From: Alexey Dobriyan <adobriyan@gmail.com>
To: kernel-janitors@vger.kernel.org
Subject: [KJ] [PATCH 1/15] FlashPoint: remove unused things
Date: Wed, 06 Jul 2005 23:15:51 +0000 [thread overview]
Message-ID: <200507070315.51096.adobriyan@gmail.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 34035 bytes --]
* Remove unused #define's
* Remove unused typedefs.
* Remove prototypes for non-existing functions.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
---
drivers/scsi/FlashPoint.c | 351 ----------------------------------------------
1 files changed, 4 insertions(+), 347 deletions(-)
Index: linux-flashpoint/drivers/scsi/FlashPoint.c
===================================================================
--- linux-flashpoint.orig/drivers/scsi/FlashPoint.c 2005-07-06 15:00:42.000000000 +0400
+++ linux-flashpoint/drivers/scsi/FlashPoint.c 2005-07-06 23:25:04.000000000 +0400
@@ -47,15 +47,10 @@
#define SccbMgr_isr FlashPoint_HandleInterrupt
-#define MAX_CDBLEN 12
-#define SCAM_LEV_2 1
#define CRCMASK 0xA001
-#define BL_VENDOR_ID 0x104B
-#define FP_DEVICE_ID 0x8130
-#define MM_DEVICE_ID 0x1040
#define FAILURE 0xFFFFFFFFL
@@ -65,15 +60,9 @@ typedef unsigned char UCHAR;
typedef unsigned short USHORT;
typedef unsigned int UINT;
typedef unsigned long ULONG;
-typedef unsigned char * PUCHAR;
-typedef unsigned short* PUSHORT;
-typedef unsigned long * PULONG;
-typedef void * PVOID;
-typedef unsigned char * uchar_ptr;
typedef unsigned short * ushort_ptr;
-typedef unsigned long * ulong_ptr;
#define s08bits char
@@ -84,9 +73,6 @@ typedef unsigned long * ulong_
#define u16bits unsigned s16bits
#define u32bits unsigned s32bits
-typedef u08bits * pu08bits;
-typedef u16bits * pu16bits;
-typedef u32bits * pu32bits;
#define BIT(x) ((UCHAR)(1<<(x))) /* single-bit mask in bit position x */
@@ -144,10 +130,6 @@ typedef SCCBMGR_INFO * PSCCBMGR_INF
#define HARPOON_FAMILY 0x02
-#define ISA_BUS_CARD 0x01
-#define EISA_BUS_CARD 0x02
-#define PCI_BUS_CARD 0x03
-#define VESA_BUS_CARD 0x04
/* SCCB struc used for both SCCB and UCB manager compiles!
* The UCB Manager treats the SCCB as it's 'native hardware structure'
@@ -200,14 +182,11 @@ typedef struct _SCCB {
ULONG Sccb_SGoffset;
} SCCB;
-#define SCCB_SIZE sizeof(SCCB)
#pragma pack()
-#define SCSI_INITIATOR_COMMAND 0x00
-#define TARGET_MODE_COMMAND 0x01
#define SCATTER_GATHER_COMMAND 0x02
#define RESIDUAL_COMMAND 0x03
#define RESIDUAL_SG_COMMAND 0x04
@@ -216,12 +195,10 @@ typedef struct _SCCB {
#define F_USE_CMD_Q 0x20 /*Inidcates TAGGED command. */
#define TAG_TYPE_MASK 0xC0 /*Type of tag msg to send. */
-#define TAG_Q_MASK 0xE0
#define SCCB_DATA_XFER_OUT 0x10 /* Write */
#define SCCB_DATA_XFER_IN 0x08 /* Read */
-#define FOURTEEN_BYTES 0x00 /* Request Sense Buffer size */
#define NO_AUTO_REQUEST_SENSE 0x01 /* No Request Sense Buffer */
@@ -235,9 +212,7 @@ typedef struct _SCCB {
#define DATA_OUT_ST 7
#define DATA_IN_ST 8
#define DISCONNECT_ST 9
-#define STATUS_ST 10
#define ABORT_ST 11
-#define MESSAGE_ST 12
#define F_HOST_XFER_DIR 0x01
@@ -249,7 +224,6 @@ typedef struct _SCCB {
#define F_STATUSLOADED 0x01
-#define F_MSGLOADED 0x02
#define F_DEV_SELECTED 0x04
@@ -257,56 +231,39 @@ typedef struct _SCCB {
#define SCCB_DATA_UNDER_RUN 0x0C
#define SCCB_SELECTION_TIMEOUT 0x11 /* Set SCSI selection timed out */
#define SCCB_DATA_OVER_RUN 0x12
-#define SCCB_UNEXPECTED_BUS_FREE 0x13 /* Target dropped SCSI BSY */
