.imbalance_pct		= 125,			\
-	.cache_hot_time		= (10*1000),		\
 	.cache_nice_tries	= 1,			\
 	.per_cpu_gain		= 100,			\
 	.flags			= SD_LOAD_BALANCE	\