[DVB patch 15/51] add Pluto2 driver

[Johannes Stezenbach <js@linuxtv.org>]

[-- Attachment #1: dvb-add-pluto2-driver.patch --]
[-- Type: text/plain, Size: 23735 bytes --]

From: Andreas Oberritter <obi@linuxtv.org>

Add driver for the Satelco Easywatch Mobile DVB-T card (based on Pluto2 chip).

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>

 drivers/media/dvb/Kconfig         |    4 
 drivers/media/dvb/Makefile        |    2 
 drivers/media/dvb/pluto2/Kconfig  |   16 
 drivers/media/dvb/pluto2/Makefile |    3 
 drivers/media/dvb/pluto2/pluto2.c |  807 ++++++++++++++++++++++++++++++++++++++
 5 files changed, 831 insertions(+), 1 deletion(-)

Index: linux-2.6.12-git8/drivers/media/dvb/Makefile
===================================================================
--- linux-2.6.12-git8.orig/drivers/media/dvb/Makefile	2005-06-27 13:18:22.000000000 +0200
+++ linux-2.6.12-git8/drivers/media/dvb/Makefile	2005-06-27 13:23:09.000000000 +0200
@@ -2,4 +2,4 @@
 # Makefile for the kernel multimedia device drivers.
 #
 
-obj-y        := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/ cinergyT2/ dvb-usb/
+obj-y        := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/ cinergyT2/ dvb-usb/ pluto2/
Index: linux-2.6.12-git8/drivers/media/dvb/Kconfig
===================================================================
--- linux-2.6.12-git8.orig/drivers/media/dvb/Kconfig	2005-06-27 13:18:22.000000000 +0200
+++ linux-2.6.12-git8/drivers/media/dvb/Kconfig	2005-06-27 13:23:09.000000000 +0200
@@ -40,6 +40,10 @@ comment "Supported BT878 Adapters"
 	depends on DVB_CORE && PCI
 source "drivers/media/dvb/bt8xx/Kconfig"
 
+comment "Supported Pluto2 Adapters"
+	depends on DVB_CORE && PCI
+source "drivers/media/dvb/pluto2/Kconfig"
+
 comment "Supported DVB Frontends"
 	depends on DVB_CORE
 source "drivers/media/dvb/frontends/Kconfig"
Index: linux-2.6.12-git8/drivers/media/dvb/pluto2/pluto2.c
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.12-git8/drivers/media/dvb/pluto2/pluto2.c	2005-06-27 13:23:09.000000000 +0200
@@ -0,0 +1,807 @@
+/*
+ * pluto2.c - Satelco Easywatch Mobile Terrestrial Receiver [DVB-T]
+ *
+ * Copyright (C) 2005 Andreas Oberritter <obi@linuxtv.org>
+ *
+ * based on pluto2.c 1.10 - http://instinct-wp8.no-ip.org/pluto/
+ * 	by Dany Salman <salmandany@yahoo.fr>
+ *	Copyright (c) 2004 TDF
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include "demux.h"
+#include "dmxdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+#include "dvbdev.h"
+#include "tda1004x.h"
+
+#define DRIVER_NAME		"pluto2"
+
+#define REG_PIDn(n)		((n) << 2)	/* PID n pattern registers */
+#define REG_PCAR		0x0020		/* PC address register */
+#define REG_TSCR		0x0024		/* TS ctrl & status */
+#define REG_MISC		0x0028		/* miscellaneous */
+#define REG_MMAC		0x002c		/* MSB MAC address */
+#define REG_IMAC		0x0030		/* ISB MAC address */
+#define REG_LMAC		0x0034		/* LSB MAC address */
+#define REG_SPID		0x0038		/* SPI data */
