From: Andrew Morton <akpm@osdl.org>
To: "Martin J. Bligh" <mbligh@mbligh.org>
Cc: linux-kernel@vger.kernel.org, colpatch@us.ibm.com
Subject: Re: [PATCH] Fix NUMA node sizing in nr_free_zone_pages
Date: Fri, 29 Jul 2005 22:40:43 -0700 [thread overview]
Message-ID: <20050729224043.7ce56d4e.akpm@osdl.org> (raw)
In-Reply-To: <240970000.1122661910@[10.10.2.4]>
"Martin J. Bligh" <mbligh@mbligh.org> wrote:
>
> We are iterating over all nodes in nr_free_zone_pages(). Because the
> fallback zonelists contain all nodes in the system, and we walk all
> the zonelists, we're counting memory multiple times (once for each
> node). This caused us to make a size estimate of 32GB for an 8GB
> AMD64 box, which makes all the dirty ratio calculations, etc incorrect.
>
> There's still a further bug to fix from e820 holes causing overestimation
> as well, but this fix is separate, and good as is, and fixes one class
> of problems. Problem found by Badari, and tested by Ram Pai - thanks!
Alas my non-NUMA EMT64 box still gets it wrong.
nr_free_pagecache_pages() is still returning 1572864 on a 4G box.
Bootdata ok (command line is ro root=/dev/sda3)
Linux version 2.6.13-rc4-mm1 (akpm@x) (gcc version 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #134 SMP PREEMPT Fri Jul 29 21:38:37 PDT 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ebbd0 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007ffd0000 (usable)
BIOS-e820: 000000007ffd0000 - 000000007ffdf000 (ACPI data)
BIOS-e820: 000000007ffdf000 - 0000000080000000 (ACPI NVS)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000180000000 (usable)
ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000f6710
ACPI: RSDT (v001 A M I OEMRSDT 0x05000427 MSFT 0x00000097) @ 0x000000007ffd0000
ACPI: FADT (v002 A M I OEMFACP 0x05000427 MSFT 0x00000097) @ 0x000000007ffd0200
ACPI: MADT (v001 A M I OEMAPIC 0x05000427 MSFT 0x00000097) @ 0x000000007ffd0390
ACPI: MCFG (v001 Intel Cayuse 0x00000001 MSFT 0x00000001) @ 0x000000007ffd0420
ACPI: OEMB (v001 A M I AMI_OEM 0x05000427 MSFT 0x00000097) @ 0x000000007ffdf040
ACPI: HPET (v001 A M I OEMHPET 0x05000427 MSFT 0x00000097) @ 0x000000007ffd7460
ACPI: DSDT (v001 CYCRB CYCRB039 0x00000039 INTL 0x02002026) @ 0x0000000000000000
On node 0 totalpages: 1572864
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 1568768 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:3 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
Processor #6 15:3 APIC version 16
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
Processor #1 15:3 APIC version 16
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled)
Processor #7 15:3 APIC version 16
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec81000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec81000, GSI 24-47
ACPI: IOAPIC (id[0x0a] address[0xfec81400] gsi_base[48])
IOAPIC[2]: apic_id 10, version 32, address 0xfec81400, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: HPET id: 0x8086a202 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
Checking aperture...
Built 1 zonelists
Initializing CPU#0
Kernel command line: ro root=/dev/sda3
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 14.318180 MHz HPET timer.
time.c: Detected 3400.235 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Placing software IO TLB between 0x706d000 - 0x906d000
Memory: 4056592k/6291456k available (2892k kernel code, 136908k reserved, 1528k data, 192k init)
Calibrating delay using timer specific routine.. 6806.09 BogoMIPS (lpj=13612190)
Mount-cache hash table entries: 256
total_pages=1572864
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU0: Thermal monitoring enabled (TM1)
mtrr: v2.0 (20020519)
tbxface-0120 [02] acpi_load_tables : ACPI Tables successfully acquired
Parsing all Control Methods:..................................................................................................................................
