From: spiral <spiral@laposte.net>
To: alsa-devel@lists.sourceforge.net
Subject: Re: Alsa-devel digest, Vol 1 #3297 - 13 msgs
Date: Thu, 12 May 2005 22:46:08 +0200 [thread overview]
Message-ID: <200505122246.08566.spiral@laposte.net> (raw)
In-Reply-To: <20050512154727.B414212F1B@sc8-sf-spam2.sourceforge.net>
Hi,
I can't have this patch working... I don't manage to set position_fix=1... How
should I do so ? Maybe isn't it up2date on the cvs ?
Anyway, I give a copy of "cat /proc/asound/card0/codec#*" here :
Codec: Realtek ALC880
Address: 0
Vendor Id: 0x10ec0880
Subsystem Id: 0x0
Revision Id: 0x90500
Default PCM: rates 0x560, bits 0x0e, types 0x1
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
Node 0x02 [Audio Output] wcaps 0x411: Stereo
PCM: rates 0x560, bits 0x0e, types 0x1
Node 0x03 [Audio Output] wcaps 0x411: Stereo
PCM: rates 0x560, bits 0x0e, types 0x1
Node 0x04 [Audio Output] wcaps 0x411: Stereo
PCM: rates 0x160, bits 0x0e, types 0x1
Node 0x05 [Audio Output] wcaps 0x411: Stereo
PCM: rates 0x160, bits 0x0e, types 0x1
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
PCM: rates 0x160, bits 0x1e, types 0x1
Node 0x07 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1
Amp-In vals: 0x00 0x00
PCM: rates 0x160, bits 0x06, types 0x1
Connection: 7
0x18* 0x19 0x1a 0x1b 0x1c 0x14 0x15
Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1
Amp-In vals: 0x00 0x00
PCM: rates 0x160, bits 0x06, types 0x1
Connection: 7
0x18 0x19 0x1a* 0x1b 0x1c 0x14 0x15
Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1
Amp-In vals: 0x00 0x00
PCM: rates 0x160, bits 0x06, types 0x1
Connection: 10
0x18 0x19 0x1a 0x1b 0x1c* 0x0b 0x14 0x15 0x16 0x17
Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital
PCM: rates 0x160, bits 0x1e, types 0x1
Connection: 1
0x1f
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x23, nsteps=0x41, stepsize=0x03, mute=1
Amp-In vals: 0xa3 0xa3
Connection: 8
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15
Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: 0x00 0x00
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: 0x40 0x40
Connection: 2
0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: 0x00 0x00
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: 0x40 0x40
Connection: 2
0x03 0x0b
Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: 0x00 0x00
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: 0x40 0x40
Connection: 2
0x04 0x0b
Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: 0x00 0x00
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: 0x40 0x40
Connection: 2
0x05 0x0b
Node 0x10 [Audio Selector] wcaps 0x300101: Stereo
Connection: 4
0x0c* 0x0d 0x0e 0x0f
Node 0x11 [Audio Selector] wcaps 0x300101: Stereo
Connection: 4
0x0c* 0x0d 0x0e 0x0f
Node 0x12 [Audio Selector] wcaps 0x300101: Stereo
Connection: 4
0x0c* 0x0d 0x0e 0x0f
Node 0x13 [Audio Selector] wcaps 0x300101: Stereo
Connection: 4
0x0c* 0x0d 0x0e 0x0f
Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: 0x00 0x00
Pincap 0x083f: IN OUT HP
Pin Default 0x01014020: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Green
Pin-ctls: 0x40: OUT
Connection: 1
0x0c
Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: 0x00 0x00
Pincap 0x083f: IN OUT HP
Pin Default 0x01014021: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Green
Pin-ctls: 0x40: OUT
Connection: 1
0x0d
Node 0x16 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: 0x00 0x00
Pincap 0x083f: IN OUT HP
Pin Default 0x01019022: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Pink
Pin-ctls: 0x40: OUT
Connection: 1
0x0e
Node 0x17 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: 0x80 0x80
Pincap 0x083f: IN OUT HP
Pin Default 0x01013023: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Blue