#define SCCB_PHASE_SEQUENCE_FAIL 0x14 /* Target bus phase sequence failure */
-#define SCCB_INVALID_OP_CODE 0x16 /* SCCB invalid operation code */
-#define SCCB_INVALID_SCCB 0x1A /* Invalid SCCB - bad parameter */
#define SCCB_GROSS_FW_ERR 0x27 /* Major problem! */
#define SCCB_BM_ERR 0x30 /* BusMaster error. */
#define SCCB_PARITY_ERR 0x34 /* SCSI parity error */
-#define SCCB_INVALID_DIRECTION 0x18 /* Invalid target direction */
-#define SCCB_DUPLICATE_SCCB 0x19 /* Duplicate SCCB */
-#define SCCB_SCSI_RST 0x35 /* SCSI RESET detected. */
#define SCCB_IN_PROCESS 0x00
#define SCCB_SUCCESS 0x01
#define SCCB_ABORT 0x02
-#define SCCB_NOT_FOUND 0x03
#define SCCB_ERROR 0x04
-#define SCCB_INVALID 0x05
-#define SCCB_SIZE sizeof(SCCB)
#define ORION_FW_REV 3110
-#define HARP_REVD 1
#define QUEUE_DEPTH 254+1 /*1 for Normal disconnect 32 for Q'ing. */
#define MAX_MB_CARDS 4 /* Max. no of cards suppoerted on Mother Board */
-#define WIDE_SCSI 1
#define MAX_SCSI_TAR 16
#define MAX_LUN 32
#define LUN_MASK 0x1f
-#if defined(HARP_REVA)
-#define SG_BUF_CNT 15 /*Number of prefetched elements. */
-#else
#define SG_BUF_CNT 16 /*Number of prefetched elements. */
-#endif
#define SG_ELEMENT_SIZE 8 /*Eight byte per element. */
-#define SG_LOCAL_MASK 0x00000000L
-#define SG_ELEMENT_MASK 0xFFFFFFFFL
#define RD_HARPOON(ioport) OS_InPortByte((u32bits)ioport)
@@ -318,31 +275,25 @@ typedef struct _SCCB {
#define TAR_SYNC_MASK (BIT(7)+BIT(6))
-#define SYNC_UNKNOWN 0x00
#define SYNC_TRYING BIT(6)
#define SYNC_SUPPORTED (BIT(7)+BIT(6))
#define TAR_WIDE_MASK (BIT(5)+BIT(4))
-#define WIDE_DISABLED 0x00
#define WIDE_ENABLED BIT(4)
#define WIDE_NEGOCIATED BIT(5)
#define TAR_TAG_Q_MASK (BIT(3)+BIT(2))
-#define TAG_Q_UNKNOWN 0x00
#define TAG_Q_TRYING BIT(2)
#define TAG_Q_REJECT BIT(3)
-#define TAG_Q_SUPPORTED (BIT(3)+BIT(2))
#define TAR_ALLOW_DISC BIT(0)
#define EE_SYNC_MASK (BIT(0)+BIT(1))
-#define EE_SYNC_ASYNC 0x00
#define EE_SYNC_5MB BIT(0)
#define EE_SYNC_10MB BIT(1)
#define EE_SYNC_20MB (BIT(0)+BIT(1))
-#define EE_ALLOW_DISC BIT(6)
#define EE_WIDE_SCSI BIT(7)
@@ -418,7 +369,6 @@ typedef struct SCCBcard *PSCCBcard;
#define ID_STRING_LENGTH 32
#define TYPE_CODE0 0x63 /*Level2 Mstr (bits 7-6), */
-#define TYPE_CODE1 00 /*No ID yet */
#define SLV_TYPE_CODE0 0xA3 /*Priority Bit set (bits 7-6), */
@@ -430,16 +380,9 @@ typedef struct SCCBcard *PSCCBcard;
#define ID_0_7 0x18
#define ID_8_F 0x11
-#define ID_10_17 0x12
-#define ID_18_1F 0x0B
#define MISC_CODE 0x14
#define CLR_P_FLAG 0x18
-#define LOCATE_ON 0x12
-#define LOCATE_OFF 0x0B
-#define LVL_1_MST 0x00
-#define LVL_2_MST 0x40
-#define DOM_LVL_2 0xC0
#define INIT_SELTD 0x01
@@ -455,64 +398,24 @@ typedef struct SCCBscam_info {
UCHAR id_string[ID_STRING_LENGTH];
enum scam_id_st state;
-} SCCBSCAM_INFO, *PSCCBSCAM_INFO;
+} SCCBSCAM_INFO;
-#define SCSI_TEST_UNIT_READY 0x00
-#define SCSI_REZERO_UNIT 0x01
#define SCSI_REQUEST_SENSE 0x03
-#define SCSI_FORMAT_UNIT 0x04
-#define SCSI_REASSIGN 0x07
#define SCSI_READ 0x08
#define SCSI_WRITE 0x0A
-#define SCSI_SEEK 0x0B
-#define SCSI_INQUIRY 0x12
-#define SCSI_MODE_SELECT 0x15
-#define SCSI_RESERVE_UNIT 0x16
-#define SCSI_RELEASE_UNIT 0x17
-#define SCSI_MODE_SENSE 0x1A
#define SCSI_START_STOP_UNIT 0x1B
-#define SCSI_SEND_DIAGNOSTIC 0x1D
-#define SCSI_READ_CAPACITY 0x25
#define SCSI_READ_EXTENDED 0x28
#define SCSI_WRITE_EXTENDED 0x2A
-#define SCSI_SEEK_EXTENDED 0x2B