+#define REG_SLCS		0x003c		/* serial links ctrl/status */
+
+#define PID0_NOFIL		(0x0001 << 16)
+#define PIDn_ENP		(0x0001 << 15)
+#define PID0_END		(0x0001 << 14)
+#define PID0_AFIL		(0x0001 << 13)
+#define PIDn_PID		(0x1fff <<  0)
+
+#define TSCR_NBPACKETS		(0x00ff << 24)
+#define TSCR_DEM		(0x0001 << 17)
+#define TSCR_DE			(0x0001 << 16)
+#define TSCR_RSTN		(0x0001 << 15)
+#define TSCR_MSKO		(0x0001 << 14)
+#define TSCR_MSKA		(0x0001 << 13)
+#define TSCR_MSKL		(0x0001 << 12)
+#define TSCR_OVR		(0x0001 << 11)
+#define TSCR_AFUL		(0x0001 << 10)
+#define TSCR_LOCK		(0x0001 <<  9)
+#define TSCR_IACK		(0x0001 <<  8)
+#define TSCR_ADEF		(0x007f <<  0)
+
+#define MISC_DVR		(0x0fff <<  4)
+#define MISC_ALED		(0x0001 <<  3)
+#define MISC_FRST		(0x0001 <<  2)
+#define MISC_LED1		(0x0001 <<  1)
+#define MISC_LED0		(0x0001 <<  0)
+
+#define SPID_SPIDR		(0x00ff <<  0)
+
+#define SLCS_SCL		(0x0001 <<  7)
+#define SLCS_SDA		(0x0001 <<  6)
+#define SLCS_CSN		(0x0001 <<  2)
+#define SLCS_OVR		(0x0001 <<  1)
+#define SLCS_SWC		(0x0001 <<  0)
+
+#define TS_DMA_PACKETS		(8)
+#define TS_DMA_BYTES		(188 * TS_DMA_PACKETS)
+
+#define I2C_ADDR_TDA10046	0x10
+#define I2C_ADDR_TUA6034	0xc2
+#define NHWFILTERS		8
+
+struct pluto {
+	/* pci */
+	struct pci_dev *pdev;
+	u8 __iomem *io_mem;
+
+	/* dvb */
+	struct dmx_frontend hw_frontend;
+	struct dmx_frontend mem_frontend;
+	struct dmxdev dmxdev;
+	struct dvb_adapter dvb_adapter;
+	struct dvb_demux demux;
+	struct dvb_frontend *fe;
+	struct dvb_net dvbnet;
+	unsigned int full_ts_users;
+	unsigned int users;
+
+	/* i2c */
+	struct i2c_algo_bit_data i2c_bit;
+	struct i2c_adapter i2c_adap;
+	unsigned int i2cbug;
+
+	/* irq */
+	unsigned int overflow;
+
+	/* dma */
+	dma_addr_t dma_addr;
+	u8 dma_buf[TS_DMA_BYTES];
+	u8 dummy[4096];
+};
+
+static inline struct pluto *feed_to_pluto(struct dvb_demux_feed *feed)
+{
+	return container_of(feed->demux, struct pluto, demux);
+}
+
+static inline struct pluto *frontend_to_pluto(struct dvb_frontend *fe)
+{
+	return container_of(fe->dvb, struct pluto, dvb_adapter);
+}
+
+static inline u32 pluto_readreg(struct pluto *pluto, u32 reg)
+{
+	return readl(&pluto->io_mem[reg]);
+}
+
+static inline void pluto_writereg(struct pluto *pluto, u32 reg, u32 val)
+{
+	writel(val, &pluto->io_mem[reg]);
+}
+
+static inline void pluto_rw(struct pluto *pluto, u32 reg, u32 mask, u32 bits)
+{
+	u32 val = readl(&pluto->io_mem[reg]);
+	val &= ~mask;
+	val |= bits;
+	writel(val, &pluto->io_mem[reg]);
+}
+
+static void pluto_setsda(void *data, int state)
+{
+	struct pluto *pluto = data;
+
+	if (state)
+		pluto_rw(pluto, REG_SLCS, SLCS_SDA, SLCS_SDA);
+	else
+		pluto_rw(pluto, REG_SLCS, SLCS_SDA, 0);
+}
+
+static void pluto_setscl(void *data, int state)
+{
+	struct pluto *pluto = data;
+
+	if (state)
+		pluto_rw(pluto, REG_SLCS, SLCS_SCL, SLCS_SCL);
+	else
+		pluto_rw(pluto, REG_SLCS, SLCS_SCL, 0);
+
+	/* try to detect i2c_inb() to workaround hardware bug:
