From: Jon Mason <jdmason@us.ibm.com>
To: "Catalin(ux aka Dino) BOIE" <util@deuroconsult.ro>
Cc: netdev@oss.sgi.com, davem@davemloft.net
Subject: Re: [PATCH] [BRIDGE] Set features based on slave's ones (was Ethernet Bridging: Enable Hardware Checksumming)
Date: Thu, 19 May 2005 14:00:32 -0500 [thread overview]
Message-ID: <20050519190032.GA19620@us.ibm.com> (raw)
In-Reply-To: <Pine.LNX.4.62.0505192019090.8076@webhosting.rdsbv.ro>
I combined my previous patch with your patch, and came up with the
following. I have tested it on my system, and it works exactly the way
I wanted. What do you think?
Thanks,
Jon
Signed-off-by: Catalin(ux aka Dino) BOIE <catab at umbrella.ro>
Signed-off-by: Jon Mason <jdmason@us.ibm.com>
--- linux-2.6.11-xenU/net/bridge/br_private.h 2005-03-02 01:37:50.000000000 -0600
+++ linux-2.6.11-xen0/net/bridge/br_private.h 2005-05-19 08:12:23.000000000 -0500
@@ -27,6 +27,10 @@
#define BR_PORT_BITS 10
#define BR_MAX_PORTS (1<<BR_PORT_BITS)
+#define BR_FEAT_MASK (NETIF_F_HW_CSUM | NETIF_F_SG \
+ | NETIF_F_FRAGLIST | NETIF_F_IP_CSUM \
+ | NETIF_F_HIGHDMA | NETIF_F_TSO)
+
typedef struct bridge_id bridge_id;
typedef struct mac_addr mac_addr;
typedef __u16 port_id;
--- linux-2.6.11-xenU/net/bridge/br_device.c 2005-05-19 06:19:42.000000000 -0500
+++ linux-2.6.11-xen0/net/bridge/br_device.c 2005-05-19 08:11:19.000000000 -0500
@@ -107,4 +107,5 @@ void br_dev_setup(struct net_device *dev
dev->tx_queue_len = 0;
dev->set_mac_address = NULL;
dev->priv_flags = IFF_EBRIDGE;
+ dev->features = BR_FEAT_MASK;
}
--- linux-2.6.11-xenU/net/bridge/br_if.c 2005-05-19 08:43:03.000000000 -0500
+++ linux-2.6.11-xen0/net/bridge/br_if.c 2005-05-19 08:43:58.000000000 -0500
@@ -314,6 +314,27 @@ int br_min_mtu(const struct net_bridge *
return mtu;
}
+/*
+ * If slave device (@dev) doesn't support special features,
+ * turn them off globally.
+ */
+static inline void br_features_change(struct net_bridge *br, struct net_device *dev)
+{
+ br->dev->features &= dev->features | NETIF_F_HW_CSUM | NETIF_F_SG;
+}
+
+/*
+ * Recomputes features using slave's features
+ */
+static void br_features_recompute(struct net_bridge *br)
+{
+ struct net_bridge_port *p;
+
+ br->dev->features = BR_FEAT_MASK;
+ list_for_each_entry(p, &br->port_list, list)
+ br_features_change(br, p->dev);
+}
+
/* called with RTNL */
int br_add_if(struct net_bridge *br, struct net_device *dev)
{
@@ -332,6 +353,8 @@ int br_add_if(struct net_bridge *br, str
if (IS_ERR(p = new_nbp(br, dev, br_initial_port_cost(dev))))
return PTR_ERR(p);
+ br_features_change(br, dev);
+
if ((err = br_fdb_insert(br, p, dev->dev_addr, 1)))
destroy_nbp(p);
@@ -368,6 +391,7 @@ int br_del_if(struct net_bridge *br, str
spin_lock_bh(&br->lock);
br_stp_recalculate_bridge_id(br);
+ br_features_recompute(br);
spin_unlock_bh(&br->lock);
return 0;
next prev parent reply other threads:[~2005-05-19 19:00 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-05-19 15:28 [PATCH] [BRIDGE] Set features based on slave's ones (was Ethernet Bridging: Enable Hardware Checksumming) Catalin(ux aka Dino) BOIE
2005-05-19 15:59 ` Nivedita Singhvi
2005-05-19 18:52 ` [PATCH] [BRIDGE] Set features based on slave's ones David S. Miller
2005-05-19 16:06 ` [PATCH] [BRIDGE] Set features based on slave's ones (was Ethernet Bridging: Enable Hardware Checksumming) Jon Mason
2005-05-19 17:22 ` Catalin(ux aka Dino) BOIE
2005-05-19 17:47 ` Jon Mason
2005-05-19 18:58 ` [PATCH] [BRIDGE] Set features based on slave's ones David S. Miller
2005-05-19 19:07 ` Jon Mason
2005-05-19 19:00 ` Jon Mason [this message]
2005-05-19 19:21 ` David S. Miller
2005-05-19 20:20 ` Jon Mason
2005-05-19 18:53 ` David S. Miller
2005-05-19 20:39 ` [PATCH] [BRIDGE] Set features based on slave's ones (was Ethernet Bridging: Enable Hardware Checksumming) Stephen Hemminger
2005-05-19 21:20 ` Stephen Hemminger
2005-05-19 21:40 ` Jon Mason
2005-05-20 6:07 ` Catalin(ux aka Dino) BOIE
2005-05-20 18:54 ` Jon Mason
2005-05-23 9:39 ` Catalin(ux aka Dino) BOIE
2005-05-23 9:40 ` Catalin(ux aka Dino) BOIE
2005-05-23 19:14 ` Jon Mason
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050519190032.GA19620@us.ibm.com \
--to=jdmason@us.ibm.com \
--cc=davem@davemloft.net \
--cc=netdev@oss.sgi.com \
--cc=util@deuroconsult.ro \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.