#define SCSI_WRITE_AND_VERIFY 0x2E
-#define SCSI_VERIFY 0x2F
-#define SCSI_READ_DEFECT_DATA 0x37
-#define SCSI_WRITE_BUFFER 0x3B
-#define SCSI_READ_BUFFER 0x3C
-#define SCSI_RECV_DIAGNOSTIC 0x1C
-#define SCSI_READ_LONG 0x3E
-#define SCSI_WRITE_LONG 0x3F
-#define SCSI_LAST_SCSI_CMND SCSI_WRITE_LONG
-#define SCSI_INVALID_CMND 0xFF
#define SSGOOD 0x00
#define SSCHECK 0x02
-#define SSCOND_MET 0x04
-#define SSBUSY 0x08
-#define SSRESERVATION_CONFLICT 0x18
-#define SSCMD_TERM 0x22
#define SSQ_FULL 0x28
-#define SKNO_SEN 0x00
-#define SKRECOV_ERR 0x01
-#define SKNOT_RDY 0x02
-#define SKMED_ERR 0x03
-#define SKHW_ERR 0x04
-#define SKILL_REQ 0x05
-#define SKUNIT_ATTN 0x06
-#define SKDATA_PROTECT 0x07
-#define SKBLNK_CHK 0x08
-#define SKCPY_ABORT 0x0A
-#define SKABORT_CMD 0x0B
-#define SKEQUAL 0x0C
-#define SKVOL_OVF 0x0D
-#define SKMIS_CMP 0x0E
#define SMCMD_COMP 0x00
@@ -520,7 +423,6 @@ typedef struct SCCBscam_info {
#define SMSAVE_DATA_PTR 0x02
#define SMREST_DATA_PTR 0x03
#define SMDISC 0x04
-#define SMINIT_DETEC_ERR 0x05
#define SMABORT 0x06
#define SMREJECT 0x07
#define SMNO_OP 0x08
@@ -535,35 +437,22 @@ typedef struct SCCBscam_info {
#define SMSYNC 0x01
-#define SM10MBS 0x19 /* 100ns */
-#define SM5MBS 0x32 /* 200ns */
-#define SMOFFSET 0x0F /* Maxoffset value */
#define SMWDTR 0x03
#define SM8BIT 0x00
#define SM16BIT 0x01
-#define SM32BIT 0x02
#define SMIGNORWR 0x23 /* Ignore Wide Residue */
-#define ARBITRATION_DELAY 0x01 /* 2.4us using a 40Mhz clock */
-#define BUS_SETTLE_DELAY 0x01 /* 400ns */
-#define BUS_CLEAR_DELAY 0x01 /* 800ns */
-#define SPHASE_TO 0x0A /* 10 second timeout waiting for */
-#define SCMD_TO 0x0F /* Overall command timeout */
#define SIX_BYTE_CMD 0x06
-#define TEN_BYTE_CMD 0x0A
#define TWELVE_BYTE_CMD 0x0C
#define ASYNC 0x00
-#define PERI25NS 0x06 /* 25/4ns to next clock for xbow. */
-#define SYNC10MBS 0x19
-#define SYNC5MBS 0x32
#define MAX_OFFSET 0x0F /* Maxbyteoffset for Sync Xfers */
@@ -572,19 +461,11 @@ typedef struct SCCBscam_info {
#define EEPROM_CHECK_SUM 0
#define FW_SIGNATURE 2
#define MODEL_NUMB_0 4
-#define MODEL_NUMB_1 5
#define MODEL_NUMB_2 6
-#define MODEL_NUMB_3 7
#define MODEL_NUMB_4 8
-#define MODEL_NUMB_5 9
-#define IO_BASE_ADDR 10
-#define IRQ_NUMBER 12
-#define PCI_INT_PIN 13
-#define BUS_DELAY 14 /*On time in byte 14 off delay in 15 */
#define SYSTEM_CONFIG 16
#define SCSI_CONFIG 17
#define BIOS_CONFIG 18
-#define SPIN_UP_DELAY 19
#define SCAM_CONFIG 20
#define ADAPTER_SCSI_ID 24
@@ -609,7 +490,6 @@ typedef struct SCCBscam_info {
- #define DOM_MASTER (BIT(0) + BIT(1))
#define SCAM_ENABLED BIT(2)
#define SCAM_LEVEL2 BIT(3)
@@ -644,16 +524,9 @@ typedef struct SCCBscam_info {
/* Sub Vendor ID and Sub Device ID only available in
Harpoon Version 2 and higher */
- #define hp_sub_vendor_id_0 0x04 /* LSB */
- #define hp_sub_vendor_id_1 0x05 /* MSB */
#define hp_sub_device_id_0 0x06 /* LSB */
- #define hp_sub_device_id_1 0x07 /* MSB */
- #define hp_dual_addr_lo 0x08
- #define hp_dual_addr_lmi 0x09
- #define hp_dual_addr_hmi 0x0A
- #define hp_dual_addr_hi 0x0B
#define hp_semaphore 0x0C
#define SCCB_MGR_ACTIVE BIT(0)
@@ -661,9 +534,7 @@ typedef struct SCCBscam_info {
#define SCCB_MGR_PRESENT BIT(3)
#define BIOS_IN_USE BIT(4)
- #define hp_user_defined_D 0x0D
- #define hp_reserved_E 0x0E
#define hp_sys_ctrl 0x0F
@@ -671,95 +542,49 @@ typedef struct SCCBscam_info {
