From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S262762AbVEHUD6 (ORCPT ); Sun, 8 May 2005 16:03:58 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S262965AbVEHUCT (ORCPT ); Sun, 8 May 2005 16:02:19 -0400 Received: from ipx10786.ipxserver.de ([80.190.251.108]:2711 "EHLO allen.werkleitz.de") by vger.kernel.org with ESMTP id S262936AbVEHTKN (ORCPT ); Sun, 8 May 2005 15:10:13 -0400 Message-Id: <20050508184349.607746000@abc> References: <20050508184229.957247000@abc> Date: Sun, 08 May 2005 20:43:02 +0200 From: Johannes Stezenbach To: Andrew Morton Cc: linux-kernel@vger.kernel.org Content-Disposition: inline; filename=dvb-bt8xx-readme.patch X-SA-Exim-Connect-IP: 217.231.45.168 Subject: [DVB patch 33/37] bt8xx: updated documentation X-SA-Exim-Version: 4.2 (built Thu, 03 Mar 2005 10:44:12 +0100) X-SA-Exim-Scanned: Yes (on allen.werkleitz.de) Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org updated documentation (Manu Abraham) Signed-off-by: Johannes Stezenbach --- Documentation/dvb/bt8xx.txt | 42 ++++++++++++++++-------------------------- 1 files changed, 16 insertions(+), 26 deletions(-) Index: linux-2.6.12-rc4/Documentation/dvb/bt8xx.txt =================================================================== --- linux-2.6.12-rc4.orig/Documentation/dvb/bt8xx.txt 2005-05-08 18:13:24.000000000 +0200 +++ linux-2.6.12-rc4/Documentation/dvb/bt8xx.txt 2005-05-08 18:13:58.000000000 +0200 @@ -35,45 +35,35 @@ TwinHan (dst) are loaded automatically b $ modprobe bttv (normally bttv is being loaded automatically by kmod) $ modprobe dvb-bt8xx (or just place dvb-bt8xx in /etc/modules for automatic loading) -3b) TwinHan ------------ + +3b) TwinHan and Clones +-------------------------- $ modprobe bttv i2c_hw=1 card=0x71 $ modprobe dvb-bt8xx $ modprobe dst -The value 0x71 will override the PCI type detection for dvb-bt8xx, which -is necessary for TwinHan cards.# - -If you're having an older card (blue color circuit) and card=0x71 locks your -machine, try using 0x68, too. If that does not work, ask on the DVB mailing list. +The value 0x71 will override the PCI type detection for dvb-bt8xx, +which is necessary for TwinHan cards. -The DST module takes a couple of useful parameters, in case the -dst drivers fails to detect your type of card correctly. +If you're having an older card (blue color circuit) and card=0x71 locks +your machine, try using 0x68, too. If that does not work, ask on the +mailing list. -dst_type takes values 0 (satellite), 1 (terrestial TV), 2 (cable). +The DST module takes a couple of useful parameters. -dst_type_flags takes bit combined values: -1 = new tuner type packets. You can use this if your card is detected - and you have debug and you continually see the tuner packets not - working (make sure not a basic problem like dish alignment etc.) +verbose takes values 0 to 5. These values control the verbosity level. -2 = TS 204. If your card tunes OK, but the picture is terrible, seemingly - breaking up in one half continually, and crc fails a lot, then - this is worth a try (or trying to turn off) +debug takes values 0 and 1. You can either disable or enable debugging. -4 = has symdiv. Some cards, mostly without new tuner packets, require - a symbol division algorithm. Doesn't apply to terrestial TV. +dst_addons takes values 0 and 0x20. A value of 0 means it is a FTA card. +0x20 means it has a Conditional Access slot. -You can also specify a value to have the autodetected values turned off -(e.g. 0). The autodected values are determined bythe cards 'response +The autodected values are determined bythe cards 'response string' which you can see in your logs e.g. -dst_check_ci: recognize DST-MOT - -or +dst_get_device_id: Recognise [DSTMCI] -dst_check_ci: unable to recognize DSTXCI or STXCI -- -Authors: Richard Walker, Jamie Honan, Michael Hunold +Authors: Richard Walker, Jamie Honan, Michael Hunold, Manu Abraham --