From: Gerhard Jaeger <g.jaeger@sysgo.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] Marvell 88E1111 PHY
Date: Wed, 15 Jun 2005 12:10:46 +0200 [thread overview]
Message-ID: <200506151210.46133.g.jaeger@sysgo.com> (raw)
In-Reply-To: <000801c57190$e899f3c0$f201a8c0@SN7606>
On Wednesday 15 June 2005 11:59, David Grab wrote:
> Hello,
>
> my u-boot is now booting from flash. Big thanks to everyone helped me. ;-)
>
> But now i am configuring ethernet in u-boot for my 440GX Board. It uses
> Marvel 88E1111 PHY?s. Did someone worked with this PHY and u-boot or knows
> if it is supported?
>
> config file definitions:
>
> #define CONFIG_MII 1 /* MII PHY management */
> #define CONFIG_PHY_ADDR 0x5 /* PHY address, See schematics */
> #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
> #define CONFIG_NETMASK 255.255.252.0
> #define CONFIG_IPADDR 192.168.0.116
> #define CONFIG_ETHADDR 00:04:AC:E3:28:8A
>
> #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
> CFG_CMD_IRQ | \
> CFG_CMD_I2C | \
> CFG_CMD_BEDBUG | \
> CFG_CMD_ENV | \
> CFG_CMD_MII | \
> CFG_CMD_DIAG | \
> CFG_CMD_PING | \
> CFG_CMD_NET | \
> CFG_CMD_ELF )
>
> Thanks for any help,
>
Hi,
I know, that the MPC85xx CPU specific part contains support for the Marvel 88E1111,
check the file tsec.c in u-boot/cpu/mpc85xx
Hope this help
Gerhard
--
Gerhard Jaeger <gjaeger@sysgo.com>
SYSGO AG Embedded and Real-Time Software
www.sysgo.com | www.elinos.com | www.pikeos.com | www.osek.de
next prev parent reply other threads:[~2005-06-15 10:10 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-06-15 9:59 [U-Boot-Users] Marvell 88E1111 PHY David Grab
2005-06-15 10:10 ` Gerhard Jaeger [this message]
2005-06-15 19:14 ` Kylo Ginsberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200506151210.46133.g.jaeger@sysgo.com \
--to=g.jaeger@sysgo.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.