#define DRVR_RST BIT(1) /*Firmware Reset to 80C15 chip */
#define HALT_MACH BIT(3) /*Halt State Machine */
#define HARD_ABORT BIT(4) /*Hard Abort */
- #define DIAG_MODE BIT(5) /*Diagnostic Mode */
- #define BM_ABORT_TMOUT 0x50 /*Halt State machine time out */
- #define hp_sys_cfg 0x10
- #define DONT_RST_FIFO BIT(7) /*Don't reset FIFO */
- #define hp_host_ctrl0 0x11
- #define DUAL_ADDR_MODE BIT(0) /*Enable 64-bit addresses */
- #define IO_MEM_SPACE BIT(1) /*I/O Memory Space */
- #define RESOURCE_LOCK BIT(2) /*Enable Resource Lock */
- #define IGNOR_ACCESS_ERR BIT(3) /*Ignore Access Error */
- #define HOST_INT_EDGE BIT(4) /*Host interrupt level/edge mode sel */
- #define SIX_CLOCKS BIT(5) /*6 Clocks between Strobe */
- #define DMA_EVEN_PARITY BIT(6) /*Enable DMA Enen Parity */
-/*
- #define BURST_MODE BIT(0)
-*/
- #define hp_reserved_12 0x12
#define hp_host_blk_cnt 0x13
- #define XFER_BLK1 0x00 /* 0 0 0 1 byte per block*/
- #define XFER_BLK2 0x01 /* 0 0 1 2 byte per block*/
- #define XFER_BLK4 0x02 /* 0 1 0 4 byte per block*/
- #define XFER_BLK8 0x03 /* 0 1 1 8 byte per block*/
- #define XFER_BLK16 0x04 /* 1 0 0 16 byte per block*/
- #define XFER_BLK32 0x05 /* 1 0 1 32 byte per block*/
#define XFER_BLK64 0x06 /* 1 1 0 64 byte per block*/
#define BM_THRESHOLD 0x40 /* PCI mode can only xfer 16 bytes*/
- #define hp_reserved_14 0x14
- #define hp_reserved_15 0x15
- #define hp_reserved_16 0x16
#define hp_int_mask 0x17
#define INT_CMD_COMPL BIT(0) /* DMA command complete */
#define INT_EXT_STATUS BIT(1) /* Extended Status Set */
- #define INT_SCSI BIT(2) /* Scsi block interrupt */
- #define INT_FIFO_RDY BIT(4) /* FIFO data ready */
#define hp_xfer_cnt_lo 0x18
- #define hp_xfer_cnt_mi 0x19
#define hp_xfer_cnt_hi 0x1A
#define hp_xfer_cmd 0x1B
#define XFER_HOST_DMA 0x00 /* 0 0 0 Transfer Host -> DMA */
#define XFER_DMA_HOST 0x01 /* 0 0 1 Transfer DMA -> Host */
- #define XFER_HOST_MPU 0x02 /* 0 1 0 Transfer Host -> MPU */
- #define XFER_MPU_HOST 0x03 /* 0 1 1 Transfer MPU -> Host */
- #define XFER_DMA_MPU 0x04 /* 1 0 0 Transfer DMA -> MPU */
- #define XFER_MPU_DMA 0x05 /* 1 0 1 Transfer MPU -> DMA */
- #define SET_SEMAPHORE 0x06 /* 1 1 0 Set Semaphore */
- #define XFER_NOP 0x07 /* 1 1 1 Transfer NOP */
- #define XFER_MB_MPU 0x06 /* 1 1 0 Transfer MB -> MPU */
- #define XFER_MB_DMA 0x07 /* 1 1 1 Transfer MB -> DMA */
#define XFER_HOST_AUTO 0x00 /* 0 0 Auto Transfer Size */
- #define XFER_HOST_8BIT 0x08 /* 0 1 8 BIT Transfer Size */
- #define XFER_HOST_16BIT 0x10 /* 1 0 16 BIT Transfer Size */
- #define XFER_HOST_32BIT 0x18 /* 1 1 32 BIT Transfer Size */
#define XFER_DMA_8BIT 0x20 /* 0 1 8 BIT Transfer Size */
- #define XFER_DMA_16BIT 0x40 /* 1 0 16 BIT Transfer Size */
#define DISABLE_INT BIT(7) /*Do not interrupt at end of cmd. */
#define HOST_WRT_CMD ((DISABLE_INT + XFER_HOST_DMA + XFER_HOST_AUTO + XFER_DMA_8BIT))
#define HOST_RD_CMD ((DISABLE_INT + XFER_DMA_HOST + XFER_HOST_AUTO + XFER_DMA_8BIT))
- #define WIDE_HOST_WRT_CMD ((DISABLE_INT + XFER_HOST_DMA + XFER_HOST_AUTO + XFER_DMA_16BIT))
- #define WIDE_HOST_RD_CMD ((DISABLE_INT + XFER_DMA_HOST + XFER_HOST_AUTO + XFER_DMA_16BIT))
#define hp_host_addr_lo 0x1C
- #define hp_host_addr_lmi 0x1D
#define hp_host_addr_hmi 0x1E
- #define hp_host_addr_hi 0x1F
- #define hp_pio_data 0x20
- #define hp_reserved_21 0x21
#define hp_ee_ctrl 0x22
#define EXT_ARB_ACK BIT(7)
@@ -777,17 +602,8 @@ typedef struct SCCBscam_info {
