From: "Grégoire Favre" <Gregoire.Favre@gmail.com>
To: linux-kernel@vger.kernel.org
Subject: 2.6.12-rc[34] aic7xxx problems
Date: Sun, 8 May 2005 11:29:32 +0200 [thread overview]
Message-ID: <20050508092932.GA9133@gmail.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 437 bytes --]
Hello,
I don't know if 2.6.12-rc3 will boot completely if I let him enough
time, but 2.6.12-rc4 does, with plenty of errors.
For my usb scsi devices I have to probe for all luns, maybe it's
related ?
I attach what I have from dmesg, please CC to me if other infos are
needed :-)
--
Grégoire Favre
___________________________________________________________________
http://magma.epfl.ch/Gregoire.Favre mailto:Gregoire.Favre@gmail.com
[-- Attachment #2: dmesg --]
[-- Type: text/plain, Size: 14322 bytes --]
i1:0:1:0: Command found on device queue
aic7xxx_abort returns 0x2002
scsi1:0:1:0: Attempting to queue an ABORT message
CDB: 0x0 0x0 0x0 0x0 0x0 0x0
scsi1:0:1:0: Command found on device queue
aic7xxx_abort returns 0x2002
scsi1:0:1:0: Attempting to queue a TARGET RESET message
CDB: 0x12 0x0 0x0 0x0 0x60 0x0
scsi1:0:1:0: Command not found
aic7xxx_dev_reset returns 0x2002
scsi1:0:1:0: Attempting to queue an ABORT message
CDB: 0x0 0x0 0x0 0x0 0x0 0x0
scsi1:0:1:0: Command found on device queue
aic7xxx_abort returns 0x2002
scsi1:0:1:0: Attempting to queue an ABORT message
CDB: 0x0 0x0 0x0 0x0 0x0 0x0
scsi1:0:1:0: Command found on device queue
aic7xxx_abort returns 0x2002
scsi: Device offlined - not ready after error recovery: host 1 channel 0 id 1 lun 0
target1:0:1: Domain Validation detected failure, dropping back
scsi1:0:1:0: Attempting to queue an ABORT message
CDB: 0x12 0x0 0x0 0x0 0x60 0x0
scsi1:0:1:0: Command found on device queue
aic7xxx_abort returns 0x2002
scsi1:0:1:0: Attempting to queue an ABORT message
CDB: 0x0 0x0 0x0 0x0 0x0 0x0
scsi1:0:1:0: Command found on device queue
aic7xxx_abort returns 0x2002
scsi1:0:1:0: Attempting to queue a TARGET RESET message
CDB: 0x12 0x0 0x0 0x0 0x60 0x0
scsi1:0:1:0: Command not found
aic7xxx_dev_reset returns 0x2002
scsi1:0:1:0: Attempting to queue an ABORT message
CDB: 0x0 0x0 0x0 0x0 0x0 0x0
scsi1:0:1:0: Command found on device queue
aic7xxx_abort returns 0x2002
scsi1:0:1:0: Attempting to queue an ABORT message
CDB: 0x0 0x0 0x0 0x0 0x0 0x0
scsi1:0:1:0: Command found on device queue
aic7xxx_abort returns 0x2002
scsi: Device offlined - not ready after error recovery: host 1 channel 0 id 1 lun 0