Table [DSDT](id 0004) - 461 Objects with 50 Devices 130 Methods 11 Regions
ACPI Namespace successfully loaded at root ffffffff805b1060
evxfevnt-0096 [03] acpi_enable : Transition to ACPI mode successful
Using local APIC timer interrupts.
Detected 12.500 MHz APIC timer.
softlockup thread 0 started up.
Booting processor 1/4 APIC 0x6
Initializing CPU#1
Calibrating delay using timer specific routine.. 6800.36 BogoMIPS (lpj=13600721)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 3
CPU1: Thermal monitoring enabled (TM1)
Intel(R) Xeon(TM) CPU 3.40GHz stepping 04
APIC error on CPU1: 00(40)
CPU 1: Syncing TSC to CPU 0.
Booting processor 2/4 APIC 0x1
softlockup thread 1 started up.
CPU 1: synchronized TSC with CPU 0 (last diff 8 cycles, maxerr 1267 cycles)
Initializing CPU#2
Calibrating delay using timer specific routine.. 6799.74 BogoMIPS (lpj=13599492)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU2: Thermal monitoring enabled (TM1)
Intel(R) Xeon(TM) CPU 3.40GHz stepping 04
APIC error on CPU2: 00(40)
CPU 2: Syncing TSC to CPU 0.
softlockup thread 2 started up.
CPU 2: synchronized TSC with CPU 0 (last diff 2 cycles, maxerr 782 cycles)
Booting processor 3/4 APIC 0x7
Initializing CPU#3
Calibrating delay using timer specific routine.. 6800.24 BogoMIPS (lpj=13600482)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 3
CPU3: Thermal monitoring enabled (TM1)
Intel(R) Xeon(TM) CPU 3.40GHz stepping 04
APIC error on CPU3: 00(40)
CPU 3: Syncing TSC to CPU 0.
Brought up 4 CPUs
time.c: Using HPET/TSC based timekeeping.
softlockup thread 3 started up.
CPU 3: synchronized TSC with CPU 0 (last diff 13 cycles, maxerr 1454 cycles)
testing NMI watchdog ... OK.
-> [0][1][ 65536] 0.0 [ 0.0] (1): ( 30802 15401)
-> [0][1][ 68985] 0.0 [ 0.0] (1): ( 28878 8662)
-> [0][1][ 72615] 0.0 [ 0.0] (1): ( 31982 5883)
-> [0][1][ 76436] 0.0 [ 0.0] (1): ( 33671 3786)
-> [0][1][ 80458] 0.0 [ 0.0] (1): ( 36464 3289)
-> [0][1][ 84692] 0.0 [ 0.0] (1): ( 37640 2232)
-> [0][1][ 89149] 0.0 [ 0.0] (1): ( 41782 3187)
-> [0][1][ 93841] 0.0 [ 0.0] (1): ( 43251 2328)
-> [0][1][ 98780] 0.0 [ 0.0] (1): ( 49783 4430)
-> [0][1][ 103978] 0.0 [ 0.0] (1): ( 48679 2767)
-> [0][1][ 109450] 0.0 [ 0.0] (1): ( 49901 1994)
-> [0][1][ 115210] 0.0 [ 0.0] (1): ( 51129 1611)
-> [0][1][ 121273] 0.0 [ 0.0] (1): ( 58000 4241)