#define EWDS 0x04
#define EWDS_ADDR 0x0000
- #define hp_brdctl 0x23
- #define DAT_7 BIT(7)
- #define DAT_6 BIT(6)
- #define DAT_5 BIT(5)
- #define BRD_STB BIT(4)
- #define BRD_CS BIT(3)
- #define BRD_WR BIT(2)
- #define hp_reserved_24 0x24
- #define hp_reserved_25 0x25
@@ -796,70 +612,36 @@ typedef struct SCCBscam_info {
#define SCSI_TERM_ENA_L BIT(0) /*Enable/Disable external terminators */
#define FLUSH_XFER_CNTR BIT(1) /*Flush transfer counter */
- #define BM_XFER_MIN_8 BIT(2) /*Enable bus master transfer of 9 */
- #define BIOS_ENA BIT(3) /*Enable BIOS/FLASH Enable */
#define FORCE1_XFER BIT(5) /*Always xfer one byte in byte mode */
#define FAST_SINGLE BIT(6) /*?? */
#define BMCTRL_DEFAULT (FORCE1_XFER|FAST_SINGLE|SCSI_TERM_ENA_L)
- #define hp_reserved_27 0x27
#define hp_sg_addr 0x28
#define hp_page_ctrl 0x29
#define SCATTER_EN BIT(0)
#define SGRAM_ARAM BIT(1)
- #define BIOS_SHADOW BIT(2)
#define G_INT_DISABLE BIT(3) /* Enable/Disable all Interrupts */
#define NARROW_SCSI_CARD BIT(4) /* NARROW/WIDE SCSI config pin */
- #define hp_reserved_2A 0x2A
- #define hp_pci_cmd_cfg 0x2B
- #define IO_SPACE_ENA BIT(0) /*enable I/O space */
- #define MEM_SPACE_ENA BIT(1) /*enable memory space */
- #define BUS_MSTR_ENA BIT(2) /*enable bus master operation */
- #define MEM_WI_ENA BIT(4) /*enable Write and Invalidate */
- #define PAR_ERR_RESP BIT(6) /*enable parity error responce. */
- #define hp_reserved_2C 0x2C
#define hp_pci_stat_cfg 0x2D
- #define DATA_PARITY_ERR BIT(0)
- #define REC_TARGET_ABORT BIT(4) /*received Target abort */
#define REC_MASTER_ABORT BIT(5) /*received Master abort */
- #define SIG_SYSTEM_ERR BIT(6)
- #define DETECTED_PAR_ERR BIT(7)
- #define hp_reserved_2E 0x2E
- #define hp_sys_status 0x2F
- #define SLV_DATA_RDY BIT(0) /*Slave data ready */
- #define XFER_CNT_ZERO BIT(1) /*Transfer counter = 0 */
- #define BM_FIFO_EMPTY BIT(2) /*FIFO empty */
- #define BM_FIFO_FULL BIT(3) /*FIFO full */
- #define HOST_OP_DONE BIT(4) /*host operation done */
- #define DMA_OP_DONE BIT(5) /*DMA operation done */
- #define SLV_OP_DONE BIT(6) /*Slave operation done */
- #define PWR_ON_FLAG BIT(7) /*Power on flag */
- #define hp_reserved_30 0x30
- #define hp_host_status0 0x31
- #define HOST_TERM BIT(5) /*Host Terminal Count */
- #define HOST_TRSHLD BIT(6) /*Host Threshold */
- #define CONNECTED_2_HOST BIT(7) /*Connected to Host */
- #define hp_reserved_32 0x32
#define hp_rev_num 0x33
- #define REV_A_CONST 0x0E
- #define REV_B_CONST 0x0E
#define hp_stack_data 0x34
#define hp_stack_addr 0x35
@@ -869,8 +651,6 @@ typedef struct SCCBscam_info {
#define BM_FORCE_OFF BIT(0) /*Bus Master is forced to get off */
#define PCI_TGT_ABORT BIT(0) /*PCI bus master transaction aborted */
#define PCI_DEV_TMOUT BIT(1) /*PCI Device Time out */
- #define FIFO_TC_NOT_ZERO BIT(2) /*FIFO or transfer counter not zero */
- #define CHIP_RST_OCCUR BIT(3) /*Chip reset occurs */
#define CMD_ABORTED BIT(4) /*Command aborted */
#define BM_PARITY_ERR BIT(5) /*parity error on data received */
#define PIO_OVERRUN BIT(6) /*Slave data overrun */
@@ -880,24 +660,13 @@ typedef struct SCCBscam_info {
#define hp_int_status 0x37
- #define BM_CMD_CMPL BIT(0) /*Bus Master command complete */
#define EXT_STATUS_ON BIT(1) /*Extended status is valid */
#define SCSI_INTERRUPT BIT(2) /*Global indication of a SCSI int. */
- #define BM_FIFO_RDY BIT(4)
#define INT_ASSERTED BIT(5) /* */
