Re: grub-install

["Yoshinori K. Okuji" <okuji@enbug.org>]

On Tuesday 26 July 2005 20:41, Vincent Pelletier wrote:
> I'm afraid a stage 1 -like thing will be needed on usparc.

You are right. On SparcStation, the firmware loads only 512 bytes like PC as a 
boot sector. So you need to make boot.img separately. The difference is that 
there is no "safe place" in SparcStation, and you can choose a sector to be 
loaded in the firmware. You can get some information from the web site of 
SILO:

http://www.sparc-boot.org/how.html

> I have found 
> few docs about the actual implementation of the disk boot process on
> usparc, but it sounds like "load the second sector of disk, and run it"
> (the first sectors is filled with the partition table). I still have no
> success in making a bot floppy "by hand" (parted/fdisk + dd). I get a
> magic number error, while the crc in the partition table should be
> correct. I'll check that when I have more time, in 3~4 weeks.

Which model do you have? I hear that most UltraSparc models cannot boot from a 
floppy due to a bug in OpenBoot. Therefore, when I installed GNU/Linux into a 
UltraSparc machine, I used netboot.

Okuji