All of lore.kernel.org
 help / color / mirror / Atom feed
From: raghavendra.koushik@neterion.com
To: jgarzik@pobox.com, netdev@oss.sgi.com
Cc: raghavendra.koushik@neterion.com,
	ravinandan.arakali@neterion.com, leonid.grossman@neterion.com,
	rapuru.sriram@neterion.com
Subject: [PATCH 2.6.12.1 8/12] S2io: VLAN support
Date: Thu,  7 Jul 2005 15:34:24 -0700 (PDT)	[thread overview]
Message-ID: <20050707223424.8EC3889826@linux.site> (raw)

Hi,
Patch below adds VLAN support to the driver.


Signed-off-by: Ravinandan Arakali <ravinandan.arakali@neterion.com>
Signed-off-by: Raghavendra Koushik <raghavendra.koushik@neterion.com>
---
diff -urpN vanilla_kernel/drivers/net/s2io.c linux-2.6.12-rc6/drivers/net/s2io.c
--- vanilla_kernel/drivers/net/s2io.c	2005-06-28 03:12:25.000000000 -0700
+++ linux-2.6.12-rc6/drivers/net/s2io.c	2005-06-28 03:14:54.000000000 -0700
@@ -54,6 +54,7 @@
 #include <linux/ethtool.h>
 #include <linux/version.h>
 #include <linux/workqueue.h>
+#include <linux/if_vlan.h>
 
 #include <asm/system.h>
 #include <asm/uaccess.h>
@@ -173,6 +174,30 @@ static char ethtool_stats_keys[][ETH_GST
 			timer.data = (unsigned long) arg;	\
 			mod_timer(&timer, (jiffies + exp))	\
 
+/* Add the vlan */
+static void s2io_vlan_rx_register(struct net_device *dev,
+					struct vlan_group *grp)
+{
+	nic_t *nic = dev->priv;
+	unsigned long flags;
+
+	spin_lock_irqsave(&nic->tx_lock, flags);
+	nic->vlgrp = grp;
+	spin_unlock_irqrestore(&nic->tx_lock, flags);
+}
+
+/* Unregister the vlan */
+static void s2io_vlan_rx_kill_vid(struct net_device *dev, unsigned long vid)
+{
+	nic_t *nic = dev->priv;
+	unsigned long flags;
+
+	spin_lock_irqsave(&nic->tx_lock, flags);
+	if (nic->vlgrp)
+		nic->vlgrp->vlan_devices[vid] = NULL;
+	spin_unlock_irqrestore(&nic->tx_lock, flags);
+}
+
 /*
  * Constants to be programmed into the Xena's registers, to configure
  * the XAUI.
@@ -2804,6 +2829,8 @@ int s2io_xmit(struct sk_buff *skb, struc
 #ifdef NETIF_F_TSO
 	int mss;
 #endif
+	u16 vlan_tag = 0;
+	int vlan_priority = 0;
 	mac_info_t *mac_control;
 	struct config_param *config;
 
@@ -2822,6 +2849,13 @@ int s2io_xmit(struct sk_buff *skb, struc
 
 	queue = 0;
 
+	/* Get Fifo number to Transmit based on vlan priority */
+	if (sp->vlgrp && vlan_tx_tag_present(skb)) {
+		vlan_tag = vlan_tx_tag_get(skb);
+		vlan_priority = vlan_tag >> 13;
+		queue = config->fifo_mapping[vlan_priority];
+	}
+
 	put_off = (u16) mac_control->fifos[queue].tx_curr_put_info.offset;
 	get_off = (u16) mac_control->fifos[queue].tx_curr_get_info.offset;
 	txdp = (TxD_t *) mac_control->fifos[queue].list_info[put_off].
@@ -2858,6 +2892,11 @@ int s2io_xmit(struct sk_buff *skb, struc
 
 	txdp->Control_2 |= config->tx_intr_type;
 
+	if (sp->vlgrp && vlan_tx_tag_present(skb)) {
+		txdp->Control_2 |= TXD_VLAN_ENABLE;
+		txdp->Control_2 |= TXD_VLAN_TAG(vlan_tag);
+	}
+
 	txdp->Control_1 |= (TXD_BUFFER0_SIZE(frg_len) |
 			    TXD_GATHER_CODE_FIRST);
 	txdp->Control_1 |= TXD_LIST_OWN_XENA;
@@ -4654,10 +4693,23 @@ static int rx_osm_handler(ring_info_t *r
 
 	skb->protocol = eth_type_trans(skb, dev);
 #ifdef CONFIG_S2IO_NAPI
-	netif_receive_skb(skb);
+	if (sp->vlgrp && RXD_GET_VLAN_TAG(rxdp->Control_2)) {
+		/* Queueing the vlan frame to the upper layer */
+		vlan_hwaccel_receive_skb(skb, sp->vlgrp,
+			RXD_GET_VLAN_TAG(rxdp->Control_2));
+	} else {
+		netif_receive_skb(skb);
+	}
 #else
-	netif_rx(skb);
+	if (sp->vlgrp && RXD_GET_VLAN_TAG(rxdp->Control_2)) {
+		/* Queueing the vlan frame to the upper layer */
+		vlan_hwaccel_rx(skb, sp->vlgrp,
+			RXD_GET_VLAN_TAG(rxdp->Control_2));
+	} else {
+		netif_rx(skb);
+	}
 #endif
+
 	dev->last_rx = jiffies;
 	atomic_dec(&sp->rx_bufs_left[ring_no]);
 	return SUCCESS;
@@ -4955,6 +5007,9 @@ s2io_init_nic(struct pci_dev *pdev, cons
 	dev->do_ioctl = &s2io_ioctl;
 	dev->change_mtu = &s2io_change_mtu;
 	SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
+	dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+	dev->vlan_rx_register = s2io_vlan_rx_register;
+	dev->vlan_rx_kill_vid = (void *)s2io_vlan_rx_kill_vid;
 
 	/*
 	 * will use eth_mac_addr() for  dev->set_mac_address
diff -urpN vanilla_kernel/drivers/net/s2io.h linux-2.6.12-rc6/drivers/net/s2io.h
--- vanilla_kernel/drivers/net/s2io.h	2005-06-28 03:12:25.000000000 -0700
+++ linux-2.6.12-rc6/drivers/net/s2io.h	2005-06-28 03:14:54.000000000 -0700
@@ -689,6 +689,8 @@ struct s2io_nic {
 #define CARD_UP 2
 	atomic_t card_state;
 	volatile unsigned long link_state;
+	struct vlan_group *vlgrp;
+
 	spinlock_t	rx_lock;
 	atomic_t	isr_cnt;
 };

                 reply	other threads:[~2005-07-07 22:34 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20050707223424.8EC3889826@linux.site \
    --to=raghavendra.koushik@neterion.com \
    --cc=jgarzik@pobox.com \
    --cc=leonid.grossman@neterion.com \
    --cc=netdev@oss.sgi.com \
    --cc=rapuru.sriram@neterion.com \
    --cc=ravinandan.arakali@neterion.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.