+	 * reset SDA to high after SCL has been set to low */
+	if ((state) && (pluto->i2cbug == 0)) {
+		pluto->i2cbug = 1;
+	} else {
+		if ((!state) && (pluto->i2cbug == 1))
+			pluto_setsda(pluto, 1);
+		pluto->i2cbug = 0;
+	}
+}
+
+static int pluto_getsda(void *data)
+{
+	struct pluto *pluto = data;
+
+	return pluto_readreg(pluto, REG_SLCS) & SLCS_SDA;
+}
+
+static int pluto_getscl(void *data)
+{
+	struct pluto *pluto = data;
+
+	return pluto_readreg(pluto, REG_SLCS) & SLCS_SCL;
+}
+
+static void pluto_reset_frontend(struct pluto *pluto, int reenable)
+{
+	u32 val = pluto_readreg(pluto, REG_MISC);
+
+	if (val & MISC_FRST) {
+		val &= ~MISC_FRST;
+		pluto_writereg(pluto, REG_MISC, val);
+	}
+	if (reenable) {
+		val |= MISC_FRST;
+		pluto_writereg(pluto, REG_MISC, val);
+	}
+}
+
+static void pluto_reset_ts(struct pluto *pluto, int reenable)
+{
+	u32 val = pluto_readreg(pluto, REG_TSCR);
+
+	if (val & TSCR_RSTN) {
+		val &= ~TSCR_RSTN;
+		pluto_writereg(pluto, REG_TSCR, val);
+	}
+	if (reenable) {
+		val |= TSCR_RSTN;
+		pluto_writereg(pluto, REG_TSCR, val);
+	}
+}
+
+static void pluto_set_dma_addr(struct pluto *pluto)
+{
+	pluto_writereg(pluto, REG_PCAR, cpu_to_le32(pluto->dma_addr));
+}
+
+static int __devinit pluto_dma_map(struct pluto *pluto)
+{
+	pluto->dma_addr = pci_map_single(pluto->pdev, pluto->dma_buf,
+			TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
+
+	return pci_dma_mapping_error(pluto->dma_addr);
+}
+
+static void pluto_dma_unmap(struct pluto *pluto)
+{
+	pci_unmap_single(pluto->pdev, pluto->dma_addr,
+			TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
+}
+
+static int pluto_start_feed(struct dvb_demux_feed *f)
+{
+	struct pluto *pluto = feed_to_pluto(f);
+
+	/* enable PID filtering */
+	if (pluto->users++ == 0)
+		pluto_rw(pluto, REG_PIDn(0), PID0_AFIL | PID0_NOFIL, 0);
+
+	if ((f->pid < 0x2000) && (f->index < NHWFILTERS))
+		pluto_rw(pluto, REG_PIDn(f->index), PIDn_ENP | PIDn_PID, PIDn_ENP | f->pid);
+	else if (pluto->full_ts_users++ == 0)
+		pluto_rw(pluto, REG_PIDn(0), PID0_NOFIL, PID0_NOFIL);
+
+	return 0;
+}
+
+static int pluto_stop_feed(struct dvb_demux_feed *f)
+{
+	struct pluto *pluto = feed_to_pluto(f);
+
+	/* disable PID filtering */
+	if (--pluto->users == 0)
+		pluto_rw(pluto, REG_PIDn(0), PID0_AFIL, PID0_AFIL);
+
+	if ((f->pid < 0x2000) && (f->index < NHWFILTERS))
+		pluto_rw(pluto, REG_PIDn(f->index), PIDn_ENP | PIDn_PID, 0x1fff);
+	else if (--pluto->full_ts_users == 0)
+		pluto_rw(pluto, REG_PIDn(0), PID0_NOFIL, 0);
+
+	return 0;
+}
+
+static void pluto_dma_end(struct pluto *pluto, unsigned int nbpackets)
+{
+	/* synchronize the DMA transfer with the CPU
+	 * first so that we see updated contents. */
+	pci_dma_sync_single_for_cpu(pluto->pdev, pluto->dma_addr,
+			TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
+
+	/* Workaround for broken hardware:
+	 * [1] On startup NBPACKETS seems to contain an uninitialized value,
+	 *     but no packets have been transfered.
