From: Denis Zaitsev <zzz@anda.ru>
To: linux-kernel@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Subject: [PROBLEM] aic7xxx: DV failed to configure device
Date: Mon, 6 Jun 2005 14:16:38 +0600 [thread overview]
Message-ID: <20050606141638.A28532@ward.six> (raw)
I'm testing an Adaptec SCSI controller + an IBM drive. All the things
used to be fine before I had made the low-level format of the drive
(thru the Ctrl-A Adaptec's menu). And now after
modprobe aic7xxx
I have:
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec 29160 Ultra160 SCSI adapter>
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsi0:A:0:0: DV failed to configure device. Please file a bug report against this driver.
(scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
Vendor: IBM Model: DDYS-T09170N Rev: S80D
Type: Direct-Access ANSI SCSI revision: 03
scsi0:A:0:0: Tagged Queuing enabled. Depth 32
SCSI device sda: 17916240 512-byte hdwr sectors (9173 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 17916240 512-byte hdwr sectors (9173 MB)
SCSI device sda: drive cache: write back
sda: unknown partition table
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
The message
scsi0:A:0:0: DV failed to configure device. Please file a bug report against this driver.
had never appeared before the low-level format. But it seems that
after the format the drive still works fine.
So, what does this message mean? And can I just ignore it?
Some additional info: it's the PCI64 card installed in a 32-bit PCI
slot, Domain Validation is turned on thru the Adaptec BIOS setup.
Thanks in advance.
next reply other threads:[~2005-06-06 8:16 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-06-06 8:16 Denis Zaitsev [this message]
2005-06-06 8:19 ` [PROBLEM] aic7xxx: DV failed to configure device Arjan van de Ven
2005-06-06 9:03 ` Denis Zaitsev
2005-06-06 14:34 ` James Bottomley
2005-06-07 13:16 ` Denis Zaitsev
2005-06-07 16:37 ` James Bottomley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050606141638.A28532@ward.six \
--to=zzz@anda.ru \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.