Re: kaweth fails to work on 2.6.12-rc[56]

[Wakko Warner <wakko@animx.eu.org>]

Oliver Neukum wrote:
> Am Samstag, 11. Juni 2005 06:11 schrieb Wakko Warner:
> > Oliver Neukum wrote:
> > > Sorry, I should be more specific. It will print out the error codes
> > > internal to the USB layer which are meaningful even if interrupts are shared.
> > > Also, are you seeing tx errors in the error count?
> > 
> > Unless I did something wrong, it's apparently not in the USB subsystem.
> > 
> > I have 2.6.12-rc3 and rc4 compiled.  Same config file on a test system.
> > again, rc3 works, rc4 does not.  I booted rc3 and force loaded the usb
> > modules from rc4 into rc3.  It tainted the kernel, but it worked.
> > 
> > I booted into rc4.  I do have ACPI compiled so I added acpi=off.  This did
> > not work, same problem as before.  I left a ping running, the usb controller
> > was on IRQ 9.  The test system is an old NEC notebook with an Intel chipset
> > (thus uhci-hcd usb1.1).  I plugged in a Belkin USB2.0 cardbus card (USB1.1
> > is serviced by ohci-hcd) and plugged the ethernet adapter into that.  Same
> > problem.
> 
> Do you see tx errors?

No.  Oh oops I forgot to say the ping caused the interrupts to increase.
ifconfig showed 1 packet sent but never went up.

-- 
 Lab tests show that use of micro$oft causes cancer in lab animals