+	 * [2] Sometimes (actually very often) NBPACKETS stays at zero
+	 *     although one packet has been transfered.
+	 */
+	if ((nbpackets == 0) || (nbpackets > TS_DMA_PACKETS)) {
+		unsigned int i = 0, valid;
+		while (pluto->dma_buf[i] == 0x47)
+			i += 188;
+		valid = i / 188;
+		if (nbpackets != valid) {
+			dev_err(&pluto->pdev->dev, "nbpackets=%u valid=%u\n",
+					nbpackets, valid);
+			nbpackets = valid;
+		}
+	}
+
+	dvb_dmx_swfilter_packets(&pluto->demux, pluto->dma_buf, nbpackets);
+
+	/* clear the dma buffer. this is needed to be able to identify
+	 * new valid ts packets above */
+	memset(pluto->dma_buf, 0, nbpackets * 188);
+
+	/* reset the dma address */
+	pluto_set_dma_addr(pluto);
+
+	/* sync the buffer and give it back to the card */
+	pci_dma_sync_single_for_device(pluto->pdev, pluto->dma_addr,
+			TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
+}
+
+static irqreturn_t pluto_irq(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct pluto *pluto = dev_id;
+	u32 tscr;
+
+	/* check whether an interrupt occured on this device */
+	tscr = pluto_readreg(pluto, REG_TSCR);
+	if (!(tscr & (TSCR_DE | TSCR_OVR)))
+		return IRQ_NONE;
+
+	if (tscr == 0xffffffff) {
+		// FIXME: maybe recover somehow
+		dev_err(&pluto->pdev->dev, "card hung up :(\n");
+		return IRQ_HANDLED;
+	}
+
+	/* dma end interrupt */
+	if (tscr & TSCR_DE) {
+		pluto_dma_end(pluto, (tscr & TSCR_NBPACKETS) >> 24);
+		/* overflow interrupt */
+		if (tscr & TSCR_OVR)
+			pluto->overflow++;
+		if (pluto->overflow) {
+			dev_err(&pluto->pdev->dev, "overflow irq (%d)\n",
+					pluto->overflow);
+			pluto_reset_ts(pluto, 1);
+			pluto->overflow = 0;
+		}
+	} else if (tscr & TSCR_OVR) {
+		pluto->overflow++;
+	}
+
+	/* ACK the interrupt */
+	pluto_writereg(pluto, REG_TSCR, tscr | TSCR_IACK);
+
+	return IRQ_HANDLED;
+}
+
+static void __devinit pluto_enable_irqs(struct pluto *pluto)
+{
+	u32 val = pluto_readreg(pluto, REG_TSCR);
+
+	/* set the number of packets */
+	val &= ~TSCR_ADEF;
+	val |= TS_DMA_PACKETS / 2;
+	/* disable AFUL and LOCK interrupts */
+	val |= (TSCR_MSKA | TSCR_MSKL);
+	/* enable DMA and OVERFLOW interrupts */
+	val &= ~(TSCR_DEM | TSCR_MSKO);
+	/* clear pending interrupts */
+	val |= TSCR_IACK;
+
+	pluto_writereg(pluto, REG_TSCR, val);
+}
+
+static void pluto_disable_irqs(struct pluto *pluto)
+{
+	u32 val = pluto_readreg(pluto, REG_TSCR);
+
+	/* disable all interrupts */
+	val |= (TSCR_DEM | TSCR_MSKO | TSCR_MSKA | TSCR_MSKL);
+	/* clear pending interrupts */
+	val |= TSCR_IACK;
+
+	pluto_writereg(pluto, REG_TSCR, val);
+}
+
+static int __devinit pluto_hw_init(struct pluto *pluto)
+{
+	pluto_reset_frontend(pluto, 1);
+
+	/* set automatic LED control by FPGA */
+	pluto_rw(pluto, REG_MISC, MISC_ALED, MISC_ALED);
+
+	/* set data endianess */
+#ifdef __LITTLE_ENDIAN
