All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dave Jones <davej@redhat.com>
To: linux-kernel@vger.kernel.org
Subject: tighten i2c dependancies
Date: Sat, 30 Apr 2005 01:57:45 -0400	[thread overview]
Message-ID: <20050430055745.GB832@redhat.com> (raw)

A lot of these drivers show up on pretty much every arch
regardless of whether they make sense. This adds a bunch
of additional dependancies tying down platform specific drivers
that are unlikely to be used on other archs.

Signed-off-by: Dave Jones <davej@redhat.com>

--- linux-2.6.11/drivers/i2c/busses/Kconfig~	2005-04-16 01:05:36.000000000 -0400
+++ linux-2.6.11/drivers/i2c/busses/Kconfig	2005-04-16 01:06:09.000000000 -0400
@@ -376,7 +376,7 @@ config SCx200_I2C_SDA
 
 config SCx200_ACB
 	tristate "NatSemi SCx200 ACCESS.bus"
-	depends on I2C && PCI
+	depends on SCx200_I2C && PCI
 	help
 	  Enable the use of the ACCESS.bus controllers of a SCx200 processor.
 
--- linux-2.6.11/drivers/i2c/busses/Kconfig~	2005-04-16 01:07:57.000000000 -0400
+++ linux-2.6.11/drivers/i2c/busses/Kconfig	2005-04-16 01:11:10.000000000 -0400
@@ -7,7 +7,7 @@ menu "I2C Hardware Bus support"
 
 config I2C_ALI1535
 	tristate "ALI 1535"
-	depends on I2C && PCI && EXPERIMENTAL
+	depends on X86 && I2C && PCI && EXPERIMENTAL
 	help
 	  If you say yes to this option, support will be included for the SMB
 	  Host controller on Acer Labs Inc. (ALI) M1535 South Bridges.  The SMB
@@ -19,7 +19,7 @@ config I2C_ALI1535
 
 config I2C_ALI1563
 	tristate "ALI 1563"
-	depends on I2C && PCI && EXPERIMENTAL
+	depends on X86 && I2C && PCI && EXPERIMENTAL
 	help
 	  If you say yes to this option, support will be included for the SMB
 	  Host controller on Acer Labs Inc. (ALI) M1563 South Bridges.  The SMB
@@ -31,7 +31,7 @@ config I2C_ALI1563
 
 config I2C_ALI15X3
 	tristate "ALI 15x3"
-	depends on I2C && PCI && EXPERIMENTAL
+	depends on X86 && I2C && PCI && EXPERIMENTAL
 	help
 	  If you say yes to this option, support will be included for the
 	  Acer Labs Inc. (ALI) M1514 and M1543 motherboard I2C interfaces.
@@ -41,7 +41,7 @@ config I2C_ALI15X3
 
 config I2C_AMD756
 	tristate "AMD 756/766/768/8111 and nVidia nForce"
-	depends on I2C && PCI && EXPERIMENTAL
+	depends on X86 && I2C && PCI && EXPERIMENTAL
 	help
 	  If you say yes to this option, support will be included for the AMD
 	  756/766/768 mainboard I2C interfaces.  The driver also includes
@@ -53,7 +53,7 @@ config I2C_AMD756
 
 config I2C_AMD756_S4882
 	tristate "SMBus multiplexing on the Tyan S4882"
-	depends on I2C_AMD756 && EXPERIMENTAL
+	depends on X86 && I2C_AMD756 && EXPERIMENTAL
 	help
 	  Enabling this option will add specific SMBus support for the Tyan
 	  S4882 motherboard.  On this 4-CPU board, the SMBus is multiplexed
@@ -66,7 +66,7 @@ config I2C_AMD756_S4882
 
 config I2C_AMD8111
 	tristate "AMD 8111"
-	depends on I2C && PCI && EXPERIMENTAL
+	depends on X86 && I2C && PCI && EXPERIMENTAL
 	help
 	  If you say yes to this option, support will be included for the
 	  second (SMBus 2.0) AMD 8111 mainboard I2C interface.
@@ -109,7 +109,7 @@ config I2C_HYDRA
 
