From: Cai Qiang <caiqiang@ustc.edu>
To: qemu-devel@nongnu.org
Cc: alexander.burker@ucs.at
Subject: [Qemu-devel] patch for serial port support(linux host only)
Date: Mon, 9 May 2005 10:01:07 +0000 [thread overview]
Message-ID: <200505091001.08680.caiqiang@ustc.edu> (raw)
Hi,
Here are patch for serial port support(partial; linux host only). You can
invoke it by adding sth like "-serial /dev/ttyS0" in arguments to let qemu
using host's serial port as its serial port. qemu will change host's serial
port setting(baudrate, databits, stopbits, parity) when guest os change them.
In my test, I use minicom's zmodem to send file. When sending file to qemu,
things works fine. When sending file from qemu, file can be sent completely,
but qemu gives many warning saying "serial8250: too much work for irq4".
I has also worked on serial port support for windows host, but my build of
qemu always crash, althrough I have tried different method: cross-compile
using i386-mingw32msvc; mingw/msys. If anyone who has build qemu windows
port can teach me about it, I will try to finish my windows support when I
get time.
Any comments/tests are welcome.
Best Regards
Cai Qiang
--- qemu-0.7.0/vl.c 2005-04-27 20:52:05.000000000 +0000
+++ qemu-0.7.0-serialport/vl.c 2005-05-09 09:24:43.000000000 +0000
@@ -1226,13 +1226,13 @@
fcntl(0, F_SETFL, old_fd0_flags);
}
-static void term_init(void)
+static void term_init(int in)
{
struct termios tty;
- tcgetattr (0, &tty);
+ tcgetattr (in, &tty);
oldtty = tty;
- old_fd0_flags = fcntl(0, F_GETFL);
+ old_fd0_flags = fcntl(in, F_GETFL);
tty.c_iflag &= ~(IGNBRK|BRKINT|PARMRK|ISTRIP
|INLCR|IGNCR|ICRNL|IXON);
@@ -1246,11 +1246,11 @@
tty.c_cc[VMIN] = 1;
tty.c_cc[VTIME] = 0;
- tcsetattr (0, TCSANOW, &tty);
+ tcsetattr (in, TCSANOW, &tty);
atexit(term_exit);
- fcntl(0, F_SETFL, O_NONBLOCK);
+ fcntl(in, F_SETFL, O_NONBLOCK);
}
CharDriverState *qemu_chr_open_stdio(void)
@@ -1272,7 +1272,7 @@
stdio_clients[stdio_nb_clients++] = chr;
if (stdio_nb_clients == 1) {
/* set the terminal in raw mode */
- term_init();
+ term_init(0);
}
return chr;
}
@@ -1290,6 +1290,126 @@
fprintf(stderr, "char device redirected to %s\n", slave_name);
return qemu_chr_open_fd(master_fd, master_fd);
}
+
+#include <termios.h>
+static void set_baudrate(int fd, int v)
+{
+ struct termios newtio;
+ int BaudRate;
+
+ switch (v) {
+ case 600: BaudRate = B600; break;
+ case 1200: BaudRate = B1200; break;
+ case 2400: BaudRate = B2400; break;
+ case 4800: BaudRate = B4800; break;
+ case 9600: BaudRate = B9600; break;
+ case 19200: BaudRate = B19200; break;
+ case 38400: BaudRate = B38400; break;
+ case 57600: BaudRate = B57600; break;
+ case 115200:BaudRate = B115200; break;
+ default: BaudRate=B115200; break;
+ }
+
+ tcgetattr( fd,&newtio);
+ newtio.c_cflag &= ~CBAUD;
+ newtio.c_cflag |= BaudRate;
+ tcflush(fd, TCIFLUSH);
+ tcsetattr(fd,TCSANOW,&newtio);
+}
+
+static void set_databits(int fd, int v)
+{
+ struct termios newtio;
+
+ tcgetattr( fd,&newtio);
+ newtio.c_cflag &= ~CSIZE;
+ const int databits[] = { CS5, CS6, CS7, CS8 };
+ v-=5;
+ newtio.c_cflag |= v<sizeof(databits)/sizeof(databits[0])?databits[v]:CS8;
+ tcflush(fd, TCIFLUSH);
+ tcsetattr(fd,TCSANOW,&newtio);
