From: Attila Zsigmond <mail@backend-wizard.com>
To: bluez-users@lists.sourceforge.net
Subject: Re: [Bluez-users] Something strange with minicom
Date: Sat, 30 Apr 2005 20:29:43 +0200 [thread overview]
Message-ID: <200504302029.45490@ByZsA> (raw)
In-Reply-To: <1114818982.8836.116.camel@pegasus>
On Saturday 30 April 2005 01:56, Marcel Holtmann wrote:
> Hi Attila,
> use "hcidump -X -V --psm=3" so I don't have to decode everything by
> myself.
>
> Start hcidump earlier so it can decode the whole connection setup.
>
> Regards
>
> Marcel
Here is a dump with the parameters suggested. It seems normal for me. I
begin to think that this problem is in relation to my sharp gx15 phone
configuration and not to bluez. But I'm not sure. What do you think?
HCI sniffer - Bluetooth packet analyzer ver 1.20
device: hci0 snap_len: 1028 filter: 0xffffffff
< ACL data: handle 41 flags 0x02 dlen 12
L2CAP(d): cid 0x0041 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 0 b1 0 b2 0 b3 0 len 0
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41
> ACL data: handle 41 flags 0x02 dlen 12
L2CAP(d): cid 0x0040 len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 0 b1 0 b2 0 b3 0 len 0
< ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0041 len 5 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 1 fcs 0x9a
0000: 0d .
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41
> ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0040 len 5 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 1
< ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0041 len 5 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 1 fcs 0x9a
0000: 41 A
< ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0041 len 5 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 1 fcs 0x9a
0000: 54 T
< ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0041 len 5 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 1 fcs 0x9a
0000: 5a Z
< ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0041 len 5 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 1 fcs 0x9a
0000: 0d .
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41
> ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0040 len 5 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 1
> ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0040 len 5 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 1
> ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0040 len 5 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 1
> ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0040 len 5 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 1
> ACL data: handle 41 flags 0x02 dlen 17
L2CAP(d): cid 0x0040 len 13 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 0 ilen 9 fcs 0x40
0000: 0d 0a 45 52 52 4f 52 0d 0a ..ERROR..
< ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0041 len 5 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 1 fcs 0x9a
0000: 61 a
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41
> ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0040 len 5 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 1
< ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0041 len 5 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 1 fcs 0x9a
0000: 74 t
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41
> ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0040 len 5 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 1
< ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0041 len 5 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 1 fcs 0x9a
0000: 0d .
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41
> ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0040 len 5 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 1
> ACL data: handle 41 flags 0x02 dlen 14
L2CAP(d): cid 0x0040 len 10 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 0 ilen 6 fcs 0x40
0000: 0d 0a 4f 4b 0d 0a ..OK..
< ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0041 len 5 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 1 fcs 0x9a
0000: 61 a
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41
> ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0040 len 5 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 1
< ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0041 len 5 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 1 fcs 0x9a
0000: 74 t
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41
> ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0040 len 5 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 1
< ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0041 len 5 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 1 fcs 0x9a
0000: 0d .
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41
> ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0040 len 5 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 1
> ACL data: handle 41 flags 0x02 dlen 17
L2CAP(d): cid 0x0040 len 13 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 0 ilen 9 fcs 0x40
0000: 0d 0a 45 52 52 4f 52 0d 0a ..ERROR..
Attila
-------------------------------------------------------
This SF.Net email is sponsored by: NEC IT Guy Games.
Get your fingers limbered up and give it your best shot. 4 great events, 4
opportunities to win big! Highest score wins.NEC IT Guy Games. Play to
win an NEC 61 plasma display. Visit http://www.necitguy.com/?r=20
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next prev parent reply other threads:[~2005-04-30 18:29 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-04-29 22:03 [Bluez-users] Something strange with minicom Attila Zsigmond
2005-04-29 23:56 ` Marcel Holtmann
2005-04-30 18:29 ` Attila Zsigmond [this message]
2005-04-30 19:38 ` Marcel Holtmann
2005-05-02 10:22 ` Attila Zsigmond
2005-05-02 10:37 ` Marcel Holtmann
2005-05-02 12:02 ` Attila Zsigmond
2005-06-28 16:16 ` Attila Zsigmond
-- strict thread matches above, loose matches on Subject: below --
2005-04-29 16:33 Attila Zsigmond
2005-04-29 17:16 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200504302029.45490@ByZsA \
--to=mail@backend-wizard.com \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.