+	pluto_rw(pluto, REG_PIDn(0), PID0_END, PID0_END);
+#else
+	pluto_rw(pluto, REG_PIDn(0), PID0_END, 0);
+#endif
+	/* map DMA and set address */
+	pluto_dma_map(pluto);
+	pluto_set_dma_addr(pluto);
+
+	/* enable interrupts */
+	pluto_enable_irqs(pluto);
+
+	/* reset TS logic */
+	pluto_reset_ts(pluto, 1);
+
+	return 0;
+}
+
+static void pluto_hw_exit(struct pluto *pluto)
+{
+	/* disable interrupts */
+	pluto_disable_irqs(pluto);
+
+	pluto_reset_ts(pluto, 0);
+
+	/* LED: disable automatic control, enable yellow, disable green */
+	pluto_rw(pluto, REG_MISC, MISC_ALED | MISC_LED1 | MISC_LED0, MISC_LED1);
+
+	/* unmap DMA */
+	pluto_dma_unmap(pluto);
+
+	pluto_reset_frontend(pluto, 0);
+}
+
+static inline u32 divide(u32 numerator, u32 denominator)
+{
+	if (denominator == 0)
+		return ~0;
+
+	return (numerator + denominator / 2) / denominator;
+}
+
+/* LG Innotek TDTE-E001P (Infineon TUA6034) */
+static int lg_tdtpe001p_pll_set(struct dvb_frontend *fe,
+				struct dvb_frontend_parameters *p)
+{
+	struct pluto *pluto = frontend_to_pluto(fe);
+	struct i2c_msg msg;
+	int ret;
+	u8 buf[4];
+	u32 div;
+
+	// Fref = 166.667 Hz
+	// Fref * 3 = 500.000 Hz
+	// IF = 36166667
+	// IF / Fref = 217
+	//div = divide(p->frequency + 36166667, 166667);
+	div = divide(p->frequency * 3, 500000) + 217;
+	buf[0] = (div >> 8) & 0x7f;
+	buf[1] = (div >> 0) & 0xff;
+
+	if (p->frequency < 611000000)
+		buf[2] = 0xb4;
+	else if (p->frequency < 811000000)
+		buf[2] = 0xbc;
+	else
+		buf[2] = 0xf4;
+
+	// VHF: 174-230 MHz
+	// center: 350 MHz
+	// UHF: 470-862 MHz
+	if (p->frequency < 350000000)
+		buf[3] = 0x02;
+	else
+		buf[3] = 0x04;
+
+	if (p->u.ofdm.bandwidth == BANDWIDTH_8_MHZ)
+		buf[3] |= 0x08;
+
+	if (sizeof(buf) == 6) {
+		buf[4] = buf[2];
+		buf[4] &= ~0x1c;
+		buf[4] |=  0x18;
+
+		buf[5] = (0 << 7) | (2 << 4);
+	}
+
+	msg.addr = I2C_ADDR_TUA6034 >> 1;
+	msg.flags = 0;
+	msg.buf = buf;
+	msg.len = sizeof(buf);
+
+	ret = i2c_transfer(&pluto->i2c_adap, &msg, 1);
+	if (ret < 0)
+		return ret;
+	else if (ret == 0)
+		return -EREMOTEIO;
+
+	return 0;
+}
+
+static int pluto2_request_firmware(struct dvb_frontend *fe,
+				   const struct firmware **fw, char *name)
+{
+	struct pluto *pluto = frontend_to_pluto(fe);
+
+	return request_firmware(fw, name, &pluto->pdev->dev);
+}
+
+static struct tda1004x_config pluto2_fe_config __devinitdata = {
+	.demod_address = I2C_ADDR_TDA10046 >> 1,
+	.invert = 1,
+	.invert_oclk = 0,
+	.xtal_freq = TDA10046_XTAL_16M,
+	.agc_config = TDA10046_AGC_DEFAULT,
+	.if_freq = TDA10046_FREQ_3617,
+	.pll_set = lg_tdtpe001p_pll_set,
+	.pll_sleep = NULL,
+	.request_firmware = pluto2_request_firmware,
+};
+
+static int __devinit frontend_init(struct pluto *pluto)
+{
+	int ret;
+
+	pluto->fe = tda10046_attach(&pluto2_fe_config, &pluto->i2c_adap);