+}
+
+static void set_stopbits(int fd, int v)
+{
+ struct termios newtio;
+
+ tcgetattr( fd,&newtio);
+ if (v==2)
+ newtio.c_cflag |= CSTOPB;
+ else
+ newtio.c_cflag &= ~CSTOPB;
+ tcflush(fd, TCIFLUSH);
+ tcsetattr(fd,TCSANOW,&newtio);
+}
+static void set_parity(int fd, int v)
+{
+ struct termios newtio;
+
+ tcgetattr( fd,&newtio);
+ switch (v) {
+ case 0:
+ newtio.c_iflag=0;
+ break;
+ case 1:
+ newtio.c_iflag = INPCK;
+ newtio.c_cflag |= PARENB|PARODD;
+ break;
+ case 2:
+ newtio.c_iflag = INPCK;
+ newtio.c_cflag |= PARENB;
+ newtio.c_cflag &= ~PARODD;
+ break;
+ case 3:
+ break;
+ case 4:
+ break;
+ }
+ tcflush(fd, TCIFLUSH);
+ tcsetattr(fd,TCSANOW,&newtio);
+}
+
+static void Notify_serial_param_set( CharDriverState *chr, int msg)
+{
+ if (chr != NULL) {
+ int mode=msg>>16, param=msg&0xffff;
+ int pmode;
+ switch (mode) {
+ case 0:
+ case 1:
+#define PC_CLOCK_XTL 1843200.0
+ set_baudrate(((FDCharDriver *)(chr->opaque))->fd_in, (int)
(PC_CLOCK_XTL /(16 * param)));
+ break;
+ case 3: //lcr
+ set_databits(((FDCharDriver *)(chr->opaque))->fd_in,(param&0x03)
+ 5);
+ set_stopbits(((FDCharDriver *)(chr->opaque))->fd_in,
(param&(1<<2)) ? 2 : 1);
+ if ((param&(1<<3)) == 0)
+ pmode = 0;
+ else
+ pmode = ((param & 0x30) >> 4) + 1;
+ set_parity(((FDCharDriver *)(chr->opaque))->fd_in,pmode);
+ break;
+ default:
+ break;
+ }
+ }
+}
+
+static CharDriverState *qemu_chr_open_dev(const char *devname)
+{
+ int fd;
+ CharDriverState *s;
+
+ if ( (fd=open(devname, O_RDWR|O_NDELAY)) < 0)
+ return NULL;
+ s = qemu_chr_open_fd(fd, fd);
+ if (s!=NULL) {
+ s->chr_send_event=Notify_serial_param_set;
+ /* set the terminal in raw mode */
+ term_init(fd);
+ }
+ return s;
+}
#else
CharDriverState *qemu_chr_open_pty(void)
{
@@ -1311,6 +1431,8 @@
return qemu_chr_open_pty();
} else if (!strcmp(filename, "stdio")) {
return qemu_chr_open_stdio();
+ } else if (!strncmp(filename, "/dev/", 5)) {
+ return qemu_chr_open_dev(filename);
} else
#endif
{
--- qemu-0.7.0/hw/serial.c 2005-04-27 20:52:05.000000000 +0000
+++ qemu-0.7.0-serialport/hw/serial.c 2005-05-09 09:14:39.000000000 +0000
@@ -117,6 +117,7 @@
case 0:
if (s->lcr & UART_LCR_DLAB) {
s->divider = (s->divider & 0xff00) | val;
+ qemu_chr_send_event(s->chr, (addr<<16)|s->divider);
} else {
s->thr_ipending = 0;
s->lsr &= ~UART_LSR_THRE;
@@ -132,6 +133,7 @@
case 1:
if (s->lcr & UART_LCR_DLAB) {
s->divider = (s->divider & 0x00ff) | (val << 8);
+ qemu_chr_send_event(s->chr, (addr<<16)|s->divider);
} else {
s->ier = val & 0x0f;
if (s->lsr & UART_LSR_THRE) {
@@ -144,6 +146,7 @@
break;
case 3:
s->lcr = val;
+ qemu_chr_send_event(s->chr, (addr<<16)|val);
break;
case 4:
s->mcr = val & 0x1f;
next reply other threads:[~2005-05-09 2:08 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-05-09 10:01 Cai Qiang [this message]
2005-05-09 7:04 ` [Qemu-devel] patch for serial port support(linux host only) Filip Navara
2005-05-09 15:31 ` Cai Qiang
2005-05-20 16:42 ` [Qemu-devel] FreeDOS FDAPM kills Keybord Andreas Bollhalder
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200505091001.08680.caiqiang@ustc.edu \
--to=caiqiang@ustc.edu \
--cc=alexander.burker@ucs.at \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.