From: Johannes Stezenbach <js@linuxtv.org>
To: Andrew Morton <akpm@osdl.org>
Cc: linux-kernel@vger.kernel.org
Subject: [DVB patch 01/37] support for TT/Hauppauge Nexus-S Rev 2.3
Date: Sun, 08 May 2005 20:42:30 +0200 [thread overview]
Message-ID: <20050508184345.178661000@abc> (raw)
In-Reply-To: 20050508184229.957247000@abc
[-- Attachment #1: dvb-ttpci-nexus23.patch --]
[-- Type: text/plain, Size: 5438 bytes --]
Support for TT/Hauppauge Nexus-S Rev 2.3 (Oliver Endriss)
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
---
drivers/media/dvb/ttpci/av7110.c | 116 +++++++++++++++++++++++++++++++++++++--
1 files changed, 113 insertions(+), 3 deletions(-)
Index: linux-2.6.12-rc4/drivers/media/dvb/ttpci/av7110.c
===================================================================
--- linux-2.6.12-rc4.orig/drivers/media/dvb/ttpci/av7110.c 2005-05-08 18:23:20.000000000 +0200
+++ linux-2.6.12-rc4/drivers/media/dvb/ttpci/av7110.c 2005-05-08 20:24:35.000000000 +0200
@@ -1673,6 +1673,106 @@ static struct stv0299_config alps_bsru6_
};
+static u8 alps_bsbe1_inittab[] = {
+ 0x01, 0x15,
+ 0x02, 0x30,
+ 0x03, 0x00,
+ 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
+ 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */
+ 0x06, 0x40, /* DAC not used, set to high impendance mode */
+ 0x07, 0x00, /* DAC LSB */
+ 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */
+ 0x09, 0x00, /* FIFO */
+ 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
+ 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */
+ 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */
+ 0x10, 0x3f, // AGC2 0x3d
+ 0x11, 0x84,
+ 0x12, 0xb5, // Lock detect: -64 Carrier freq detect:on
+ 0x15, 0xc9, // lock detector threshold
+ 0x16, 0x00,
+ 0x17, 0x00,
+ 0x18, 0x00,
+ 0x19, 0x00,
+ 0x1a, 0x00,
+ 0x1f, 0x50,
+ 0x20, 0x00,
+ 0x21, 0x00,
+ 0x22, 0x00,
+ 0x23, 0x00,
+ 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0
+ 0x29, 0x1e, // 1/2 threshold
+ 0x2a, 0x14, // 2/3 threshold
+ 0x2b, 0x0f, // 3/4 threshold
+ 0x2c, 0x09, // 5/6 threshold
+ 0x2d, 0x05, // 7/8 threshold
+ 0x2e, 0x01,
+ 0x31, 0x1f, // test all FECs
+ 0x32, 0x19, // viterbi and synchro search
+ 0x33, 0xfc, // rs control
+ 0x34, 0x93, // error control
+ 0x0f, 0x92,
+ 0xff, 0xff
+};
+
+static int alps_bsbe1_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
+{
+ struct av7110* av7110 = (struct av7110*) fe->dvb->priv;
+ int ret;
+ u8 data[4];
+ u32 div;
+ struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
+
+ if ((params->frequency < 950000) || (params->frequency > 2150000))
+ return -EINVAL;
+
+ div = (params->frequency + (125 - 1)) / 125; // round correctly
+ data[0] = (div >> 8) & 0x7f;
+ data[1] = div & 0xff;
+ data[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
+ data[3] = (params->frequency > 1530000) ? 0xE0 : 0xE4;
+
+ ret = i2c_transfer(&av7110->i2c_adap, &msg, 1);
+ return (ret != 1) ? -EIO : 0;
+}
+
+static struct stv0299_config alps_bsbe1_config = {
+ .demod_address = 0x68,
+ .inittab = alps_bsbe1_inittab,
+ .mclk = 88000000UL,
+ .invert = 1,
+ .enhanced_tuning = 0,
+ .skip_reinit = 0,
+ .min_delay_ms = 100,
+ .set_symbol_rate = alps_bsru6_set_symbol_rate,
+ .pll_set = alps_bsbe1_pll_set,
+};
+
+static int lnbp21_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
+{
+ struct av7110* av7110 = (struct av7110*) fe->dvb->priv;
+ int ret;
+ u8 data[1];
+ struct i2c_msg msg = { .addr = 0x08, .flags = 0, .buf = data, .len = sizeof(data) };
+
+ switch(voltage) {
+ case SEC_VOLTAGE_OFF:
+ data[0] = 0x00;
+ break;
+ case SEC_VOLTAGE_13:
+ data[0] = 0x44;
+ break;
+ case SEC_VOLTAGE_18:
+ data[0] = 0x4c;
+ break;
+ default:
+ return -EINVAL;
+ };
+
+ ret = i2c_transfer(&av7110->i2c_adap, &msg, 1);
+ return (ret != 1) ? -EIO : 0;
+}
+
static int alps_tdbe2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
{
@@ -2116,6 +2216,14 @@ static int frontend_init(struct av7110 *
av7110->dev->i2c_bitrate = SAA7146_I2C_BUS_BIT_RATE_240;
break;
}
+ break;
+
+ case 0x000E: /* Hauppauge/TT Nexus-S rev 2.3 */
+ /* ALPS BSBE1 */
+ av7110->fe = stv0299_attach(&alps_bsbe1_config, &av7110->i2c_adap);
+ if (av7110->fe)
+ av7110->fe->ops->set_voltage = lnbp21_set_voltage;
+ break;
}
}
@@ -2672,21 +2780,23 @@ MAKE_AV7110_INFO(ttt_1_X, "Technotren
MAKE_AV7110_INFO(ttc_1_X, "Technotrend/Hauppauge WinTV Nexus-CA rev1.X");
MAKE_AV7110_INFO(ttc_2_X, "Technotrend/Hauppauge WinTV DVB-C rev2.X");
MAKE_AV7110_INFO(tts_2_X, "Technotrend/Hauppauge WinTV Nexus-S rev2.X");
+MAKE_AV7110_INFO(tts_2_3, "Technotrend/Hauppauge WinTV Nexus-S rev2.3");
MAKE_AV7110_INFO(tts_1_3se, "Technotrend/Hauppauge WinTV DVB-S rev1.3 SE");
MAKE_AV7110_INFO(ttt, "Technotrend/Hauppauge DVB-T");
MAKE_AV7110_INFO(fsc, "Fujitsu Siemens DVB-C");
MAKE_AV7110_INFO(fss, "Fujitsu Siemens DVB-S rev1.6");