-> [0][1][ 127655] 0.0 [ 0.0] (1): ( 60912 3576)
-> [0][1][ 134373] 0.0 [ 0.0] (1): ( 64481 3572)
-> [0][1][ 141445] 0.0 [ 0.0] (1): ( 69376 4233)
-> [0][1][ 148889] 0.0 [ 0.0] (1): ( 70247 2552)
-> [0][1][ 156725] 0.0 [ 0.0] (1): ( 74568 3436)
-> [0][1][ 164973] 0.0 [ 0.0] (1): ( 72684 2660)
-> [0][1][ 173655] 0.0 [ 0.0] (1): ( 82089 6032)
-> [0][1][ 182794] 0.0 [ 0.0] (1): ( 86093 5018)
-> [0][1][ 192414] 0.0 [ 0.0] (1): ( 87915 3420)
-> [0][1][ 202541] 0.1 [ 0.1] (1): ( 105832 10668)
-> [0][1][ 213201] 0.1 [ 0.1] (1): ( 106195 5515)
-> [0][1][ 224422] 0.1 [ 0.1] (1): ( 115242 7281)
-> [0][1][ 236233] 0.1 [ 0.1] (1): ( 112956 4783)
-> [0][1][ 248666] 0.1 [ 0.1] (1): ( 119121 5474)
-> [0][1][ 261753] 0.1 [ 0.1] (1): ( 126591 6472)
-> [0][1][ 275529] 0.1 [ 0.1] (1): ( 125830 3616)
-> [0][1][ 290030] 0.1 [ 0.1] (1): ( 144454 11120)
-> [0][1][ 305294] 0.1 [ 0.1] (1): ( 149530 8098)
-> [0][1][ 321362] 0.1 [ 0.1] (1): ( 156193 7380)
-> [0][1][ 338275] 0.1 [ 0.1] (1): ( 169114 10150)
-> [0][1][ 356078] 0.1 [ 0.1] (1): ( 176278 8657)
-> [0][1][ 374818] 0.1 [ 0.1] (1): ( 180310 6344)
-> [0][1][ 394545] 0.1 [ 0.1] (1): ( 198031 12032)
-> [0][1][ 415310] 0.2 [ 0.2] (1): ( 206920 10460)
-> [0][1][ 437168] 0.2 [ 0.2] (1): ( 219614 11577)
-> [0][1][ 460176] 0.2 [ 0.2] (1): ( 228004 9983)
-> [0][1][ 484395] 0.2 [ 0.2] (1): ( 234777 8378)
-> [0][1][ 509889] 0.2 [ 0.2] (1): ( 248846 11223)
-> [0][1][ 536725] 0.2 [ 0.2] (1): ( 261244 11810)
-> [0][1][ 564973] 0.2 [ 0.2] (1): ( 286512 18539)
-> [0][1][ 594708] 0.2 [ 0.2] (1): ( 288002 10014)
-> [0][1][ 626008] 0.3 [ 0.3] (1): ( 305148 13580)
-> [0][1][ 658955] 0.3 [ 0.3] (1): ( 313304 10868)
-> [0][1][ 693636] 0.3 [ 0.3] (1): ( 339551 18557)
-> [0][1][ 730143] 0.3 [ 0.3] (1): ( 345809 12407)
-> [0][1][ 768571] 0.3 [ 0.3] (1): ( 393721 30159)
-> [0][1][ 809022] 0.4 [ 0.4] (1): ( 422795 29616)
-> [0][1][ 851602] 0.4 [ 0.4] (1): ( 434075 20448)
-> [0][1][ 896423] 0.4 [ 0.4] (1): ( 435383 10878)
-> [0][1][ 943603] 0.4 [ 0.4] (1): ( 479267 27381)
-> [0][1][ 993266] 0.4 [ 0.4] (1): ( 416849 44899)
-> [0][1][1045543] 0.4 [ 0.4] (1): ( 400165 30791)
-> [0][1][1100571] 0.4 [ 0.4] (1): ( 402364 16495)
-> [0][1][1158495] 0.3 [ 0.4] (1): ( 308598 55130)
-> [0][1][1219468] 0.0 [ 0.4] (1): ( 59030 152349)
-> [0][1][1283650] 0.0 [ 0.4] (1): ( 43242 84068)
-> found max.