+	if (!pluto->fe) {
+		dev_err(&pluto->pdev->dev, "could not attach frontend\n");
+		return -ENODEV;
+	}
+
+	ret = dvb_register_frontend(&pluto->dvb_adapter, pluto->fe);
+	if (ret < 0) {
+		if (pluto->fe->ops->release)
+			pluto->fe->ops->release(pluto->fe);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void __devinit pluto_read_rev(struct pluto *pluto)
+{
+	u32 val = pluto_readreg(pluto, REG_MISC) & MISC_DVR;
+	dev_info(&pluto->pdev->dev, "board revision %d.%d\n",
+			(val >> 12) & 0x0f, (val >> 4) & 0xff);
+}
+
+static void __devinit pluto_read_mac(struct pluto *pluto, u8 *mac)
+{
+	u32 val = pluto_readreg(pluto, REG_MMAC);
+	mac[0] = (val >> 8) & 0xff;
+	mac[1] = (val >> 0) & 0xff;
+
+	val = pluto_readreg(pluto, REG_IMAC);
+	mac[2] = (val >> 8) & 0xff;
+	mac[3] = (val >> 0) & 0xff;
+
+	val = pluto_readreg(pluto, REG_LMAC);
+	mac[4] = (val >> 8) & 0xff;
+	mac[5] = (val >> 0) & 0xff;
+
+	dev_info(&pluto->pdev->dev, "MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
+			mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
+}
+
+static int __devinit pluto_read_serial(struct pluto *pluto)
+{
+	struct pci_dev *pdev = pluto->pdev;
+	unsigned int i, j;
+	u8 __iomem *cis;
+
+	cis = pci_iomap(pdev, 1, 0);
+	if (!cis)
+		return -EIO;
+
+	dev_info(&pdev->dev, "S/N ");
+
+	for (i = 0xe0; i < 0x100; i += 4) {
+		u32 val = readl(&cis[i]);
+		for (j = 0; j < 32; j += 8) {
+			if ((val & 0xff) == 0xff)
+				goto out;
+			printk("%c", val & 0xff);
+			val >>= 8;
+		}
+	}
+out:
+	printk("\n");
+	pci_iounmap(pdev, cis);
+
+	return 0;
+}
+
+static int __devinit pluto2_probe(struct pci_dev *pdev,
+				  const struct pci_device_id *ent)
+{
+	struct pluto *pluto;
+	struct dvb_adapter *dvb_adapter;
+	struct dvb_demux *dvbdemux;
+	struct dmx_demux *dmx;
+	int ret = -ENOMEM;
+
+	pluto = kmalloc(sizeof(struct pluto), GFP_KERNEL);
+	if (!pluto)
+		goto out;
+
+	memset(pluto, 0, sizeof(struct pluto));
+	pluto->pdev = pdev;
+
+	ret = pci_enable_device(pdev);
+	if (ret < 0)
+		goto err_kfree;
+
+	/* enable interrupts */
+	pci_write_config_dword(pdev, 0x6c, 0x8000);
+
+	ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+	if (ret < 0)
+		goto err_pci_disable_device;
+
+	pci_set_master(pdev);
+
+	ret = pci_request_regions(pdev, DRIVER_NAME);
+	if (ret < 0)
+		goto err_pci_disable_device;
+
+	pluto->io_mem = pci_iomap(pdev, 0, 0x40);
+	if (!pluto->io_mem) {
+		ret = -EIO;
+		goto err_pci_release_regions;
+	}
+
+	pci_set_drvdata(pdev, pluto);
+
+	ret = request_irq(pdev->irq, pluto_irq, SA_SHIRQ, DRIVER_NAME, pluto);
+	if (ret < 0)
+		goto err_pci_iounmap;
+
+	ret = pluto_hw_init(pluto);
+	if (ret < 0)
+		goto err_free_irq;
+
+	/* i2c */
+	i2c_set_adapdata(&pluto->i2c_adap, pluto);
+	strcpy(pluto->i2c_adap.name, DRIVER_NAME);
+	pluto->i2c_adap.owner = THIS_MODULE;