- #define SRAM_BUSY BIT(6) /*Scatter/Gather RAM busy */
- #define CMD_REG_BUSY BIT(7)
#define hp_fifo_cnt 0x38
- #define hp_curr_host_cnt 0x39
- #define hp_reserved_3A 0x3A
- #define hp_fifo_in_addr 0x3B
-
- #define hp_fifo_out_addr 0x3C
- #define hp_reserved_3D 0x3D
- #define hp_reserved_3E 0x3E
- #define hp_reserved_3F 0x3F
+
@@ -937,9 +706,7 @@ typedef struct SCCBscam_info {
#define SCSI_IOBIT BIT(0)
#define S_SCSI_PHZ (BIT(2)+BIT(1)+BIT(0))
- #define S_CMD_PH (BIT(2) )
#define S_MSGO_PH (BIT(2)+BIT(1) )
- #define S_STAT_PH (BIT(2) +BIT(0))
#define S_MSGI_PH (BIT(2)+BIT(1)+BIT(0))
#define S_DATAI_PH ( BIT(0))
#define S_DATAO_PH 0x00
@@ -947,7 +714,6 @@ typedef struct SCCBscam_info {
#define hp_scsictrl_0 0x45
- #define NO_ARB BIT(7)
#define SEL_TAR BIT(6)
#define ENA_ATN BIT(4)
#define ENA_RESEL BIT(2)
@@ -969,44 +735,33 @@ typedef struct SCCBscam_info {
#define hp_scsireset 0x47
- #define SCSI_TAR BIT(7)
#define SCSI_INI BIT(6)
#define SCAM_EN BIT(5)
- #define ACK_HOLD BIT(4)
#define DMA_RESET BIT(3)
#define HPSCSI_RESET BIT(2)
#define PROG_RESET BIT(1)
#define FIFO_CLR BIT(0)
#define hp_xfercnt_0 0x48
- #define hp_xfercnt_1 0x49
#define hp_xfercnt_2 0x4A
- #define hp_xfercnt_3 0x4B
#define hp_fifodata_0 0x4C
- #define hp_fifodata_1 0x4D
#define hp_addstat 0x4E
#define SCAM_TIMER BIT(7)
- #define AUTO_RUNNING BIT(6)
- #define FAST_SYNC BIT(5)
#define SCSI_MODE8 BIT(3)
#define SCSI_PAR_ERR BIT(0)
#define hp_prgmcnt_0 0x4F
- #define AUTO_PC_MASK 0x3F
#define hp_selfid_0 0x50
#define hp_selfid_1 0x51
#define hp_arb_id 0x52
- #define ARB_ID (BIT(3) + BIT(2) + BIT(1) + BIT(0))
#define hp_select_id 0x53
- #define RESEL_ID (BIT(7) + BIT(6) + BIT(5) + BIT(4))
- #define SELECT_ID (BIT(3) + BIT(2) + BIT(1) + BIT(0))
#define hp_synctarg_base 0x54
#define hp_synctarg_12 0x54
@@ -1029,63 +784,38 @@ typedef struct SCCBscam_info {
#define hp_synctarg_2 0x62
#define hp_synctarg_3 0x63
- #define RATE_20MB 0x00
- #define RATE_10MB ( BIT(5))
- #define RATE_6_6MB ( BIT(6) )
- #define RATE_5MB ( BIT(6)+BIT(5))
- #define RATE_4MB (BIT(7) )
- #define RATE_3_33MB (BIT(7) +BIT(5))
- #define RATE_2_85MB (BIT(7)+BIT(6) )
- #define RATE_2_5MB (BIT(7)+BIT(5)+BIT(6))
- #define NEXT_CLK BIT(5)
- #define SLOWEST_SYNC (BIT(7)+BIT(6)+BIT(5))
#define NARROW_SCSI BIT(4)
- #define SYNC_OFFSET (BIT(3) + BIT(2) + BIT(1) + BIT(0))
- #define DEFAULT_ASYNC 0x00
#define DEFAULT_OFFSET 0x0F
#define hp_autostart_0 0x64
#define hp_autostart_1 0x65
- #define hp_autostart_2 0x66
#define hp_autostart_3 0x67
- #define DISABLE 0x00
#define AUTO_IMMED BIT(5)
#define SELECT BIT(6)
- #define RESELECT (BIT(6)+BIT(5))
- #define BUSFREE BIT(7)
- #define XFER_0 (BIT(7)+BIT(5))
#define END_DATA (BIT(7)+BIT(6))
- #define MSG_PHZ (BIT(7)+BIT(6)+BIT(5))
#define hp_gp_reg_0 0x68
#define hp_gp_reg_1 0x69
- #define hp_gp_reg_2 0x6A
#define hp_gp_reg_3 0x6B
#define hp_seltimeout 0x6C
- #define TO_2ms 0x54 /* 2.0503ms */
#define TO_4ms 0x67 /* 3.9959ms */
#define TO_5ms 0x03 /* 4.9152ms */
#define TO_10ms 0x07 /* 11.xxxms */
#define TO_250ms 0x99 /* 250.68ms */
#define TO_290ms 0xB1 /* 289.99ms */
- #define TO_350ms 0xD6 /* 350.62ms */
- #define TO_417ms 0xFF /* 417.79ms */
#define hp_clkctrl_0 0x6D
#define PWR_DWN BIT(6)
#define ACTdeassert BIT(4)
- #define ATNonErr BIT(3)
- #define CLK_30MHZ BIT(1)
#define CLK_40MHZ (BIT(1) + BIT(0))
- #define CLK_50MHZ BIT(2)