[0][1] working set size found: 943603, cost: 479267
-> [0][2][ 65536] 0.0 [ 0.0] (0): ( 444 222)
-> [0][2][ 68985] 0.0 [ 0.0] (0): ( 36 315)
-> [0][2][ 72615] 0.0 [ 0.0] (0): ( 560 419)
-> [0][2][ 76436] 0.0 [ 0.0] (0): ( 2733 1296)
-> [0][2][ 80458] 0.0 [ 0.0] (0): ( 144 1942)
-> [0][2][ 84692] 0.0 [ 0.0] (0): ( 577 1187)
-> [0][2][ 89149] 0.0 [ 0.0] (0): ( 469 647)
-> [0][2][ 93841] 0.0 [ 0.0] (0): ( 1103 640)
-> [0][2][ 98780] 0.0 [ 0.0] (0): ( -415 1079)
-> [0][2][ 103978] 0.0 [ 0.0] (0): ( 2606 2050)
-> [0][2][ 109450] 0.0 [ 0.0] (0): ( 2440 1108)
-> [0][2][ 115210] 0.0 [ 0.0] (0): ( 2284 632)
-> [0][2][ 121273] 0.0 [ 0.0] (0): ( 2535 441)
-> [0][2][ 127655] 0.0 [ 0.0] (0): ( 183 1396)
-> found max.
[0][2] working set size found: 76436, cost: 2733
---------------------
| migration cost matrix (max_cache_size: 0, cpu: 3400 MHz):
---------------------
[00] [01] [02] [03]
[00]: - 0.9(1) 0.0(0) 0.9(1)
[01]: 0.9(1) - 0.9(1) 0.0(0)
[02]: 0.0(0) 0.9(1) - 0.9(1)
[03]: 0.9(1) 0.0(0) 0.9(1) -
--------------------------------
| cacheflush times [2]: 0.0 (5466) 0.9 (958534)
| calibration delay: 0 seconds
--------------------------------
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
PCI: Using MMCONFIG at e0000000
ACPI: Subsystem revision 20050708
evgpeblk-1019 [06] acpi_ev_create_gpe_blo: GPE 00 to 1F [_GPE] 4 regs on int 0x9
evgpeblk-1027 [06] acpi_ev_create_gpe_blo: Found 8 Wake, Enabled 0 Runtime GPEs in this block
Completing Region/Field/Buffer/Package initialization:..............................................................................................
Initialized 10/11 Regions 26/26 Fields 36/36 Buffers 22/23 Packages (470 nodes)
Executing all Device _STA and_INI methods:........................................................
56 Devices found containing: 56 _STA, 0 _INI methods
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
Boot video device is 0000:05:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.P2P3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.P2P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:02:00.0
IO window: d000-dfff
MEM window: fa400000-fa6fffff
PREFETCH window: bfe00000-bfefffff
PCI: Bridge: 0000:02:00.2
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.0
IO window: d000-dfff
MEM window: fa400000-fa8fffff
PREFETCH window: bfe00000-bfefffff
PCI: Bridge: 0000:00:04.0
IO window: disabled.
MEM window: fa900000-feafffff
PREFETCH window: bff00000-dfefffff
PCI: Bridge: 0000:00:1e.0
IO window: c000-cfff
MEM window: fa300000-fa3fffff
PREFETCH window: 80000000-800fffff
acpi_bus-0212 [01] acpi_bus_set_power : Device is not power manageable
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:03.0 to 64
acpi_bus-0212 [01] acpi_bus_set_power : Device is not power manageable
PCI: Setting latency timer of device 0000:02:00.0 to 64
acpi_bus-0212 [01] acpi_bus_set_power : Device is not power manageable
PCI: Setting latency timer of device 0000:02:00.2 to 64
acpi_bus-0212 [01] acpi_bus_set_power : Device is not power manageable
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 69ns tick, 3 64-bit timers
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Intel E7520/7320/7525 detected.<6>ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: CPU0 (power states: C1[C1])
ACPI: CPU1 (power states: C1[C1])
ACPI: CPU2 (power states: C1[C1])
ACPI: CPU3 (power states: C1[C1])
Real Time Clock Driver v1.12
hpet_acpi_add: no address or irqs in _CRS
hw_random hardware driver 1.0.0 loaded
Linux agpgart interface v0.101 (c) Dave Jones
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using monotonic_clock().
cn_fork is registered
cn_exit is registered
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
mice: PS/2 mouse device common for all mice
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 6.0.60-k2
Copyright (c) 1999-2005 Intel Corporation.
ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 17 (level, low) -> IRQ 17
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.35.
netconsole: not configured, aborting
ACPI: PCI Interrupt 0000:04:03.0[A] -> GSI 30 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:04:03.1[B] -> GSI 31 (level, low) -> IRQ 19
scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11
<Adaptec AIC7902 Ultra320 SCSI adapter>
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
(scsi0:A:5): 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit)
(scsi0:A:6): 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit)
Vendor: MAXTOR Model: ATLAS10K4_73WLS Rev: DFV0
Type: Direct-Access ANSI SCSI revision: 03
scsi0:A:5:0: Tagged Queuing enabled. Depth 64
Vendor: MAXTOR Model: ATLAS10K4_73WLS Rev: DFV0
Type: Direct-Access ANSI SCSI revision: 03
scsi0:A:6:0: Tagged Queuing enabled. Depth 64
scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11
<Adaptec AIC7902 Ultra320 SCSI adapter>
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
3ware Storage Controller device driver for Linux v1.26.02.001.
libata version 1.11 loaded.
ata_piix version 1.03
ata_piix: combined mode detected
ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xFC00 irq 14
ata1: dev 0 cfg 49:0b00 82:0210 83:1000 84:0000 85:0000 86:0000 87:0000 88:0407
ata1: dev 0 ATAPI, max UDMA/33
ata1: dev 0 configured for UDMA/33
scsi2 : ata_piix
isa bounce pool size: 16 pages
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xFC08 irq 15
ATA: abnormal status 0x7F on port 0x177
ata2: disabling port
scsi3 : ata_piix
SCSI device sda: 143666192 512-byte hdwr sectors (73557 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 143666192 512-byte hdwr sectors (73557 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4 < sda5 >
Attached scsi disk sda at scsi0, channel 0, id 5, lun 0
SCSI device sdb: 143666192 512-byte hdwr sectors (73557 MB)
SCSI device sdb: drive cache: write back
SCSI device sdb: 143666192 512-byte hdwr sectors (73557 MB)
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2
Attached scsi disk sdb at scsi0, channel 0, id 6, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 5, lun 0, type 0
Attached scsi generic sg1 at scsi0, channel 0, id 6, lun 0, type 0
usbmon: debugs is not available
acpi_bus-0212 [01] acpi_bus_set_power : Device is not power manageable
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: irq 21, io mem 0xfebff400
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e080
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000e400
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000e480
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
Intel 810 + AC97 Audio, version 1.01, 21:31:06 Jul 29 2005
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1f.5 to 64
i810: Intel ICH5 found at IO 0xe880 and 0xec00, MEM 0xfebffc00 and 0xfebff800, IRQ 17
i810: Intel ICH5 mmio at 0xffffc20000010c00 and 0xffffc20000012800
i810_audio: Primary codec has ID 0
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
i810_audio: Connection 0 with codec id 0
ac97_codec: AC97 Audio codec, id: ADS116 (Analog Devices AD1981B)
i810_audio: AC'97 codec 0 supports AMAP, total channels = 2
oprofile: using NMI interrupt.
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
TCP bic registered
TCP htcp registered
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 192k freed
Using generic hotkey driver
ibm_acpi: Using generic hotkey driver
toshiba_acpi: Using generic hotkey driver
EXT3 FS on sda3, internal journal
vm_dirty_ratio=40 unmapped_ratio=100 dirty_ratio=40
dirty_ratio=40 available_memory=1572864 dirty=629145
background_thresh=157286 dirty_thresh=629145 nr_dirty=581 nr_unstable=0 nr_reclaimable=581 wbs.nr_writeback=0
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 4096532k swap on /dev/sda5. Priority:-1 extents:1 across:4096532k
e1000: eth0: e1000_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex
eth0: no IPv6 routers present
next prev parent reply other threads:[~2005-07-30 5:42 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-07-29 18:31 [PATCH] Fix NUMA node sizing in nr_free_zone_pages Martin J. Bligh
2005-07-29 20:05 ` Andrew Morton
2005-07-30 5:40 ` Andrew Morton [this message]
2005-07-30 13:49 ` Martin J. Bligh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050729224043.7ce56d4e.akpm@osdl.org \
--to=akpm@osdl.org \
--cc=colpatch@us.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mbligh@mbligh.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.