From: Bernhard Rosenkraenzer <bero@arklinux.org>
To: linux-kernel@vger.kernel.org
Subject: 2.6.12-rc5-mm2: Problems with USB storage
Date: Sat, 4 Jun 2005 23:16:27 +0200 [thread overview]
Message-ID: <200506042316.27615.bero@arklinux.org> (raw)
Trying to use an USB 5-in-1 card reader that worked well last time I checked
(2.6.10-mm2) with 2.6.12-rc5-mm2 results in:
usb 2-1: new full speed USB device using uhci_hcd and address 3
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
Vendor: Generic Model: STORAGE DEVICE Rev: 9135
Type: Direct-Access ANSI SCSI revision: 00
usbcore: deregistering driver usb-storage
scsi: Device offlined - not ready after error recovery: host 1 channel 0 id 0
lun 0
scsi1 (0:0): rejecting I/O to offline device
scsi1 (0:0): rejecting I/O to offline device
scsi1 (0:0): rejecting I/O to offline device
sda : READ CAPACITY failed.
sda : status=0, message=00, host=5, driver=04
sda : sense not available.
scsi1 (0:0): rejecting I/O to offline device
sda: Write Protect is off
sda: Mode Sense: 00 00 00 00
sda: assuming drive cache: write through
Trying to remove usb-storage (in an attempt to re-load it) Oopses:
Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
usb-storage: device scan complete
BUG: atomic counter underflow at:
[<c01c985a>] kref_put+0x4f/0xa1
[<c01c8d1c>] unlink+0x29/0x2e
[<c01c8c49>] kobject_put+0x1e/0x22
[<c01c8ce9>] kobject_release+0x0/0xa
[<e086c85a>] scsi_remove_device+0x87/0xc0 [scsi_mod]
[<e086cb98>] __scsi_remove_target+0x70/0x8a [scsi_mod]
[<e086bb2f>] scsi_forget_host+0x2b/0x46 [scsi_mod]
[<e0864eec>] scsi_remove_host+0x12/0x10d [scsi_mod]
[<c01172e5>] default_wake_function+0x0/0x18
[<e0d7aa08>] storage_disconnect+0x62/0x7e [usb_storage]
[<e0d02207>] usb_unbind_interface+0x78/0x7a [usbcore]
[<c0228600>] __device_release_driver+0x82/0x84
[<c022868f>] driver_detach+0x62/0x64
[<e0d817c4>] usb_stor_exit+0x0/0x2e [usb_storage]
[<c0228085>] bus_remove_driver+0x3b/0xb2
[<e0d817c4>] usb_stor_exit+0x0/0x2e [usb_storage]
[<c02288a1>] driver_unregister+0x10/0x1c
[<e0d02317>] usb_deregister+0x34/0x42 [usbcore]
[<e0d817d3>] usb_stor_exit+0xf/0x2e [usb_storage]
[<c0131f55>] sys_delete_module+0x18a/0x1ee
[<c0102d73>] sysenter_past_esp+0x54/0x75
Unable to handle kernel paging request at virtual address 766f6d65
printing eip:
e086cb6b
*pde = 00000000
Oops: 0000 [#1]
Modules linked in: sr_mod ide_cd cdrom vfat fat eeprom i2c_sensor radeon drm
i2c_algo_bit i2c_core intel_agp agpgart snd_intel8x0 snd_via82xx gameport
snd_ac97_codec ac97_bus snd_pcm snd_timer snd_page_alloc snd_mpu401_uart
snd_rawmidi snd_seq_device snd soundcore psmouse evdev binfmt_misc md5 ipv6
pcmcia firmware_class yenta_socket rsrc_nonstatic pcmcia_core 8139too mii
af_packet sd_mod tcp_bic ohci1394 ieee1394 usb_storage scsi_mod ehci_hcd
uhci_hcd usbcore video thermal processor fan container button battery ac rtc
CPU: 0
EIP: 0060:[<e086cb6b>] Not tainted VLI
EFLAGS: 00010002 (2.6.12-0.rc5.3ark)
EIP is at __scsi_remove_target+0x43/0x8a [scsi_mod]
eax: 00000000 ebx: 766f6d5d ecx: 00000286 edx: 766f6d5d
esi: dad4fc00 edi: d78a7800 ebp: e0d87f08 esp: dd07fe2c
ds: 007b es: 007b ss: 0068
Process rmmod (pid: 3611, threadinfo=dd07f000 task=d745b030)
Stack: c5fa3c00 00000282 c78db800 dad4fc08 e086bb2f d78a7800 dad4fe50 dad4fc00
e0d87ec0 e0864eec dad4fc00 00000001 00000000 00000000 dad4fe58 00000292
00000001 d745b030 c01172e5 00100100 00200200 00000286 e0d87ec0 dd07fea4
Call Trace:
[<e086bb2f>] scsi_forget_host+0x2b/0x46 [scsi_mod]
[<e0864eec>] scsi_remove_host+0x12/0x10d [scsi_mod]
[<c01172e5>] default_wake_function+0x0/0x18
[<e0d7aa08>] storage_disconnect+0x62/0x7e [usb_storage]
[<e0d02207>] usb_unbind_interface+0x78/0x7a [usbcore]
[<c0228600>] __device_release_driver+0x82/0x84
[<c022868f>] driver_detach+0x62/0x64
[<e0d817c4>] usb_stor_exit+0x0/0x2e [usb_storage]
[<c0228085>] bus_remove_driver+0x3b/0xb2
[<e0d817c4>] usb_stor_exit+0x0/0x2e [usb_storage]
[<c02288a1>] driver_unregister+0x10/0x1c
[<e0d02317>] usb_deregister+0x34/0x42 [usbcore]
[<e0d817d3>] usb_stor_exit+0xf/0x2e [usb_storage]
[<c0131f55>] sys_delete_module+0x18a/0x1ee
[<c0102d73>] sysenter_past_esp+0x54/0x75
Code: 89 1c 24 e8 70 83 ff ff 85 c0 74 eb 8d b3 20 ff ff ff 9c 59 fa 83 87 14
01 00 00 01 8b 06 8d 50 f8 8b 5a 08 83 eb 08 eb 0b 89 da <8b> 5b 08 83 eb 08
8d 42 08 39 f0 74 29 8b 87 18 01 00 00 39 42
reply other threads:[~2005-06-04 21:16 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200506042316.27615.bero@arklinux.org \
--to=bero@arklinux.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.