target1:0:1: Domain Validation detected failure, dropping back
scsi1:0:1:0: Attempting to queue an ABORT message
CDB: 0x12 0x0 0x0 0x0 0x60 0x0
scsi1:0:1:0: Command found on device queue
aic7xxx_abort returns 0x2002
scsi1:0:1:0: Attempting to queue an ABORT message
CDB: 0x0 0x0 0x0 0x0 0x0 0x0
scsi1:0:1:0: Command found on device queue
aic7xxx_abort returns 0x2002
scsi1:0:1:0: Attempting to queue a TARGET RESET message
CDB: 0x12 0x0 0x0 0x0 0x60 0x0
scsi1:0:1:0: Command not found
aic7xxx_dev_reset returns 0x2002
scsi1:0:1:0: Attempting to queue an ABORT message
CDB: 0x0 0x0 0x0 0x0 0x0 0x0
scsi1:0:1:0: Command found on device queue
aic7xxx_abort returns 0x2002
scsi1:0:1:0: Attempting to queue an ABORT message
CDB: 0x0 0x0 0x0 0x0 0x0 0x0
scsi1:0:1:0: Command found on device queue
aic7xxx_abort returns 0x2002
scsi: Device offlined - not ready after error recovery: host 1 channel 0 id 1 lun 0
target1:0:1: Domain Validation detected failure, dropping back
scsi1:0:1:0: Attempting to queue an ABORT message
CDB: 0x12 0x0 0x0 0x0 0x60 0x0
scsi1:0:1:0: Command found on device queue
aic7xxx_abort returns 0x2002
scsi1:0:1:0: Attempting to queue an ABORT message
CDB: 0x0 0x0 0x0 0x0 0x0 0x0
scsi1:0:1:0: Command found on device queue
aic7xxx_abort returns 0x2002
scsi1:0:1:0: Attempting to queue a TARGET RESET message
CDB: 0x12 0x0 0x0 0x0 0x60 0x0
scsi1:0:1:0: Command not found
aic7xxx_dev_reset returns 0x2002
scsi1:0:1:0: Attempting to queue an ABORT message
CDB: 0x0 0x0 0x0 0x0 0x0 0x0
scsi1:0:1:0: Command found on device queue
aic7xxx_abort returns 0x2002
scsi1:0:1:0: Attempting to queue an ABORT message
CDB: 0x0 0x0 0x0 0x0 0x0 0x0
scsi1:0:1:0: Command found on device queue
aic7xxx_abort returns 0x2002
scsi: Device offlined - not ready after error recovery: host 1 channel 0 id 1 lun 0
target1:0:1: Domain Validation Failure, dropping back to Asynchronous
target1:0:1: Ending Domain Validation
Vendor: PLEXTOR Model: CD-R PX-R820T Rev: 1.08
Type: CD-ROM ANSI SCSI revision: 02
target1:0:2: Beginning Domain Validation
target1:0:2: Domain Validation skipping write tests
(scsi1:A:2): 10.000MB/s transfers (10.000MHz, offset 8)
target1:0:2: Ending Domain Validation
Vendor: PLEXTOR Model: CD-R PX-R820T Rev: 1.08
Type: CD-ROM ANSI SCSI revision: 02
target1:0:3: Beginning Domain Validation
target1:0:3: Domain Validation skipping write tests
(scsi1:A:3): 10.000MB/s transfers (10.000MHz, offset 8)
target1:0:3: Ending Domain Validation
libata version 1.10 loaded.
