From: oliver@windfinder.com
To: Matt_Domsch@dell.com, linux-poweredge@dell.com,
linux-scsi@vger.kernel.org, Thomas Glas <thomas.glas@hanse.net>
Subject: Raid1 on Dell Poweredge with Perc4e/Di Raid Controller running Debian Sarge (3.1)
Date: Wed, 20 Apr 2005 13:22:45 +0200 [thread overview]
Message-ID: <200504201322.50066.oliver@windfinder.com> (raw)
Hello,
I would like to use Raid1 on the Dell Poweredge with Perc4e/Di Raid Controller
and two 2 73 GB drives running Debian Sarge (3.1).
At http://linux.dell.com/storage.shtml I read that the Powerege 2850 Perc4e/Di
requires megaraid2 driver 2.00.3 or higher on 2.4.x kernel. On 2.6.x kernels
(x < 9) there is no driver for these adapters. On 2.6.x (x >= 9) use the
'megaraid_mbox' and 'megaraid_mm' drivers.
Problem: The Debian Installers offers only to install:
- 2.4.x (which seems to be okay for the raid) OR
- 2.6.8 (which would not allow the use of the Raid)
Solution:
Is there a megaraid driver for the 2.6.8 kernel? If so, where?
If not, should I use 2.4.x kernel or try to install a 2.6.9 kernel on Debian
Sarge?
Regards,
--
Oliver König
Windfinder.com
Knorrstr. 24 Hinterhaus
24106 Kiel
Germany
phone +49 431-8008643
VoIP +49 1801-7775558229
fax +49 431-8008644
Mobile +49 177-4933362
oliver@windfinder.com
www.windfinder.com
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2005-04-20 11:23 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-04-20 11:22 oliver [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-04-21 8:30 Raid1 on Dell Poweredge with Perc4e/Di Raid Controller running Debian Sarge (3.1) oliver
2005-04-22 19:14 Raid1 on Dell Poweredge with Perc4e/Di Raid Controller runnin gDebian " Dennis Ruzeski
2005-04-23 10:26 ` Raid1 on Dell Poweredge with Perc4e/Di Raid Controller running Debian " oliver
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200504201322.50066.oliver@windfinder.com \
--to=oliver@windfinder.com \
--cc=Matt_Domsch@dell.com \
--cc=linux-poweredge@dell.com \
--cc=linux-scsi@vger.kernel.org \
--cc=thomas.glas@hanse.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.