Re: 2.6.13-rc3-mm1 - breaks DRI

[Ed Tomlinson <tomlins@cam.org>]

Hi,

I just tried 13-rc2-mm1 and dri is working again.  Its reported to also work with 
13-rc3.  What in mm1 is apt to be breaking dri?

Thanks
Ed Tomlinson

----------  Forwarded Message  ----------

Subject: Re: Xorg and RADEON (dri disabled)
Date: Wednesday 20 July 2005 21:25
From: Ed Tomlinson <tomlins@cam.org>
To: debian-amd64@lists.debian.org
Cc: Michal Schmidt <xschmi00@stud.feec.vutbr.cz>

On Wednesday 20 July 2005 21:13, Michal Schmidt wrote:
> Ed Tomlinson wrote:
> > Hi,
> > 
> > With Xorg I get:
> > 
> > (==) RADEON(0): Write-combining range (0xd0000000,0x8000000)
> > drmOpenDevice: node name is /dev/dri/card0
> > drmOpenDevice: open result is -1, (No such device)
> > drmOpenDevice: open result is -1, (No such device)
> > drmOpenDevice: Open failed
> > drmOpenDevice: node name is /dev/dri/card0
> > drmOpenDevice: open result is -1, (No such device)
> > drmOpenDevice: open result is -1, (No such device)
> > drmOpenDevice: Open failed
> > drmOpenByBusid: Searching for BusID pci:0000:01:00.0
> > drmOpenDevice: node name is /dev/dri/card0
> > drmOpenDevice: open result is 7, (OK)
> > drmOpenByBusid: drmOpenMinor returns 7
> > drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
> > (II) RADEON(0): [drm] loaded kernel module for "radeon" driver
> > (II) RADEON(0): [drm] DRM interface version 1.2
> > (II) RADEON(0): [drm] created "radeon" driver at busid "pci:0000:01:00.0"
> > (II) RADEON(0): [drm] added 8192 byte SAREA at 0xffffc20000411000
> > (II) RADEON(0): [drm] drmMap failed
> > (EE) RADEON(0): [dri] DRIScreenInit failed.  Disabling DRI.
> > 
> > And glxgears reports 300 frames per second.  How do I get dri back?  It
> > was working fine with XFree.  The XF86Config-4 was changed by the upgrade
> > dropping some parms in the Device section.  Restoring them has no effect
> > on the problem.

> What kernel do you use? I get the same behaviour with 2.6.13-rc3-mm1, 
> but it works with 2.6.13-rc3.

I also use 2.6.13-rc3-mm1.  Will try with a previous version an report to lkml if
it works.

Thanks
Ed


-------------------------------------------------------