Re: 2.6.12-mm1

[Andy Whitcroft <apw@shadowen.org>]

Having trouble getting 2.6.12-mm1 to compile on my x86 test
boxes other than a basic PC.  I suspect this patch is to 'blame'.

> +gregkh-pci-pci-assign-unassigned-resources.patch

We seem to need to include setup-bus.o for most x86 architectures
regardless of HOTPLUG.  Not sure if this is the right fix, but it
seems to work on the systems I have tested.

-apw

=== 8< ===
It seems that X86 architectures in general need the setup-bus.o
not just those with HOTPLUG.  This avoids the following error on
X86_NUMAQ and x86_64:

    arch/i386/pci/built-in.o(.init.text+0x15a6): In function `pcibios_init':
    : undefined reference to `pci_assign_unassigned_resources'

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
---
 Makefile |    1 +
 1 files changed, 1 insertion(+)
diff -upN reference/drivers/pci/Makefile current/drivers/pci/Makefile
--- reference/drivers/pci/Makefile
+++ current/drivers/pci/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_HOTPLUG_PCI) += hotplug/
 #
 # Some architectures use the generic PCI setup functions
 #
+obj-$(CONFIG_X86) += setup-bus.o
 obj-$(CONFIG_ALPHA) += setup-bus.o setup-irq.o
 obj-$(CONFIG_ARM) += setup-bus.o setup-irq.o
 obj-$(CONFIG_PARISC) += setup-bus.o