From: Andrew Morton <akpm@osdl.org>
To: linux-fbdev-devel@lists.sourceforge.net
Cc: klug@blarg.org
Subject: Fw: [Bugme-new] [Bug 4468] New: Upgrade to 2.6.11.6 results in no longer being able to turn the lcd backlight off.
Date: Sun, 10 Apr 2005 17:28:43 -0700 [thread overview]
Message-ID: <20050410172843.6366ef8a.akpm@osdl.org> (raw)
Can you test 2.6.12-rc2 please?
Begin forwarded message:
Date: Sun, 10 Apr 2005 17:25:49 -0700
From: bugme-daemon@osdl.org
To: bugme-new@lists.osdl.org
Subject: [Bugme-new] [Bug 4468] New: Upgrade to 2.6.11.6 results in no longer being able to turn the lcd backlight off.
http://bugme.osdl.org/show_bug.cgi?id=4468
Summary: Upgrade to 2.6.11.6 results in no longer being able to
turn the lcd backlight off.
Kernel Version: 2.6.11.6
Status: NEW
Severity: normal
Owner: acpi_other@kernel-bugs.osdl.org
Submitter: klug@blarg.org
Distribution:
Gentoo 2005.0
Hardware Environment:
Toshiba Satellite 5005-S507
lspci -vvv
0000:00:00.0 Host bridge: Intel Corporation 82815 815 Chipset Host Bridge and
Memory Controller Hub (rev 04)
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at f8000000 (32-bit, prefetchable)
Capabilities: [88] #09 [e104]
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3-
Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW- Rate=x4
0000:00:01.0 PCI bridge: Intel Corporation 82815 815 Chipset AGP Bridge (rev 04)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fd000000-fdffffff
Prefetchable memory behind bridge: eff00000-f7ffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 05) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=02, subordinate=04, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fce00000-fcefffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
0000:00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 05)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
0000:00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 (rev 05) (prog-if
80 [Master])
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Region 4: I/O ports at cff0 [size=16]
0000:00:1f.2 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #1) (rev 05)
(prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at cf80 [size=32]
0000:00:1f.4 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #2) (rev 05)
(prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 10
Region 4: I/O ports at 1000 [size=32]
0000:00:1f.5 Multimedia audio controller: Intel Corporation 82801BA/BAM AC'97
Audio (rev 05)
Subsystem: Toshiba America Info Systems: Unknown device 0002
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 10
Region 0: I/O ports at 1400
Region 1: I/O ports at 1040 [size=64]
0000:00:1f.6 Modem: Intel Corporation 82801BA/BAM AC'97 Modem (rev 05) (prog-if
00 [Generic])
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 255
Region 0: I/O ports at 1800 [disabled]
Region 1: I/O ports at 1080 [disabled] [size=128]
0000:01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 440
Go] (rev a3) (prog-if 00 [VGA])
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at fd000000 (32-bit, non-prefetchable)
Region 1: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 2: Memory at eff80000 (32-bit, prefetchable) [size=512K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans- 64bit- FW+ AGP3-
Rate=x1,x2,x4
Command: RQ=32 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW- Rate=x4
0000:02:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000
Controller (PHY/Link) (prog-if 10 [OHCI])
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 255
Region 0: Memory at 20000000 (32-bit, non-prefetchable) [disabled]
Region 1: Memory at 20004000 (32-bit, non-prefetchable) [disabled] [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D3 PME-Enable- DSel=0 DScale=0 PME-
0000:02:08.0 Ethernet controller: Intel Corporation 82801BA/BAM/CA/CAM Ethernet
Controller (rev 03)
Subsystem: Toshiba America Info Systems PRO/100 VE Network Connection
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (2000ns min, 14000ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fceff000 (32-bit, non-prefetchable)
Region 1: I/O ports at df40 [size=64]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
0000:02:0b.0 CardBus bridge: Toshiba America Info Systems ToPIC100 PCI to
Cardbus Bridge with ZV Support (rev 32)
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 255
Region 0: Memory at 20001000 (32-bit, non-prefetchable) [disabled]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=0
Memory window 0: 00000000-00000000 [disabled]
Memory window 1: 00000000-00000000 [disabled]
I/O window 0: 00000000-00000003 [disabled]
I/O window 1: 00000000-00000003 [disabled]
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite-
16-bit legacy interface ports at 0001
0000:02:0b.1 CardBus bridge: Toshiba America Info Systems ToPIC100 PCI to
Cardbus Bridge with ZV Support (rev 32)
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 255
Region 0: Memory at 20002000 (32-bit, non-prefetchable) [disabled]
Bus: primary=02, secondary=07, subordinate=0a, sec-latency=0
Memory window 0: 00000000-00000000 [disabled]