#define CLKCTRL_DEFAULT (ACTdeassert | CLK_40MHZ)
@@ -1095,38 +825,21 @@ typedef struct SCCBscam_info {
#define hp_offsetctr 0x70
#define hp_xferstat 0x71
- #define FIFO_FULL BIT(7)
#define FIFO_EMPTY BIT(6)
- #define FIFO_MASK 0x3F /* Mask for the FIFO count value. */
- #define FIFO_LEN 0x20
#define hp_portctrl_1 0x72
- #define EVEN_HOST_P BIT(5)
- #define INVT_SCSI BIT(4)
#define CHK_SCSI_P BIT(3)
#define HOST_MODE8 BIT(0)
- #define HOST_MODE16 0x00
#define hp_xfer_pad 0x73
#define ID_UNLOCK BIT(3)
- #define XFER_PAD BIT(2)
#define hp_scsidata_0 0x74
#define hp_scsidata_1 0x75
- #define hp_timer_0 0x76
- #define hp_timer_1 0x77
- #define hp_reserved_78 0x78
- #define hp_reserved_79 0x79
- #define hp_reserved_7A 0x7A
- #define hp_reserved_7B 0x7B
-
- #define hp_reserved_7C 0x7C
- #define hp_reserved_7D 0x7D
- #define hp_reserved_7E 0x7E
- #define hp_reserved_7F 0x7F
+
#define hp_aramBase 0x80
#define BIOS_DATA_OFFSET 0x60
@@ -1135,22 +848,15 @@ typedef struct SCCBscam_info {
- #define AUTO_LEN 0x80
- #define AR0 0x00
- #define AR1 BITW(8)
- #define AR2 BITW(9)
#define AR3 (BITW(9) + BITW(8))
#define SDATA BITW(10)
- #define NOP_OP 0x00 /* Nop command */
#define CRD_OP BITW(11) /* Cmp Reg. w/ Data */
#define CRR_OP BITW(12) /* Cmp Reg. w. Reg. */
- #define CBE_OP (BITW(14)+BITW(12)+BITW(11)) /* Cmp SCSI cmd class & Branch EQ */
- #define CBN_OP (BITW(14)+BITW(13)) /* Cmp SCSI cmd class & Branch NOT EQ */
#define CPE_OP (BITW(14)+BITW(11)) /* Cmp SCSI phs & Branch EQ */
@@ -1163,7 +869,6 @@ typedef struct SCCBscam_info {
#define ASTATUS (BITW(10)+BITW(8))
#define AMSG_OUT (BITW(10)+BITW(9))
#define AMSG_IN (BITW(10)+BITW(9)+BITW(8))
- #define AILLEGAL (BITW(9)+BITW(8))
#define BRH_OP BITW(13) /* Branch */
@@ -1176,17 +881,11 @@ typedef struct SCCBscam_info {
#define TCB_OP (BITW(13)+BITW(11)) /* Test condition & branch */
- #define ATN_SET BITW(8)
- #define ATN_RESET BITW(9)
- #define XFER_CNT (BITW(9)+BITW(8))
#define FIFO_0 BITW(10)
- #define FIFO_NOT0 (BITW(10)+BITW(8))
- #define T_USE_SYNC0 (BITW(10)+BITW(9))
#define MPM_OP BITW(15) /* Match phase and move data */
- #define MDR_OP (BITW(12)+BITW(11)) /* Move data to Reg. */
#define MRR_OP BITW(14) /* Move DReg. to Reg. */
@@ -1196,34 +895,14 @@ typedef struct SCCBscam_info {
#define D_AR0 0x00
#define D_AR1 BIT(0)
- #define D_AR2 BIT(1)
- #define D_AR3 (BIT(1) + BIT(0))
- #define D_SDATA BIT(2)
#define D_BUCKET (BIT(2) + BIT(1) + BIT(0))
- #define ADR_OP (BITW(13)+BITW(12)) /* Logical AND Reg. w. Data */
- #define ADS_OP (BITW(14)+BITW(13)+BITW(12))
- #define ODR_OP (BITW(13)+BITW(12)+BITW(11))
- #define ODS_OP (BITW(14)+BITW(13)+BITW(12)+BITW(11))
- #define STR_OP (BITW(15)+BITW(14)) /* Store to A_Reg. */
-
- #define AINT_ENA1 0x00
- #define AINT_STAT1 BITW(8)
- #define ASCSI_SIG BITW(9)
- #define ASCSI_CNTL (BITW(9)+BITW(8))
- #define APORT_CNTL BITW(10)
- #define ARST_CNTL (BITW(10)+BITW(8))
- #define AXFERCNT0 (BITW(10)+BITW(9))
- #define AXFERCNT1 (BITW(10)+BITW(9)+BITW(8))
- #define AXFERCNT2 BITW(11)
- #define AFIFO_DATA (BITW(11)+BITW(8))
- #define ASCSISELID (BITW(11)+BITW(9))
- #define ASCSISYNC0 (BITW(11)+BITW(9)+BITW(8))
+
#define RAT_OP (BITW(14)+BITW(13)+BITW(11))
@@ -1233,7 +912,6 @@ typedef struct SCCBscam_info {
#define SSI_ITAR_DISC (ITAR_DISC >> 8)
#define SSI_IDO_STRT (IDO_STRT >> 8)
- #define SSI_IDI_STRT (IDO_STRT >> 8)
#define SSI_ICMD_COMP (ICMD_COMP >> 8)