+	pluto->i2c_adap.id = I2C_ALGO_BIT;
+	pluto->i2c_adap.class = I2C_CLASS_TV_DIGITAL;
+	pluto->i2c_adap.dev.parent = &pdev->dev;
+	pluto->i2c_adap.algo_data = &pluto->i2c_bit;
+	pluto->i2c_bit.data = pluto;
+	pluto->i2c_bit.setsda = pluto_setsda;
+	pluto->i2c_bit.setscl = pluto_setscl;
+	pluto->i2c_bit.getsda = pluto_getsda;
+	pluto->i2c_bit.getscl = pluto_getscl;
+	pluto->i2c_bit.udelay = 10;
+	pluto->i2c_bit.timeout = 10;
+
+	/* Raise SCL and SDA */
+	pluto_setsda(pluto, 1);
+	pluto_setscl(pluto, 1);
+
+	ret = i2c_bit_add_bus(&pluto->i2c_adap);
+	if (ret < 0)
+		goto err_pluto_hw_exit;
+
+	/* dvb */
+	ret = dvb_register_adapter(&pluto->dvb_adapter, DRIVER_NAME, THIS_MODULE);
+	if (ret < 0)
+		goto err_i2c_bit_del_bus;
+
+	dvb_adapter = &pluto->dvb_adapter;
+
+	pluto_read_rev(pluto);
+	pluto_read_serial(pluto);
+	pluto_read_mac(pluto, dvb_adapter->proposed_mac);
+
+	dvbdemux = &pluto->demux;
+	dvbdemux->filternum = 256;
+	dvbdemux->feednum = 256;
+	dvbdemux->start_feed = pluto_start_feed;
+	dvbdemux->stop_feed = pluto_stop_feed;
+	dvbdemux->dmx.capabilities = (DMX_TS_FILTERING |
+			DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING);
+	ret = dvb_dmx_init(dvbdemux);
+	if (ret < 0)
+		goto err_dvb_unregister_adapter;
+
+	dmx = &dvbdemux->dmx;
+
+	pluto->hw_frontend.source = DMX_FRONTEND_0;
+	pluto->mem_frontend.source = DMX_MEMORY_FE;
+	pluto->dmxdev.filternum = NHWFILTERS;
+	pluto->dmxdev.demux = dmx;
+
+	ret = dvb_dmxdev_init(&pluto->dmxdev, dvb_adapter);
+	if (ret < 0)
+		goto err_dvb_dmx_release;
+
+	ret = dmx->add_frontend(dmx, &pluto->hw_frontend);
+	if (ret < 0)
+		goto err_dvb_dmxdev_release;
+
+	ret = dmx->add_frontend(dmx, &pluto->mem_frontend);
+	if (ret < 0)
+		goto err_remove_hw_frontend;
+
+	ret = dmx->connect_frontend(dmx, &pluto->hw_frontend);
+	if (ret < 0)
+		goto err_remove_mem_frontend;
+
+	ret = frontend_init(pluto);
+	if (ret < 0)
+		goto err_disconnect_frontend;
+
+	dvb_net_init(dvb_adapter, &pluto->dvbnet, dmx);
+out:
+	return ret;
+
+err_disconnect_frontend:
+	dmx->disconnect_frontend(dmx);
+err_remove_mem_frontend:
+	dmx->remove_frontend(dmx, &pluto->mem_frontend);
+err_remove_hw_frontend:
+	dmx->remove_frontend(dmx, &pluto->hw_frontend);
+err_dvb_dmxdev_release:
+	dvb_dmxdev_release(&pluto->dmxdev);
+err_dvb_dmx_release:
+	dvb_dmx_release(dvbdemux);
+err_dvb_unregister_adapter:
+	dvb_unregister_adapter(dvb_adapter);
+err_i2c_bit_del_bus:
+	i2c_bit_del_bus(&pluto->i2c_adap);
+err_pluto_hw_exit:
+	pluto_hw_exit(pluto);
+err_free_irq:
+	free_irq(pdev->irq, pluto);
+err_pci_iounmap:
+	pci_iounmap(pdev, pluto->io_mem);
+err_pci_release_regions:
+	pci_release_regions(pdev);
+err_pci_disable_device:
+	pci_disable_device(pdev);
+err_kfree:
+	pci_set_drvdata(pdev, NULL);
+	kfree(pluto);
+	goto out;
+}
+