sata_via version 1.1
ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20
sata_via(0000:00:0f.0): routed to hard irq line 4
ata1: SATA max UDMA/133 cmd 0xE000 ctl 0xDC02 bmdma 0xD000 irq 20
ata2: SATA max UDMA/133 cmd 0xD800 ctl 0xD402 bmdma 0xD008 irq 20
ata1: no device found (phy stat 00000000)
scsi2 : sata_via
ata2: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4043 85:7c69 86:3e01 87:4043 88:407f
ata2: dev 0 ATA, max UDMA/133, 398297088 sectors: lba48
ata2: dev 0 configured for UDMA/133
scsi3 : sata_via
Vendor: ATA Model: Maxtor 6B200M0 Rev: BANC
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 17850000 512-byte hdwr sectors (9139 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 17850000 512-byte hdwr sectors (9139 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 71687370 512-byte hdwr sectors (36704 MB)
SCSI device sdb: drive cache: write back
SCSI device sdb: 71687370 512-byte hdwr sectors (36704 MB)
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2
Attached scsi disk sdb at scsi0, channel 0, id 15, lun 0
SCSI device sdc: 398297088 512-byte hdwr sectors (203928 MB)
SCSI device sdc: drive cache: write back
SCSI device sdc: 398297088 512-byte hdwr sectors (203928 MB)
SCSI device sdc: drive cache: write back
sdc: sdc1 sdc2
Attached scsi disk sdc at scsi3, channel 0, id 0, lun 0
scsi1:0:1:0: Attempting to queue an ABORT message
CDB: 0x0 0x0 0x0 0x0 0x0 0x0
scsi1:0:1:0: Command found on device queue
aic7xxx_abort returns 0x2002
scsi1:0:1:0: Attempting to queue an ABORT message
CDB: 0x0 0x0 0x0 0x0 0x0 0x0
scsi1:0:1:0: Command found on device queue
aic7xxx_abort returns 0x2002
scsi1:0:1:0: Attempting to queue a TARGET RESET message
CDB: 0x0 0x0 0x0 0x0 0x0 0x0
scsi1:0:1:0: Command not found
aic7xxx_dev_reset returns 0x2002
scsi1:0:1:0: Attempting to queue an ABORT message
CDB: 0x0 0x0 0x0 0x0 0x0 0x0
scsi1:0:1:0: Command found on device queue
aic7xxx_abort returns 0x2002
scsi1:0:1:0: Attempting to queue an ABORT message
CDB: 0x0 0x0 0x0 0x0 0x0 0x0
scsi1:0:1:0: Command found on device queue
aic7xxx_abort returns 0x2002
scsi: Device offlined - not ready after error recovery: host 1 channel 0 id 1 lun 0
scsi1 (1:0): rejecting I/O to offline device
sr0: scsi3-mmc drive: 0x/0x caddy
Attached scsi CD-ROM sr0 at scsi1, channel 0, id 1, lun 0
sr1: scsi3-mmc drive: 20x/20x writer cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr1 at scsi1, channel 0, id 2, lun 0
sr2: scsi3-mmc drive: 20x/20x writer cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr2 at scsi1, channel 0, id 3, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
Attached scsi generic sg1 at scsi0, channel 0, id 15, lun 0, type 0
Attached scsi generic sg2 at scsi1, channel 0, id 1, lun 0, type 5
Attached scsi generic sg3 at scsi1, channel 0, id 2, lun 0, type 5
Attached scsi generic sg4 at scsi1, channel 0, id 3, lun 0, type 5
Attached scsi generic sg5 at scsi3, channel 0, id 0, lun 0, type 0
usbmon: debugs is not available
ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:10.4: VIA Technologies, Inc. USB 2.0
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: irq 21, io mem 0xcfffe900
ehci_hcd 0000:00:10.4: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 21, io base 0x0000bc00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 21, io base 0x0000c000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c400
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4)
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:10.3: irq 21, io base 0x0000c800
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
mice: PS/2 mouse device common for all mice
input: PC Speaker
Advanced Linux Sound Architecture Driver Version 1.0.9rc2 (Thu Mar 24 10:33:39 2005 UTC).
via82xx: Assuming DXS channels with 48k fixed sample rate.
Please try dxs_support=1 or dxs_support=4 option
and report if it works on your machine.
ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:11.5 to 64
input: AT Translated Set 2 keyboard on isa0060/serio0
logips2pp: Detected unknown logitech mouse model 99
input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
ALSA device list:
#0: VIA 8237 with ALC655 at 0xb800, irq 22
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
ip_tables: (C) 2000-2002 Netfilter core team
arp_tables: (C) 2002 David S. Miller
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
Testing NMI watchdog ... <3>ehci_hcd 0000:00:10.4: port 8 reset error -110
hub 1-0:1.0: hub_port_status failed (err = -32)
usb 1-8: new high speed USB device using ehci_hcd and address 2
hub 1-8:1.0: USB hub found
hub 1-8:1.0: 2 ports detected
usb 1-8.1: new high speed USB device using ehci_hcd and address 3
hub 1-8.1:1.0: USB hub found
hub 1-8.1:1.0: 4 ports detected
usb 1-8.2: new high speed USB device using ehci_hcd and address 4
OK.