#define SSI_ITICKLE (ITICKLE >> 8)
@@ -1248,13 +926,11 @@ typedef struct SCCBscam_info {
#define CMDPZ 0x04 /*Command phase */
#define DINT 0x12 /*Data Out/In interrupt */
#define DI 0x13 /*Data Out */
- #define MI 0x14 /*Message In */
#define DC 0x19 /*Disconnect Message */
#define ST 0x1D /*Status Phase */
#define UNKNWN 0x24 /*Unknown bus action */
#define CC 0x25 /*Command Completion failure */
#define TICK 0x26 /*New target reselected us. */
- #define RFAIL 0x27 /*Reselection failed */
#define SELCHK 0x28 /*Select & Check SCSI ID latch reg */
@@ -1268,25 +944,18 @@ typedef struct SCCBscam_info {
#define TAG_STRT 0x00
- #define SELECTION_START 0x00
#define DISCONNECT_START 0x10/2
#define END_DATA_START 0x14/2
- #define NONTAG_STRT 0x02/2
#define CMD_ONLY_STRT CMDPZ/2
- #define TICKLE_STRT TICK/2
#define SELCHK_STRT SELCHK/2
-#define mEEPROM_CLK_DELAY(port) (RD_HARPOON(port+hp_intstat_1))
-#define mWAIT_10MS(port) (RD_HARPOON(port+hp_intstat_1))
-#define CLR_XFER_CNT(port) (WR_HARPOON(port+hp_xfercnt_0, 0x00))
-#define SET_XFER_CNT(port, data) (WR_HARP32(port,hp_xfercnt_0,data))
#define GET_XFER_CNT(port, xfercnt) {RD_HARP32(port,hp_xfercnt_0,xfercnt); xfercnt &= 0xFFFFFF;}
/* #define GET_XFER_CNT(port, xfercnt) (xfercnt = RD_HARPOON(port+hp_xfercnt_2), \
@@ -1308,11 +977,7 @@ typedef struct SCCBscam_info {
#define ACCEPT_MSG_ATN(port) {while(RD_HARPOON(port+hp_scsisig) & SCSI_REQ){}\
WR_HARPOON(port+hp_scsisig, (S_ILL_PH|SCSI_ATN));}
-#define ACCEPT_STAT(port) {while(RD_HARPOON(port+hp_scsisig) & SCSI_REQ){}\
- WR_HARPOON(port+hp_scsisig, S_ILL_PH);}
-#define ACCEPT_STAT_ATN(port) {while(RD_HARPOON(port+hp_scsisig) & SCSI_REQ){}\
- WR_HARPOON(port+hp_scsisig, (S_ILL_PH|SCSI_ATN));}
#define DISABLE_AUTO(port) (WR_HARPOON(port+hp_scsireset, PROG_RESET),\
WR_HARPOON(port+hp_scsireset, 0x00))
@@ -1332,7 +997,6 @@ typedef struct SCCBscam_info {
-void scsiStartAuto(ULONG port);
static UCHAR FPT_sisyncn(ULONG port, UCHAR p_card, UCHAR syncFlag);
static void FPT_ssel(ULONG port, UCHAR p_card);
static void FPT_sres(ULONG port, UCHAR p_card, PSCCBcard pCurrCard);
@@ -1405,7 +1069,6 @@ static void FPT_DiagEEPROM(ULONG p_port
-void busMstrAbort(ULONG port);
static void FPT_dataXferProcessor(ULONG port, PSCCBcard pCurrCard);
static void FPT_busMstrSGDataXferStart(ULONG port, PSCCB pCurrSCCB);
static void FPT_busMstrDataXferStart(ULONG port, PSCCB pCurrSCCB);
@@ -1446,12 +1109,6 @@ static void FPT_autoLoadDefaultMap(ULON
-void OS_start_timer(unsigned long ioport, unsigned long timeout);
-void OS_stop_timer(unsigned long ioport, unsigned long timeout);
-void OS_disable_int(unsigned char intvec);
-void OS_enable_int(unsigned char intvec);
-void OS_delay(unsigned long count);
-int OS_VirtToPhys(u32bits CardHandle, u32bits *physaddr, u32bits *virtaddr);
static SCCBMGR_TAR_INFO FPT_sccbMgrTbl[MAX_CARDS][MAX_SCSI_TAR] = { { { 0 } } };
static SCCBCARD FPT_BL_Card[MAX_CARDS] = { { 0 } };
[-- Attachment #2: Type: text/plain, Size: 168 bytes --]
_______________________________________________
Kernel-janitors mailing list
Kernel-janitors@lists.osdl.org
https://lists.osdl.org/mailman/listinfo/kernel-janitors
reply other threads:[~2005-07-06 23:15 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200507070315.51096.adobriyan@gmail.com \
--to=adobriyan@gmail.com \
--cc=kernel-janitors@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.