Memory window 1: 00000000-00000000 [disabled]
I/O window 0: 00000000-00000003 [disabled]
I/O window 1: 00000000-00000003 [disabled]
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite-
16-bit legacy interface ports at 0001
0000:02:0c.0 System peripheral: Toshiba America Info Systems TC6371AF SmartMedia
Controller (rev 03)
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 255
Region 0: Memory at 20000800 (32-bit, non-prefetchable) [disabled]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D3 PME-Enable- DSel=0 DScale=0 PME-
0000:02:0d.0 System peripheral: Toshiba America Info Systems SD TypA Controller
(rev 03)
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 255
Region 0: Memory at 20000a00 (32-bit, non-prefetchable) [disabled]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D3 PME-Enable- DSel=0 DScale=0 PME-
/proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 10
cpu MHz : 1096.759
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx
fxsr sse
bogomips : 2170.88
/proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
03c0-03df : vesafb
03f6-03f6 : ide0
0cf8-0cff : PCI conf1
1000-101f : 0000:00:1f.4
1000-101f : uhci_hcd
1040-107f : 0000:00:1f.5
1040-107f : Intel 82801BA-ICH2
1080-10ff : 0000:00:1f.6
1400-14ff : 0000:00:1f.5
1400-14ff : Intel 82801BA-ICH2
1800-18ff : 0000:00:1f.6
cf80-cf9f : 0000:00:1f.2
cf80-cf9f : uhci_hcd
cff0-cfff : 0000:00:1f.1
cff0-cff7 : ide0
cff8-cfff : ide1
df40-df7f : 0000:02:08.0
df40-df7f : eepro100
e000-e07f : motherboard
e080-e0ff : motherboard
e400-e47f : motherboard
e480-e4ff : motherboard
e800-e87f : motherboard
e880-e8ff : motherboard
ec00-ec7f : motherboard
ec80-ecff : motherboard
ee00-ee7f : 0000:00:1f.0
ee00-ee7f : motherboard
ee00-ee03 : PM1a_EVT_BLK
ee04-ee05 : PM1a_CNT_BLK
ee08-ee0b : PM_TMR
ee10-ee15 : ACPI CPU throttle
ee20-ee20 : PM2_CNT_BLK
ee28-ee2b : GPE0_BLK
ee80-ee8f : motherboard
ee90-ee9f : motherboard
eeac-eeac : motherboard
eec0-eeff : 0000:00:1f.0
eec0-eeff : motherboard
/proc/iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000cffff : Video ROM
000e0000-000eedff : reserved
000eee00-000eefff : ACPI Non-volatile Storage
000f0000-000fffff : System ROM
00100000-1ffeffff : System RAM
00100000-0033ac75 : Kernel code
0033ac76-00411d5f : Kernel data
1fff0000-1fffffff : ACPI Tables
20000000-200007ff : 0000:02:07.0
20000800-2000081f : 0000:02:0c.0
20000a00-20000bff : 0000:02:0d.0
20001000-20001fff : 0000:02:0b.0
20002000-20002fff : 0000:02:0b.1
20004000-20007fff : 0000:02:07.0
eff00000-f7ffffff : PCI Bus #01
eff80000-efffffff : 0000:01:00.0
f0000000-f7ffffff : 0000:01:00.0
f0000000-f1ffffff : vesafb
f8000000-fbffffff : 0000:00:00.0
fceff000-fcefffff : 0000:02:08.0
fceff000-fcefffff : eepro100
fd000000-fdffffff : PCI Bus #01
fd000000-fdffffff : 0000:01:00.0
feea0000-feebffff : reserved
ffb80000-ffbfffff : reserved
fff80000-ffffffff : reserved
no modules, and no scsi
Software Environment:
note: I am using UNPATCHED kernel sources directly from kernel.org, not patched
sources from gentoo's portage tree.
gcc version 3.3.5 (Gentoo Linux 3.3.5-r1, ssp-3.3.2-3, pie-8.7.7.1)
Problem Description:
Previous to my 2.6.11.6 upgrade I was running 2.6.9. With all unpatched 2.6
kernel versions up to and including 2.6.9, I could turn the lcd backlight off by
running "echo lcd_out:0 > /proc/acpi/toshiba/video" as root. I upgraded directly
from 2.6.9 to 2.6.11.6. With the upgrade I am no longer able to turn the lcd
backlight off. There is no effect after running "echo lcd_out:0 >
/proc/acpi/toshiba/video" and the /proc/acpi/toshiba/video lcd_out option
remains unchanged as 1. I recompiled the 2.6.11.6 kernel with the new option
CONFIG_BACKLIGHT_LCD_SUPPORT=y. Enabling this option did not allow the command
(echo lcd_out:0 > /proc/acpi/toshiba/video) to turn the lcd backlight off, or
change the lcd_out option to 0. However, I do get the following entry in my
kernel logs after running the command while running 2.6.11.6, "[kernel] video
bus notify". Previous to the upgrade, there was no entry in my kernel logs after
running the command.
Steps to reproduce:
build 2.6.11.6 with
CONFIG_TOSHIBA=y
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
# CONFIG_ACPI_SLEEP is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
CONFIG_ACPI_TOSHIBA=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set
# CONFIG_ACPI_CONTAINER is not set
note: enabling the CONFIG_BACKLIGHT_LCD_SUPPORT option does not change anything.
and run, echo lcd_out:0 > /proc/acpi/toshiba/video
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
next reply other threads:[~2005-04-11 0:29 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-04-11 0:28 Andrew Morton [this message]
2005-04-11 19:10 ` Fw: [Bugme-new] [Bug 4468] New: Upgrade to 2.6.11.6 results in no longer being able to turn the lcd backlight off klug
2005-04-12 15:41 ` klug
2005-04-13 4:52 ` klug
2005-04-14 2:54 ` klug
2005-04-14 5:51 ` Antonino A. Daplas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050410172843.6366ef8a.akpm@osdl.org \
--to=akpm@osdl.org \
--cc=klug@blarg.org \
--cc=linux-fbdev-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.