+static void __devexit pluto2_remove(struct pci_dev *pdev)
+{
+	struct pluto *pluto = pci_get_drvdata(pdev);
+	struct dvb_adapter *dvb_adapter = &pluto->dvb_adapter;
+	struct dvb_demux *dvbdemux = &pluto->demux;
+	struct dmx_demux *dmx = &dvbdemux->dmx;
+
+	dmx->close(dmx);
+	dvb_net_release(&pluto->dvbnet);
+	if (pluto->fe)
+		dvb_unregister_frontend(pluto->fe);
+
+	dmx->disconnect_frontend(dmx);
+	dmx->remove_frontend(dmx, &pluto->mem_frontend);
+	dmx->remove_frontend(dmx, &pluto->hw_frontend);
+	dvb_dmxdev_release(&pluto->dmxdev);
+	dvb_dmx_release(dvbdemux);
+	dvb_unregister_adapter(dvb_adapter);
+	i2c_bit_del_bus(&pluto->i2c_adap);
+	pluto_hw_exit(pluto);
+	free_irq(pdev->irq, pluto);
+	pci_iounmap(pdev, pluto->io_mem);
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+	pci_set_drvdata(pdev, NULL);
+	kfree(pluto);
+}
+
+#ifndef PCI_VENDOR_ID_SCM
+#define PCI_VENDOR_ID_SCM	0x0432
+#endif
+#ifndef PCI_DEVICE_ID_PLUTO2
+#define PCI_DEVICE_ID_PLUTO2	0x0001
+#endif
+
+static struct pci_device_id pluto2_id_table[] __devinitdata = {
+	{
+		.vendor = PCI_VENDOR_ID_SCM,
+		.device = PCI_DEVICE_ID_PLUTO2,
+		.subvendor = PCI_ANY_ID,
+		.subdevice = PCI_ANY_ID,
+	}, {
+		/* empty */
+	},
+};
+
+MODULE_DEVICE_TABLE(pci, pluto2_id_table);
+
+static struct pci_driver pluto2_driver = {
+	.name = DRIVER_NAME,
+	.id_table = pluto2_id_table,
+	.probe = pluto2_probe,
+	.remove = __devexit_p(pluto2_remove),
+};
+
+static int __init pluto2_init(void)
+{
+	return pci_register_driver(&pluto2_driver);
+}
+
+static void __exit pluto2_exit(void)
+{
+	pci_unregister_driver(&pluto2_driver);
+}
+
+module_init(pluto2_init);
+module_exit(pluto2_exit);
+
+MODULE_AUTHOR("Andreas Oberritter <obi@linuxtv.org>");
+MODULE_DESCRIPTION("Pluto2 driver");
+MODULE_LICENSE("GPL");
Index: linux-2.6.12-git8/drivers/media/dvb/pluto2/Makefile
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.12-git8/drivers/media/dvb/pluto2/Makefile	2005-06-27 13:23:09.000000000 +0200
@@ -0,0 +1,3 @@
+obj-$(CONFIG_DVB_PLUTO2) = pluto2.o
+
+EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
Index: linux-2.6.12-git8/drivers/media/dvb/pluto2/Kconfig
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.12-git8/drivers/media/dvb/pluto2/Kconfig	2005-06-27 13:23:09.000000000 +0200
@@ -0,0 +1,16 @@
+config DVB_PLUTO2
+	tristate "Pluto2 cards"
+	depends on DVB_CORE && PCI
+	select I2C
+	select I2C_ALGOBIT
+	select DVB_TDA1004X
+	help
+	  Support for PCI cards based on the Pluto2 FPGA like the Satelco
+	  Easywatch Mobile Terrestrial DVB-T Receiver.
+
+          Since these cards have no MPEG decoder onboard, they transmit
+	  only compressed MPEG data over the PCI bus, so you need
+	  an external software decoder to watch TV on your computer.
+
+	  Say Y or M if you own such a device and want to use it.
+

--