Re: Re: au88x0_synth

[Alien <alien999999999@users.sourceforge.net>]

[-- Attachment #1: Type: text/plain, Size: 2866 bytes --]

Op zaterdag 14 mei 2005 10:12, schreef Raymond:
> Would you post the result of "more
> /proc/asound/au8810/codec97#0/ac97#0-0+regs" ?
>
> http://www.wolfsonmicro.com/products/digital_audio/ac97/WM9701/
>
> Unless ALSA mis-identify the AC97 codec on your au8810, WM9701A is a
> stereo codec
>
> Do alsamixer or windows driver told you that your card has "4 speakers
> mode" or your card has out1,out2 jacks and coaxial SPDIF ?

I have no windows or a 32bit OS. the card manual told me it had a 4 speaker 
and stereo mode, i never used the 4 speaker mode, so I can't be sure of 
anything like that. I'll try and look for the card manual some time.

I'd like to have other stuff fixed first, if you don't mind, my volume is 
randomly changing at certain points (the 32bit compile didn't have that) and 
sometimes the audio modules hang (since that patch, i haven't had that 
problem anymore).

furthermore, i notice that I can't choose between 41000 and 48000 Hz anymore 
in alsamixer, and that the equalizer sliders look odd (though i never used 
them). i can tell you only what changed versus the 32bit mode, and 
with/without the patch.

i got the vortex reg error in the 32bit version too. and i never had a 
problem.

> http://www.watch.impress.co.jp/akiba/hotline/991106/newitem.html#19
>
>
> EN_CODEC0 - enable the front channels of au88x0 to ac97 codec
>
> EN_CODEC1 - enable the rear channels of au88x0 to ac97 codec
>
> Alien wrote:
> > Op vrijdag 13 mei 2005 16:05, schreef Raymond:
> >>It is abnormal to get the message "vortex: reg error" on your au8810, it
> >>does not appear in my au8830.
> >>
> >>http://savannah.nongnu.org/support/?func=detailitem&item_id=102951
> >>
> >>You will need to find out the code which cause "vortex: reg error".
> >
> > if i have some time, i will try it...
> >
> >>You may try the following:
> >>
> >>1) Remove code relating to SPDIF ( only SQ1500 and au8830 has SPDIF )
> >>
> >>2) use hwwrite(vortex->mmio, VORTEX_CODEC_EN,
> >>hwread(vortex->mmio, VORTEX_CODEC_EN) | EN_CODEC0);
> >>
> >>No need to use (EN_CODEC0 | EN_CODEC1 ) since your au8810 only has
> >>stereo codec.
> >
> > you sure about that, the card told me it had stereo and 4 speaker mode?
> > or are we talking about different stuff?
> >
> >>>>Use alsamixer to find out which ac97 codec on your au8810.
> >>>
> >>>chip: Wolfson WM9701A
>
> -------------------------------------------------------
> This SF.Net email is sponsored by Oracle Space Sweepstakes
> Want to be the first software developer in space?
> Enter now for the Oracle Space Sweepstakes!
> http://ads.osdn.com/?ad_id=7393&alloc_id=16281&op=click
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/alsa-devel

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]