Pin-ctls: 0x40: OUT
Connection: 1
0x0f
Node 0x18 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: 0x80 0x80
Pincap 0x08133f: IN OUT HP
Pin Default 0x01a19031: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
Pin-ctls: 0x20: IN
Connection: 1
0x10
Node 0x19 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: 0x80 0x80
Pincap 0x08133f: IN OUT HP
Pin Default 0x02a19060: [Jack] Mic at Ext Front
Conn = 1/8, Color = Pink
Pin-ctls: 0x20: IN
Connection: 1
0x11
Node 0x1a [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: 0x80 0x80
Pincap 0x08133f: IN OUT HP
Pin Default 0x01813030: [Jack] Line In at Ext Rear
Conn = 1/8, Color = Blue
Pin-ctls: 0x20: IN
Connection: 1
0x12
Node 0x1b [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: 0x00 0x00
Pincap 0x08133f: IN OUT HP
Pin Default 0x02214050: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Green
Pin-ctls: 0x40: OUT
Connection: 1
0x13
Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x9933f170: [Fixed] CD at Int ATAPI
Conn = ATAPI, Color = Other
Pin-ctls: 0x00:
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
Pincap 0x0820: IN
Pin Default 0x99f3f180: [Fixed] Other at Int ATAPI
Conn = ATAPI, Color = Other
Pin-ctls: 0x00:
Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital
Pincap 0x0810: OUT
Pin Default 0x01442100: [Jack] SPDIF Out at Ext Rear
Conn = RCA, Color = Grey
Pin-ctls: 0x00:
Connection: 1
0x06
Node 0x1f [Pin Complex] wcaps 0x400200: Mono Digital
Pincap 0x0820: IN
Pin Default 0x01c42110: [Jack] SPDIF In at Ext Rear
Conn = RCA, Color = Grey
Pin-ctls: 0x00:
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Node 0x21 [Volume Knob Widget] wcaps 0x600080: Mono
Thanks for your help
Goodbye
--
spiral
Le Jeudi 12 Mai 2005 17:45, alsa-devel-request@lists.sourceforge.net a écrit :
> Date: Thu, 12 May 2005 16:25:02 +0200
> From: Takashi Iwai <tiwai@suse.de>
> To: fab <fab@gnux.info>
> Cc: alsa-devel@lists.sourceforge.net
> Subject: Re: [Alsa-devel] Medion + intel hda tests
>
> At Wed, 11 May 2005 00:02:38 +0200,
>
> fab wrote:
> > Hi,
> > since I reported bugs as well as I can and gave no answers,
>
> Since I've been in vacation and had no net access ;);)
>
> > I started to
> > do some very basic tests and sourcecode reading.
> > I tried to modprobe snd-hda-intel with different "model" option and then
> > tested all the outputs, I only marked the working ones :
> >
> > Availables inputs:
> > [front] [surround] [center] , [headphone]
> > tested model :
> > 3stack : front
> > 3stack-digout : front
> > 5stack : front
> > 5stack-digout : front
> > w810 : front surround
>
> This implies that the pin assignment is different from what the normal
> models suppose.
>
> I added the "test" model for debugging such cases to ALSA CVS.
> Try ALSA CVS version (driver and lib), and set "model=test" module
> option to snd-hda-intel module. Then you'll have fully controllable
> volumes and switches.
>
> The noisy output may be fixed by setting "position_fix=1" or
> "position_fix=2" module option.
>
> Anyway, please show the content of /proc/asound/card0/codec#* file.
>
>
> Takashi
-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes
Want to be the first software developer in space?
Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_ids93&alloc_id\x16281&op=click
next parent reply other threads:[~2005-05-12 20:46 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20050512154727.B414212F1B@sc8-sf-spam2.sourceforge.net>
2005-05-12 20:46 ` spiral [this message]
2005-05-13 7:36 ` Re: Alsa-devel digest, Vol 1 #3297 - 13 msgs Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200505122246.08566.spiral@laposte.net \
--to=spiral@laposte.net \
--cc=alsa-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.