static struct pci_device_id pci_tbl[] = {
+ MAKE_EXTENSION_PCI(fsc, 0x110a, 0x0000),
MAKE_EXTENSION_PCI(tts_1_X, 0x13c2, 0x0000),
MAKE_EXTENSION_PCI(ttt_1_X, 0x13c2, 0x0001),
MAKE_EXTENSION_PCI(ttc_2_X, 0x13c2, 0x0002),
MAKE_EXTENSION_PCI(tts_2_X, 0x13c2, 0x0003),
- MAKE_EXTENSION_PCI(tts_1_3se, 0x13c2, 0x1002),
- MAKE_EXTENSION_PCI(fsc, 0x110a, 0x0000),
- MAKE_EXTENSION_PCI(ttc_1_X, 0x13c2, 0x000a),
MAKE_EXTENSION_PCI(fss, 0x13c2, 0x0006),
MAKE_EXTENSION_PCI(ttt, 0x13c2, 0x0008),
+ MAKE_EXTENSION_PCI(ttc_1_X, 0x13c2, 0x000a),
+ MAKE_EXTENSION_PCI(tts_2_3, 0x13c2, 0x000e),
+ MAKE_EXTENSION_PCI(tts_1_3se, 0x13c2, 0x1002),
/* MAKE_EXTENSION_PCI(???, 0x13c2, 0x0004), UNDEFINED CARD */ // Galaxis DVB PC-Sat-Carte
/* MAKE_EXTENSION_PCI(???, 0x13c2, 0x0005), UNDEFINED CARD */ // Technisat SkyStar1
--
next prev parent reply other threads:[~2005-05-08 19:56 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-05-08 18:42 [DVB patch 00/37] DVB updates for 2.6.12-rc4 Johannes Stezenbach
2005-05-08 18:42 ` Johannes Stezenbach [this message]
2005-05-08 18:42 ` [DVB patch 02/37] saa7146: no need to initialize static/global variables to 0 Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 03/37] dvb_frontend: fix module param Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 04/37] av7110: audio out fix Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 05/37] add support for KNC-1 cards Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 06/37] remove unnecessary casts in dvb-core Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 07/37] make dvb_class static Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 08/37] dvb_net: handle IPv6 and LLC/SNAP Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 09/37] av7110: fix VIDEO_SET_DISPLAY_FORMAT Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 10/37] av7110: fix NTSC/PAL switching Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 11/37] av7110: fix comment Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 12/37] av7110: fix indentation Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 13/37] nxt6000: support frontend status reads Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 14/37] tda1004x: formatting cleanups Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 15/37] stv0299: fix FE_DISHNETWORK_SEND_LEGACY_CMD Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 16/37] remove unnecessary casts in frontends Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 17/37] dib3000: add NULL pointer check Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 18/37] ves1820: remove unnecessary msleep Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 19/37] mt352: embed struct mt352_config in mt352_state Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 20/37] tda1004x: dont use bitfields Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 21/37] tda1004x: allow N_I2C to be overridden by the card driver Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 22/37] tda10046: support for different firmware versions Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 23/37] dvb-pll.h: prevent multiple inclusion Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 24/37] make needlessly global code static or drop it Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 25/37] frontends: misc. minor cleanups Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 26/37] modified dvb_register_adapter() to avoid kmalloc/kfree Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 27/37] bt8xx: update documentation Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 28/37] DST: reorganize Twinhan DST driver to support CI Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 29/37] DST: add support for Twinhan 200103A Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 30/37] DST: fixed tuning problem Johannes Stezenbach
2005-05-08 18:43 ` [DVB patch 31/37] DST: fix for descrambling failure Johannes Stezenbach
2005-05-08 18:43 ` [DVB patch 32/37] DST: misc. fixes Johannes Stezenbach
2005-05-08 18:43 ` [DVB patch 33/37] bt8xx: updated documentation Johannes Stezenbach
2005-05-08 18:43 ` [DVB patch 34/37] DST: fix a bug in the module parameter Johannes Stezenbach
2005-05-08 18:43 ` [DVB patch 35/37] DST: fixed CI debug output Johannes Stezenbach
2005-05-08 18:43 ` [DVB patch 36/37] bt8xx: whitespace cleanup Johannes Stezenbach
2005-05-08 18:43 ` [DVB patch 37/37] budget-av: CI fixes Johannes Stezenbach
2005-05-10 1:04 ` [DVB patch 00/37] DVB updates for 2.6.12-rc4 Andrew Morton
2005-05-10 8:52 ` Johannes Stezenbach
2005-05-10 9:16 ` Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050508184345.178661000@abc \
--to=js@linuxtv.org \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.