ACPI wakeup devices:
PCI0 UAR1 USB1 USB2 USB3 USB4 EHCI USBD AC9 MC9 ILAN SLPB
ACPI: (supports S0 S1 S3 S4 S5)
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
hub 1-8.1:1.0: hub_port_status failed (err = -71)
hub 1-8.1:1.0: hub_port_status failed (err = -71)
hub 1-8.1:1.0: hub_port_status failed (err = -71)
hub 1-8.1:1.0: hub_port_status failed (err = -71)
usb 1-8: USB disconnect, address 2
usb 1-8.1: USB disconnect, address 3
usb 1-8.2: USB disconnect, address 4
ReiserFS: sdc2: found reiserfs format "3.6" with standard journal
usb 1-8: new high speed USB device using ehci_hcd and address 5
hub 1-8:1.0: USB hub found
hub 1-8:1.0: 2 ports detected
usb 1-8.1: new high speed USB device using ehci_hcd and address 6
hub 1-8.1:1.0: USB hub found
hub 1-8.1:1.0: 4 ports detected
usb 1-8.2: new high speed USB device using ehci_hcd and address 7
scsi5 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 7
usb-storage: waiting for device to settle before scanning
Vendor: SMSC Model: 223 U HS-CF Rev: 3.60
Type: Direct-Access ANSI SCSI revision: 00
Attached scsi removable disk sdd at scsi5, channel 0, id 0, lun 0
Attached scsi generic sg6 at scsi5, channel 0, id 0, lun 0, type 0
Vendor: SMSC Model: 223 U HS-MS Rev: 3.60
Type: Direct-Access ANSI SCSI revision: 00
Attached scsi removable disk sde at scsi5, channel 0, id 0, lun 1
Attached scsi generic sg7 at scsi5, channel 0, id 0, lun 1, type 0
Vendor: SMSC Model: 223 U HS-SM Rev: 3.60
Type: Direct-Access ANSI SCSI revision: 00
Attached scsi removable disk sdf at scsi5, channel 0, id 0, lun 2
Attached scsi generic sg8 at scsi5, channel 0, id 0, lun 2, type 0
Vendor: SMSC Model: 223 U HS-SD/MMC Rev: 3.60
Type: Direct-Access ANSI SCSI revision: 00
Attached scsi removable disk sdg at scsi5, channel 0, id 0, lun 3
Attached scsi generic sg9 at scsi5, channel 0, id 0, lun 3, type 0
usb-storage: device scan complete
ReiserFS: sdc2: using ordered data mode
ReiserFS: sdc2: journal params: device sdc2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sdc2: checking transaction log (sdc2)
ReiserFS: sdc2: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 160k freed
Adding 506036k swap on /dev/hda2. Priority:2 extents:1
Adding 530136k swap on /dev/sda2. Priority:2 extents:1
Adding 530104k swap on /dev/sdb1. Priority:1 extents:1
Adding 1004020k swap on /dev/sdc1. Priority:3 extents:1
Linux agpgart interface v0.101 (c) Dave Jones
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
NVRM: loading NVIDIA Linux x86_64 NVIDIA Kernel Module 1.0-7174 Tue Mar 22 06:45:40 PST 2005
XFS mounting filesystem sdb2
Ending clean XFS mount for filesystem: sdb2
XFS mounting filesystem hda4
Ending clean XFS mount for filesystem: hda4
ReiserFS: sda1: found reiserfs format "3.6" with standard journal
ReiserFS: sda1: using ordered data mode
ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda1: checking transaction log (sda1)
ReiserFS: sda1: Using r5 hash to sort names
reply other threads:[~2005-05-08 9:29 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050508092932.GA9133@gmail.com \
--to=gregoire.favre@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.