From: Nick Warne <nick@linicks.net>
To: linux-kernel@vger.kernel.org
Subject: Re: 2 errors in 2.6.12
Date: Sun, 19 Jun 2005 12:25:50 +0100 [thread overview]
Message-ID: <200506191225.50522.nick@linicks.net> (raw)
In-Reply-To: <200506191104.28900.nick@linicks.net>
On Sunday 19 June 2005 11:04, you wrote:
> >and my SBLive! plays only on 2 repros Front left and right.
>
> Yes - I noticed something with my SB Live. I thought it was me, but going
> through everythnig this morning, I don't think it is.
>
> From 2.6.11.12 dmesg:
>
> Jun 17 18:39:45 linuxamd kernel: Advanced Linux Sound Architecture Driver
> Version 1.0.8 (Thu Jan 13 09:39:32 2005 UTC).
> Jun 17 18:39:45 linuxamd kernel: ACPI: PCI interrupt 0000:00:0f.0[A] -> GSI
> 5 (level, low) -> IRQ 5
> Jun 17 18:39:45 linuxamd kernel: ALSA device list:
> Jun 17 18:39:45 linuxamd kernel: #0: Sound Blaster Live! (rev.7,
> serial:0x80611102) at 0xe000, irq 5
>
> And here from new 2.6.12 dmesg:
>
> Jun 18 15:27:41 linuxamd kernel: Advanced Linux Sound Architecture Driver
> Version 1.0.9rc2 (Thu Mar 24 10:33:39 2005 UTC).
> Jun 18 15:27:41 linuxamd kernel: PCI: Found IRQ 5 for device 0000:00:0f.0
> Jun 18 15:27:41 linuxamd kernel: ALSA device list:
> Jun 18 15:27:41 linuxamd kernel: #0: SB Live [Unknown] (rev.7,
> serial:0x80611102) at 0xe000, irq 5
OK, I have found out why - an alsa-devel patch changed to be more specific on
the chipset/model - more here:
http://marc.theaimsgroup.com/?l=linux-kernel&m=111209948526203&w=2
It turns out my card isn't in the ID list, so it gets given an 'unknown'. As
this changed from 2.6.11.12, alsamixer then reset (effectively a new card!)
so I had to reset all my mixer settings again - I would look at your mixer
settings for the surround sound settings (mute etc.).
Here is a page with the ID and chipsets of the cards:
http://www.digit-life.com/articles/livetolive51/
I am going to attempt to add my card into emu10k1_main.c to get it set right:
0 [Unknown ]: EMU10K1 - SB Live [Unknown]
SB Live [Unknown] (rev.7, serial:0x80611102) at 0xe000,
irq 5
>From that 'livetolive51' page I am told I have:
SB0060 - SBlive! Value (PCI\VEN_1102&DEV_0002&SUBSYS_80611102)
Nick
--
"When you're chewing on life's gristle,
Don't grumble, Give a whistle..."
next prev parent reply other threads:[~2005-06-19 11:26 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-06-19 10:04 2 errors in 2.6.12 Nick Warne
2005-06-19 11:25 ` Nick Warne [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-06-19 14:07 Nick Warne
2005-06-19 7:57 Michal Semler
[not found] ` <20050728214851.44877164.akpm@osdl.org>
2005-07-31 11:51 ` Michal Semler
2005-07-31 17:31 ` Andrew Morton
2005-07-31 17:53 ` Michael Krufky
2005-08-01 9:16 ` CIJOML
[not found] ` <1122894516.5340.9.camel@pc08.localdom.local>
[not found] ` <20050801201017.G77710@nebuchadnezzar.smejdil.cz>
2005-08-01 19:55 ` hermann pitton
2005-08-01 20:02 ` Michael Krufky
2005-08-01 18:03 ` CIJOML
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200506191225.50522.nick@linicks.net \
--to=nick@linicks.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.