 config I2C_I801
 	tristate "Intel 82801 (ICH)"
-	depends on I2C && PCI && EXPERIMENTAL
+	depends on X86 && I2C && PCI && EXPERIMENTAL
 	help
 	  If you say yes to this option, support will be included for the Intel
 	  801 family of mainboard I2C interfaces.  Specifically, the following
@@ -129,7 +129,7 @@ config I2C_I801
 
 config I2C_I810
 	tristate "Intel 810/815"
-	depends on I2C && PCI && EXPERIMENTAL
+	depends on X86 && I2C && PCI && EXPERIMENTAL
 	select I2C_ALGOBIT
 	help
 	  If you say yes to this option, support will be included for the Intel
@@ -145,7 +145,7 @@ config I2C_I810
 
 config I2C_PIIX4
 	tristate "Intel PIIX4"
-	depends on I2C && PCI
+	depends on X86 && I2C && PCI
 	help
 	  If you say yes to this option, support will be included for the Intel
 	  PIIX4 family of mainboard I2C interfaces.  Specifically, the following
@@ -437,7 +437,7 @@ config I2C_STUB
 
 config I2C_VIA
 	tristate "VIA 82C586B"
-	depends on I2C && PCI && EXPERIMENTAL
+	depends on (X86 || PPC) && I2C && PCI && EXPERIMENTAL
 	select I2C_ALGOBIT
 	help
 	  If you say yes to this option, support will be included for the VIA
@@ -448,7 +448,7 @@ config I2C_VIA
 
 config I2C_VIAPRO
 	tristate "VIA 82C596/82C686/823x"
-	depends on I2C && PCI && EXPERIMENTAL
+	depends on (X86 || PPC) && I2C && PCI && EXPERIMENTAL
 	help
 	  If you say yes to this option, support will be included for the VIA
 	  82C596/82C686/823x I2C interfaces.  Specifically, the following 
--- linux-2.6.11/drivers/i2c/busses/Kconfig~	2005-04-16 01:16:48.000000000 -0400
+++ linux-2.6.11/drivers/i2c/busses/Kconfig	2005-04-16 01:17:11.000000000 -0400
@@ -387,7 +387,7 @@ config SCx200_ACB
 
 config I2C_SIS5595
 	tristate "SiS 5595"
-	depends on I2C && PCI && EXPERIMENTAL
+	depends on X86 && I2C && PCI && EXPERIMENTAL
 	help
 	  If you say yes to this option, support will be included for the 
 	  SiS5595 SMBus (a subset of I2C) interface.
@@ -397,7 +397,7 @@ config I2C_SIS5595
 
 config I2C_SIS630
 	tristate "SiS 630/730"
-	depends on I2C && PCI && EXPERIMENTAL
+	depends on X86 && I2C && PCI && EXPERIMENTAL
 	help
 	  If you say yes to this option, support will be included for the 
 	  SiS630 and SiS730 SMBus (a subset of I2C) interface.
@@ -407,7 +407,7 @@ config I2C_SIS630
 
 config I2C_SIS96X
 	tristate "SiS 96x"
-	depends on I2C && PCI && EXPERIMENTAL
+	depends on X86 && I2C && PCI && EXPERIMENTAL
 	help
 	  If you say yes to this option, support will be included for the SiS
 	  96x SMBus (a subset of I2C) interfaces.  Specifically, the following

             reply	other threads:[~2005-04-30  5:57 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-04-30  5:57 Dave Jones [this message]
2005-04-30  7:35 ` tighten i2c dependancies Christoph Hellwig
2005-04-30  7:42   ` Geert Uytterhoeven
2005-04-30 11:06 ` Christer Weinigel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20050430055745.GB832@redhat.com \
    --to=davej@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.